Hi, this is an initial proposal to complete support for manually defining partition table. Some background on this. Many OEM on embedded device (modem, router...) are starting to migrate from NOR/NAND flash to eMMC. The reason for this is that OEM are starting to require more and more space for the firmware and price difference is becoming so little that using eMMC is only benefits and no cons. Given these reason, OEM are also using very custom way to provide a partition table and doesn't relay on common method like writing a table on the eMMC. One way that is commonly used is to hardcode the partition table and pass it to the system via various way (cmdline, special glue driver, block2mtd...) This way is also used on Android where the partition table is passed from the bootloader via cmdline. One reason to use this method is to save space on the device and to permit more flexibility on partition handling. What this series does is complete support for this feature. It's possible to use the cmdline to define a partition table similar to how it's done for MTD but this is problematic for a number of device where tweaking the cmdline is not possible. This series adds OF support to make it possible to define a partition table in the Device Tree. We implement a similar schema to the MTD fixed-partition, where we define a "label" and a "reg" with "offset" and "size". A new block partition parser is introduced that check if the disk device have an OF node attached and check if a fixed-partition table is defined. block driver can use the device_add_of_disk() function to register a new disk and attach a fwnode to it for usage with the OF parser. This permits flexibility from the driver side to implement the partitions node in different nodes across different block devices. If a correct node is found, then partition table is filled. cmdline will still have priority to this new parser. Some block device also implement boot1 and boot2 additional disk. Similar to the cmdline parser, these disk can have OF support using the "partitions-boot1" and "partitions-boot2" additional node. Also eMMC gp 1/2/3/4 disk are supported. It's also completed support for declaring partition as read-only as this feature was introduced but never finished in the cmdline parser. I hope this solution is better accepted as downstream this is becoming a real problem with a growing number of strange solution for the simple task of providing a fixed partition table. Changes v6: - Rename device_add_of_disk() to add_disk_fwnode() - Add kdocs for add_disk_fwnode() - Improve variables order in OF block partition code - Add Reviewed-by tag Changes v5: - Introduce device_add_of_disk() function - Detach eMMC special disk from OF block partition code and move parsing to eMMC block driver (as requested by Christoph) - Rework OF block partition to use the device disk device_node - Extend support for eMMC GP1/2/3/4 - Rename boot0/1 to boot1/2 - Drop strends patch (unused now) Changes v4: - Fix wrong description and title in Kconfig - Validate reg len with addr and size cells - Drop offset 0 constraint (not needed) - Rework bytes to sector conversion - Follow common logic with ignore partitions after state->limit - Better handle device_node put - Add suggested strends string helper Changes v3: - Out of RFC - Drop partition schema generalization and simplify it - Require fixed-partitions compatible to adapt to MTD schema - Make label property optional and fallback to node name Changes v2: - Reference bytes in DT instead of Sector Size - Validate offset and size after Sector Size conversion - Limit boot0 and boot1 to eMMC and add comments about JEDEC spec - Generalize MTD partition schema and introduce block partitions schema - Add missing code to actually attach the OF parser to block partition core - Add reviewed by tag for read-only patch Christian Marangi (6): block: add support for defining read-only partitions docs: block: Document support for read-only partition in cmdline part block: introduce add_disk_fwnode() mmc: block: attach partitions fwnode if found in mmc-card block: add support for partition table defined in OF dt-bindings: mmc: Document support for partition table in mmc-card Documentation/block/cmdline-partition.rst | 5 +- .../devicetree/bindings/mmc/mmc-card.yaml | 52 +++++++++ block/blk.h | 1 + block/genhd.c | 28 ++++- block/partitions/Kconfig | 9 ++ block/partitions/Makefile | 1 + block/partitions/check.h | 1 + block/partitions/cmdline.c | 3 + block/partitions/core.c | 6 + block/partitions/of.c | 110 ++++++++++++++++++ drivers/mmc/core/block.c | 55 ++++++++- include/linux/blkdev.h | 3 + 12 files changed, 268 insertions(+), 6 deletions(-) create mode 100644 block/partitions/of.c -- 2.45.2
