Hi, Ulf Sorry for bothering you. In this series of patches I have reached the final comments of the sdhci parts. Please help review this series of patches. I hope to get your feedback to confirm whether there are any needs to be modified. If you already have a closer look at a paragraph in the series, could you let me know your opinions first. I look forward to your reply. Thanks, Victor Shih On Wed, Sep 18, 2024 at 12:47 PM Adrian Hunter <adrian.hunter@xxxxxxxxx> wrote: > > On 13/09/24 13:28, Victor Shih wrote: > > From: Victor Shih <victor.shih@xxxxxxxxxxxxxxxxxxx> > > > > Summary > > ======= > > These patches[1] support UHS-II and fix GL9755 and GL9767 > > UHS-II compatibility. > > > > About UHS-II, roughly deal with the following three parts: > > 1) A UHS-II detection and initialization: > > - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup > > Sequence[2]). > > - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence > > [2]). > > - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include > > Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II > > Setting Register Setup Sequence. > > > > 2) Send Legacy SD command through SD-TRAN > > - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy > > SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1 > > Packet Types and Format Overview[3]). > > - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II > > CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). > > > > 3) UHS-II Interrupt > > - Except for UHS-II error interrupts, most interrupts share the original > > interrupt registers. > > > > Patch structure > > =============== > > patch#1-#7: for core > > patch#8-#20: for sdhci > > patch#21: for GL9755 > > patch#22: for GL9767 > > > > Tests > > ===== > > Ran 'dd' command to evaluate the performance 3 times: > > (SanDisk UHS-II card on GL9755 controller) > > Read Write > > UHS-II disabled (UHS-I): 85.5MB/s 56.3MB/s > > UHS-II enabled : 182MB/s 75.5MB/s > > Read Write > > UHS-II disabled (UHS-I): 86.7MB/s 52.1MB/s > > UHS-II enabled : 179MB/s 77.6MB/s > > Read Write > > UHS-II disabled (UHS-I): 85.8MB/s 49.1MB/s > > UHS-II enabled : 181MB/s 89.8MB/s > > (SanDisk UHS-II card on GL9767 controller) > > Read Write > > UHS-II disabled (UHS-I): 81.9MB/s 49.0MB/s > > UHS-II enabled : 186MB/s 87.9MB/s > > Read Write > > UHS-II disabled (UHS-I): 80.8MB/s 53.5MB/s > > UHS-II enabled : 192MB/s 87.3MB/s > > Read Write > > UHS-II disabled (UHS-I): 81.0MB/s 53.9MB/s > > UHS-II enabled : 199MB/s 73.6MB/s > > > > Test command > > ===== > > Read: dd if=/dev/mmcxxx of=/dev/null bs=4096k count=2000 iflag=direct > > Write:dd if=/dev/zero of=/dev/mmcxxx bs=4096k count=2000 oflag=direct > > > > Changes in v22 (September. 13, 2024) > > * Rebase on latest mmc/next. > > * Adjust patch order to avoid defined but nt used warnings: > > v21 patch#18 to v22 patch#14. > > v21 patch#14 to v22 patch#15. > > v21 patch#15 to v22 patch#16. > > v21 patch#16 to v22 patch#18. > > * Patch#14: Remove unnecessary code to avoid defined but not used warnings. > > * Patch#15: Add necessary code to avoid defined but not used warnings. > > * Patch#16: Remove unnecessary code to avoid defined but not used warnings. > > Modify commit message. > > * Patch#17: Remove unnecessary code to avoid defined but not used warnings. > > * Patch#18: Add necessary code to avoid defined but not used warnings. > > For SDHCI: > > Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx> > >
