sdhci_pci module is blocking low power s0ix sleep with GL9767

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

I have a problem with s0ix sleep on a laptop with GL9767 SD card reader.

The device is a TUXEDO InfinityBook Pro 14 Gen9 Intel laptop and consumes 6 watts in s2idle (not reaching s0ix). If I blacklist sdhci_pci in /etc/modprobe.d/blacklist.conf then the device sleeps with 1.2 watts (this is not super good, but OK). Unfortunately unloading and reloading does not work either. Once the module has been loaded, the high power consumption remains, even after a rmmod.

I tested this behavior with linux mainline 6.11, 6.11.0-rc7-next-20240909. Kernel mmc/next does not work either.

In an AMD device (InfinityBook Pro 14 Gen9 AMD), however, the same card reader sleeps without any problems.

Link https://bugzilla.kernel.org/show_bug.cgi?id=219284

Any ideas?

Kind regards
Georg Gottleuber




[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux