From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx> Add device tree bindings for IPQ5332 TLMM block. Signed-off-by: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx> --- .../bindings/pinctrl/qcom,ipq5424-tlmm.yaml | 115 ++++++++++++++++++ 1 file changed, 115 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq5424-tlmm.yaml diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5424-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5424-tlmm.yaml new file mode 100644 index 000000000000..a16d9725e368 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5424-tlmm.yaml @@ -0,0 +1,115 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq5424-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm IPQ5424 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@xxxxxxxxxx> + - Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> + +description: | + Top Level Mode Multiplexer pin controller in Qualcomm IPQ5424 SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,ipq5424-tlmm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 26 + + gpio-line-names: + maxItems: 50 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-ipq5424-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-ipq5424-tlmm-state" + additionalProperties: false + +$defs: + qcom-ipq5424-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: "^gpio([0-9]|[1-4][0-9])$" + minItems: 1 + maxItems: 50 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ atest_char, atest_char0, atest_char1, atest_char2, atest_char3, + atest_tic, audio_pri, audio_pri0, audio_pri1, audio_sec, + audio_sec0, audio_sec1, core_voltage, cri_trng0, cri_trng1, + cri_trng2, cri_trng3, cxc_clk, cxc_data, dbg_out, gcc_plltest, + gcc_tlmm, gpio, i2c0_scl, i2c0_sda, i2c1_scl, i2c1_sda, i2c11, + mac0, mac1, mdc_mst, mdc_slv, mdio_mst, mdio_slv, pcie0_clk, + pcie0_wake, pcie1_clk, pcie1_wake, pcie2_clk, pcie2_wake, + pcie3_clk, pcie3_wake, pll_test, prng_rosc0, prng_rosc1, + prng_rosc2, prng_rosc3, PTA0_0, PTA0_1, PTA0_2, PTA10, PTA11, + pwm0, pwm1, pwm2, qdss_cti_trig_in_a0, qdss_cti_trig_out_a0, + qdss_cti_trig_in_a1, qdss_cti_trig_out_a1, qdss_cti_trig_in_b0, + qdss_cti_trig_out_b0, qdss_cti_trig_in_b1, qdss_cti_trig_out_b1, + qdss_traceclk_a, qdss_tracectl_a, qdss_tracedata_a, qspi_clk, + qspi_cs, qspi_data, resout, rx0, rx1, rx2, sdc_clk, sdc_cmd, + sdc_data, spi0, spi1, spi10, spi11, tsens_max, uart0, uart1, + wci_txd, wci_rxd, wsi_clk, wsi_data ] + + required: + - pins + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq5424-tlmm"; + reg = <0x01000000 0x300000>; + gpio-controller; + #gpio-cells = <0x2>; + gpio-ranges = <&tlmm 0 0 50>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <0x2>; + + uart1_pins: uart1-state { + pins = "gpio43", "gpio44"; + function = "uart1"; + drive-strength = <8>; + bias-pull-up; + }; + }; -- 2.34.1
