[PATCH v6 3/9] mmc: core: Add open-ended Ext memory addressing

[Avri Altman <avri.altman@xxxxxxx>]

For open-ended read/write - just send CMD22 before issuing the command.
While at it, make sure that the rw command arg is properly casting the
lower 32 bits, as it can be larger now.

Signed-off-by: Avri Altman <avri.altman@xxxxxxx>
---
 drivers/mmc/core/block.c | 6 +++++-
 drivers/mmc/core/core.c  | 3 +++
 include/linux/mmc/core.h | 5 +++++
 3 files changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
index cc7318089cf2..54469261bc25 100644
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -226,6 +226,7 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
 static void mmc_blk_hsq_req_done(struct mmc_request *mrq);
 static int mmc_spi_err_check(struct mmc_card *card);
 static int mmc_blk_busy_cb(void *cb_data, bool *busy);
+static int mmc_blk_wait_for_idle(struct mmc_queue *mq, struct mmc_host *host);
 
 static struct mmc_blk_data *mmc_blk_get(struct gendisk *disk)
 {
@@ -1710,7 +1711,7 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
 
 	brq->mrq.cmd = &brq->cmd;
 
-	brq->cmd.arg = blk_rq_pos(req);
+	brq->cmd.arg = blk_rq_pos(req) & 0xFFFFFFFF;
 	if (!mmc_card_blockaddr(card))
 		brq->cmd.arg <<= 9;
 	brq->cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
@@ -1758,6 +1759,9 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
 			(do_data_tag ? (1 << 29) : 0);
 		brq->sbc.flags = MMC_RSP_R1 | MMC_CMD_AC;
 		brq->mrq.sbc = &brq->sbc;
+	} else if (mmc_card_ult_capacity(card)) {
+		brq->cmd.ext_addr = (blk_rq_pos(req) >> 32) & 0x3F;
+		brq->cmd.has_ext_addr = 1;
 	}
 }
 
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index d6c819dd68ed..a0b2999684b3 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -336,6 +336,9 @@ int mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
 {
 	int err;
 
+	if (mrq->cmd && mrq->cmd->has_ext_addr)
+		mmc_send_ext_addr(host, mrq->cmd->ext_addr);
+
 	init_completion(&mrq->cmd_completion);
 
 	mmc_retune_hold(host);
diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h
index f0ac2e469b32..41c21c216584 100644
--- a/include/linux/mmc/core.h
+++ b/include/linux/mmc/core.h
@@ -76,6 +76,11 @@ struct mmc_command {
  */
 #define mmc_cmd_type(cmd)	((cmd)->flags & MMC_CMD_MASK)
 
+	/* for SDUC */
+	u8 has_ext_addr;
+	u8 ext_addr;
+	u16 reserved;
+
 	unsigned int		retries;	/* max number of retries */
 	int			error;		/* command error */
 
-- 
2.25.1