On 22/08/24 17:58, Victor Shih wrote: > Hi, Ulf and Adrian > > Sorry for bothering you again, May I know the status of this series of patches? > Please help review this series of patches and let me know if there are > any that need to be modified. > I look forward to your reply. I noticed a few small things and replied to the relevent emails, but, as I wrote for V17, this is essentially OK from my point of view. > > Thanks, Victor Shih > > On Thu, Aug 15, 2024 at 6:26 PM Victor Shih <victorshihgli@xxxxxxxxx> wrote: >> >> Hi, Ulf >> >> Sorry for bothering you. >> Please help review this series of patches. >> I hope to get your feedback to confirm whether there are any needs to >> be modified. >> If you already have a closer look at a paragraph in the series, could >> you let me know your opinions first. >> I look forward to your reply. >> >> Thanks, Victor Shih >> >> Hi, Adrian >> >> Please help review this series of patches. >> In this series of patches, I only patch#17 file and patch#22. >> I look forward to receiving your reply. >> >> Thanks, Victor Shih >> >> On Fri, Aug 2, 2024 at 6:22 PM Victor Shih <victorshihgli@xxxxxxxxx> wrote: >>> >>> From: Victor Shih <victor.shih@xxxxxxxxxxxxxxxxxxx> >>> >>> Summary >>> ======= >>> These patches[1] support UHS-II and fix GL9755 and GL9767 >>> UHS-II compatibility. >>> >>> About UHS-II, roughly deal with the following three parts: >>> 1) A UHS-II detection and initialization: >>> - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup >>> Sequence[2]). >>> - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence >>> [2]). >>> - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include >>> Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II >>> Setting Register Setup Sequence. >>> >>> 2) Send Legacy SD command through SD-TRAN >>> - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy >>> SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1 >>> Packet Types and Format Overview[3]). >>> - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II >>> CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). >>> >>> 3) UHS-II Interrupt >>> - Except for UHS-II error interrupts, most interrupts share the original >>> interrupt registers. >>> >>> Patch structure >>> =============== >>> patch#1-#7: for core >>> patch#8-#20: for sdhci >>> patch#21: for GL9755 >>> patch#22: for GL9767 >>> >>> Tests >>> ===== >>> Ran 'dd' command to evaluate the performance: >>> (SanDisk UHS-II card on GL9755 controller) >>> Read Write >>> UHS-II disabled (UHS-I): 83.9MB/s 48.6MB/s >>> UHS-II enabled : 199MB/s 74.3MB/s >>> (SanDisk UHS-II card on GL9767 controller) >>> Read Write >>> UHS-II disabled (UHS-I): 83.6MB/s 50.1MB/s >>> UHS-II enabled : 183MB/s 77.8MB/s >>> >>> Changes in v18 (August. 02, 2024) >>> * Rebase on latest mmc/next. >>> * Patch#17: Modify the judgment condition in sdhci_uhs2_reset_cmd_data() >>> and replace it from mmc_card_uhs2() >>> to host->mmc->uhs2_sd_tran flag. >>> * Patch#22: Add new register settings for gl9767. >>> Add card_event in the sdhci_ops for gl9767. >>> Add sdhci_gl9767_set_card_detect_debounce_time() >>> to configure the gl9767. >>> Adjust the sdhci_gl9767_reset() process for gl9767. >>> >>> Reference >>> ========= >>> [1] https://gitlab.com/VictorShih/linux-uhs2.git >>> [2] SD Host Controller Simplified Specification 4.20 >>> [3] UHS-II Simplified Addendum 1.02 >>> [4] https://patchwork.kernel.org/project/linux-mmc/cover/20240620104444.5862-1-victorshihgli@xxxxxxxxx/ >>> >>> ----------------- original cover letter from v17 ----------------- >>> Summary >>> ======= >>> These patches[1] support UHS-II and fix GL9755 and GL9767 >>> UHS-II compatibility. >>> >>> About UHS-II, roughly deal with the following three parts: >>> 1) A UHS-II detection and initialization: >>> - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup >>> Sequence[2]). >>> - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence >>> [2]). >>> - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include >>> Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II >>> Setting Register Setup Sequence. >>> >>> 2) Send Legacy SD command through SD-TRAN >>> - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy >>> SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1 >>> Packet Types and Format Overview[3]). >>> - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II >>> CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). >>> >>> 3) UHS-II Interrupt >>> - Except for UHS-II error interrupts, most interrupts share the original >>> interrupt registers. >>> >>> Patch structure >>> =============== >>> patch#1-#7: for core >>> patch#8-#20: for sdhci >>> patch#21: for GL9755 >>> patch#22: for GL9767 >>> >>> Changes in v17 (June. 20, 2024) >>> * Rebase on latest mmc/next. >>> * Drop patch#8 of uhs2 patches series v16. >>> * Patch#11: Move the sdhci_uhs2_reset_cmd_data() to the other patch >>> it was used for the first time. >>> * Patch#12: Export sdhci_uhs2_set_power() function. >>> * Patch#16: Add new parameter to __sdhci_finish_data_common(). >>> * Patch#17: Add sdhci_uhs2_reset_cmd_data() and sdhci_uhs2_needs_reset() to >>> resolve the data error or cmd error. >>> * Patch#21: Rname gl9755_overcurrent_event_enable() to >>> sdhci_gli_overcurrent_event_enable(). >>> * Patch#22: Use mmc_card_uhs2() to simplify the code in the >>> sdhci_gl9767_reset(). >>> Use mmc_card_uhs2() to simplify the code in the >>> sdhci_gl9767_set_power(). >>> Add sdhci_gli_overcurrent_event_enable() to >>> sdhci_gl9767_set_power(). >>> >>> Reference >>> ========= >>> [1] https://gitlab.com/VictorShih/linux-uhs2.git >>> [2] SD Host Controller Simplified Specification 4.20 >>> [3] UHS-II Simplified Addendum 1.02 >>> [4] https://patchwork.kernel.org/project/linux-mmc/cover/20240522110909.10060-1-victorshihgli@xxxxxxxxx/ >>> >>> ----------------- original cover letter from v16 ----------------- >>> Summary >>> ======= >>> These patches[1] support UHS-II and fix GL9755 and GL9767 >>> UHS-II compatibility. >>> >>> About UHS-II, roughly deal with the following three parts: >>> 1) A UHS-II detection and initialization: >>> - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup >>> Sequence[2]). >>> - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence >>> [2]). >>> - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include >>> Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II >>> Setting Register Setup Sequence. >>> >>> 2) Send Legacy SD command through SD-TRAN >>> - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy >>> SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1 >>> Packet Types and Format Overview[3]). >>> - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II >>> CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). >>> >>> 3) UHS-II Interrupt >>> - Except for UHS-II error interrupts, most interrupts share the original >>> interrupt registers. >>> >>> Patch structure >>> =============== >>> patch#1-#8: for core >>> patch#9-#21: for sdhci >>> patch#22: for GL9755 >>> patch#23: for GL9767 >>> >>> Changes in v16 (May. 22, 2024) >>> * rebased to the linux-kernel-v6.9.0-rc2 in Ulf Hansson next branch. >>> * according to the comments provided by Adrian Hunter to modify the >>> patches base on the [V14 00/21] Add support UHS-II for GL9755. >>> * Patch#8: Separate the Error Recovery mechanism from patch#7 to patch#8. >>> * Patch#16: Remove irrelevant definition in the sdhci_calc_timeout_uhs2(). >>> >>> Reference >>> ========= >>> [1] https://gitlab.com/VictorShih/linux-uhs2.git >>> [2] SD Host Controller Simplified Specification 4.20 >>> [3] UHS-II Simplified Addendum 1.02 >>> [4] https://patchwork.kernel.org/project/linux-mmc/cover/20240123062827.8525-1-victorshihgli@xxxxxxxxx/ >>> >>> ----------------- original cover letter from v15 ----------------- >>> Summary >>> ======= >>> These patches[1] support UHS-II and fix GL9755 and GL9767 >>> UHS-II compatibility. >>> >>> About UHS-II, roughly deal with the following three parts: >>> 1) A UHS-II detection and initialization: >>> - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup >>> Sequence[2]). >>> - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence >>> [2]). >>> - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include >>> Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II >>> Setting Register Setup Sequence. >>> >>> 2) Send Legacy SD command through SD-TRAN >>> - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy >>> SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1 >>> Packet Types and Format Overview[3]). >>> - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II >>> CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). >>> >>> 3) UHS-II Interrupt >>> - Except for UHS-II error interrupts, most interrupts share the original >>> interrupt registers. >>> >>> Patch structure >>> =============== >>> patch#1-#7: for core >>> patch#8-#20: for sdhci >>> patch#21: for GL9755 >>> patch#22: for GL9767 >>> >>> Changes in v15 (April. 22, 2024) >>> * rebased to the linux-kernel-v6.9.0-rc2 in Ulf Hansson next branch. >>> * according to the comments provided by Adrian Hunter to modify the >>> patches base on the [V14 00/21] Add support UHS-II for GL9755. >>> * Patch#07: Move struct uhs2_command uhs2_cmd to struct mmc_request and >>> modify whatever other changers to make it work. >>> Refer the SD Host Controller Standard Specification >>> Section 3.10 to add Error Recovery mechanism to recover >>> the command error. >>> * Patch#11: Refer the SD Host Controller Standard Specification >>> Section 3.10 to add reset command data mechanism. >>> * Patch#15: Resolve merge conflicts and reduce unnecessary line breaks. >>> * Patch#16: Adjust the parameters used in the __sdhci_uhs2_finish_command() >>> to match changes in the Patch#7. >>> * Patch#21: Adjust gl9755_vendor_init() to the correct function. >>> * Patch#22: Add gl9767 to support uhs2 function. >>> >>> Reference >>> ========= >>> [1] https://gitlab.com/VictorShih/linux-uhs2.git >>> [2] SD Host Controller Simplified Specification 4.20 >>> [3] UHS-II Simplified Addendum 1.02 >>> [4] https://patchwork.kernel.org/project/linux-mmc/cover/20240123062827.8525-1-victorshihgli@xxxxxxxxx/ >>> >>> ----------------- original cover letter from v14 ----------------- >>> Summary >>> ======= >>> These patches[1] support UHS-II and fix GL9755 UHS-II compatibility. >>> >>> About UHS-II, roughly deal with the following three parts: >>> 1) A UHS-II detection and initialization: >>> - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup >>> Sequence[2]). >>> - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence >>> [2]). >>> - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include >>> Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II >>> Setting Register Setup Sequence. >>> >>> 2) Send Legacy SD command through SD-TRAN >>> - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy >>> SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1 >>> Packet Types and Format Overview[3]). >>> - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II >>> CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). >>> >>> 3) UHS-II Interrupt >>> - Except for UHS-II error interrupts, most interrupts share the original >>> interrupt registers. >>> >>> Patch structure >>> =============== >>> patch#1-#7: for core >>> patch#8-#20: for sdhci >>> patch#21: for GL9755 >>> >>> Changes in v14 (January. 23, 2024) >>> * rebased to the linux-kernel-v6.7.0-rc4 in Ulf Hansson next branch. >>> * according to the comments provided by Adrian Hunter to modify the >>> patches base on the [V13 00/21] Add support UHS-II for GL9755. >>> * Patch#03: Move mmc_card_uhs2() to include/linux/mmc/host.h, so that >>> mmc_card_uhs2() can be available for host drivers. >>> * Patch#10: Use mmc_card_uhs2() to stead sdhci_uhs2_mode() in the >>> sdhci_uhs2_dump_regs(). >>> * Patch#11: Since mmc_card_uhs2() is the same as sdhci_uhs2_mode(), so >>> drop sdhci_uhs2_mode() and use mmc_card_uhs2() instead of >>> sdhci_uhs2_mode(). >>> * Patch#13: Use mmc_card_uhs2() to stead sdhci_uhs2_mode() in the >>> sdhci_uhs2_set_timeout(). >>> * Patch#14: Use mmc_card_uhs2() to stead sdhci_uhs2_mode() in the >>> sdhci_uhs2_set_ios(). >>> * Patch#16: Use mmc_card_uhs2() to stead sdhci_uhs2_mode() in the >>> sdhci_uhs2_request(). >>> * Patch#17: Use mmc_card_uhs2() to stead sdhci_uhs2_mode() in the >>> sdhci_uhs2_complete_work(), sdhci_uhs2_irq() and >>> sdhci_uhs2_thread_irq(). >>> * Patch#18: Use mmc_card_uhs2() to stead sdhci_uhs2_mode() in the >>> __sdhci_uhs2_remove_host(). >>> >>> Reference >>> ========= >>> [1] https://gitlab.com/VictorShih/linux-uhs2.git >>> [2] SD Host Controller Simplified Specification 4.20 >>> [3] UHS-II Simplified Addendum 1.02 >>> [4] https://patchwork.kernel.org/project/linux-mmc/cover/20230915094351.11120-1-victorshihgli@xxxxxxxxx/ >>> >>> ----------------- original cover letter from v13 ----------------- >>> Summary >>> ======= >>> These patches[1] support UHS-II and fix GL9755 UHS-II compatibility. >>> >>> About UHS-II, roughly deal with the following three parts: >>> 1) A UHS-II detection and initialization: >>> - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup >>> Sequence[2]). >>> - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence >>> [2]). >>> - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include >>> Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II >>> Setting Register Setup Sequence. >>> >>> 2) Send Legacy SD command through SD-TRAN >>> - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy >>> SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1 >>> Packet Types and Format Overview[3]). >>> - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II >>> CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). >>> >>> 3) UHS-II Interrupt >>> - Except for UHS-II error interrupts, most interrupts share the original >>> interrupt registers. >>> >>> Patch structure >>> =============== >>> patch#1-#7: for core >>> patch#8-#20: for sdhci >>> patch#21: for GL9755 >>> >>> Changes in v13 (November. 17, 2023) >>> * rebased to the linux-kernel-v6.7.0-rc1 in Ulf Hansson next branch. >>> * according to the comments provided by Adrian Hunter to modify the >>> patches base on the [V12 00/23] Add support UHS-II for GL9755. >>> * according to the comments provided by Ulf Hansson to modify the >>> patches base on the [V12 00/23] Add support UHS-II for GL9755. >>> * Add new patch#6 to re-factoring the code. >>> * Patch#7: Separate __mmc_go_idle() into one patch for re-factorring the code. >>> Move mmc_decode_scr declaration to sd.h. >>> Ues uhs2_sd_tran to stead MMC_UHS2_SD_TRAN. >>> Drop unnecessary comment. >>> * Patch#11: Use ios timing to stead MMC_UHS2_SUPPORT for indicate the UHS2 mode. >>> * Patch#12: Drop use vmmc2. >>> Modify comment message. >>> * Patch#13: Modify comment message. >>> * Patch#14: Add judgment condition for power mode in the __sdhci_uhs2_set_ios(). >>> Modify comment message. >>> * Patch#15: Merge Patch#15, Patch#16 and Patch#17 of v12 version into Patch#15 in v13 version. >>> Use definitions to simplify code. >>> Modify comment message. >>> * Patch#16: Re-order function to avoid declaration. >>> Remove unnecessary function. >>> * Patch#17: Re-order function to avoid declaration. >>> Remove unnecessary definitions. >>> * Patch#18: Re-order function to avoid declaration. >>> Use vqmmc2 to stead vmmc2. >>> * Patch#21: Ues uhs2_sd_tran to stead MMC_UHS2_SD_TRAN. >>> >>> Reference >>> ========= >>> [1] https://gitlab.com/VictorShih/linux-uhs2.git >>> [2] SD Host Controller Simplified Specification 4.20 >>> [3] UHS-II Simplified Addendum 1.02 >>> [4] https://patchwork.kernel.org/project/linux-mmc/cover/20230915094351.11120-1-victorshihgli@xxxxxxxxx/ >>> >>> ----------------- original cover letter from v12 ----------------- >>> Summary >>> ======= >>> These patches[1] support UHS-II and fix GL9755 UHS-II compatibility. >>> >>> About UHS-II, roughly deal with the following three parts: >>> 1) A UHS-II detection and initialization: >>> - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup >>> Sequence[2]). >>> - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence >>> [2]). >>> - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include >>> Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II >>> Setting Register Setup Sequence. >>> >>> 2) Send Legacy SD command through SD-TRAN >>> - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy >>> SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1 >>> Packet Types and Format Overview[3]). >>> - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II >>> CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). >>> >>> 3) UHS-II Interrupt >>> - Except for UHS-II error interrupts, most interrupts share the original >>> interrupt registers. >>> >>> Patch structure >>> =============== >>> patch#1-#6: for core >>> patch#7-#22: for sdhci >>> patch#23: for GL9755 >>> >>> Changes in v12 (September. 15, 2023) >>> * rebased to the linux-kernel-v6.6.0-rc1 in Ulf Hansson next branch. >>> * according to the comments provided by Adrian Hunter to modify the >>> patches base on the [V11 00/23] Add support UHS-II for GL9755. >>> * according to the comments provided by Ulf Hansson to modify the >>> patches base on the [V11 00/23] Add support UHS-II for GL9755. >>> * Patch#5: Remove unused max_current_180_vdd2. >>> * Patch#6: Use mmc_op_multi() to check DCMD which supports multi >>> read/write in mmc_uhs2_prepare_cmd(). >>> >>> Reference >>> ========= >>> [1] https://gitlab.com/VictorShih/linux-uhs2.git >>> [2] SD Host Controller Simplified Specification 4.20 >>> [3] UHS-II Simplified Addendum 1.02 >>> [4] https://patchwork.kernel.org/project/linux-mmc/cover/20230908095330.12075-1-victorshihgli@xxxxxxxxx/ >>> >>> ----------------- original cover letter from v11 ----------------- >>> Summary >>> ======= >>> These patches[1] support UHS-II and fix GL9755 UHS-II compatibility. >>> >>> About UHS-II, roughly deal with the following three parts: >>> 1) A UHS-II detection and initialization: >>> - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup >>> Sequence[2]). >>> - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence >>> [2]). >>> - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include >>> Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II >>> Setting Register Setup Sequence. >>> >>> 2) Send Legacy SD command through SD-TRAN >>> - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy >>> SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1 >>> Packet Types and Format Overview[3]). >>> - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II >>> CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). >>> >>> 3) UHS-II Interrupt >>> - Except for UHS-II error interrupts, most interrupts share the original >>> interrupt registers. >>> >>> Patch structure >>> =============== >>> patch#1-#6: for core >>> patch#7-#22: for sdhci >>> patch#23: for GL9755 >>> >>> Changes in v11 (September. 08, 2023) >>> * rebased to the linux-kernel-v6.5.0-rc5 in Ulf Hansson next branch. >>> * according to the comments provided by Adrian Hunter to modify the >>> patches base on the [V10 00/23] Add support UHS-II for GL9755. >>> * Patch#18: Drop the check mmc_card_uhs2_hd_mode(host->mmc) >>> in sdhci_uhs2_set_transfer_mode(). >>> * Patch#20: Remove unused ocr_avail_uhs2. >>> >>> Reference >>> ========= >>> [1] https://gitlab.com/VictorShih/linux-uhs2.git >>> [2] SD Host Controller Simplified Specification 4.20 >>> [3] UHS-II Simplified Addendum 1.02 >>> [4] https://patchwork.kernel.org/project/linux-mmc/cover/20230721101349.12387-1-victorshihgli@xxxxxxxxx/ >>> >>> ----------------- original cover letter from v10 ----------------- >>> Summary >>> ======= >>> These patches[1] support UHS-II and fix GL9755 UHS-II compatibility. >>> >>> About UHS-II, roughly deal with the following three parts: >>> 1) A UHS-II detection and initialization: >>> - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup >>> Sequence[2]). >>> - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence >>> [2]). >>> - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include >>> Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II >>> Setting Register Setup Sequence. >>> >>> 2) Send Legacy SD command through SD-TRAN >>> - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy >>> SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1 >>> Packet Types and Format Overview[3]). >>> - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II >>> CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). >>> >>> 3) UHS-II Interrupt >>> - Except for UHS-II error interrupts, most interrupts share the original >>> interrupt registers. >>> >>> Patch structure >>> =============== >>> patch#1-#6: for core >>> patch#7-#22: for sdhci >>> patch#23: for GL9755 >>> >>> Changes in v10 (August. 18, 2023) >>> * rebased to the linux-kernel-v6.5.0-rc5 in Ulf Hansson next branch. >>> * according to the comments provided by Ulf Hansson to modify the >>> patches base on the [V9 00/23] Add support UHS-II for GL9755. >>> * Patch#2: Drop unnecessary definitions and code. >>> * Patch#3: Modify the commit message. >>> * Patch#4: Modify the commit message. >>> * Patch#5: Drop unnecessary definitions. >>> * Patch#6: Move some definitions of PatchV9[02/23] to PatchV10[06/23]. >>> Move some definitions of PatchV9[05/23] to PatchV10[06/23]. >>> Drop do_multi in the mmc_blk_rw_rq_prep(). >>> Use tmode_half_duplex to instead of uhs2_tmode0_flag. >>> Move entire control of the tmode into mmc_uhs2_prepare_cmd(). >>> * Patch#11: Move some definitions of PatchV9[05/23] to PatchV10[11/23]. >>> * Patch#18: Use tmode_half_duplex to instead of uhs2_tmode0_flag >>> in sdhci_uhs2_set_transfer_mode(). >>> * Patch#20: Move some definitions of PatchV9[05/23] to PatchV10[20/23]. >>> >>> Reference >>> ========= >>> [1] https://gitlab.com/VictorShih/linux-uhs2.git >>> [2] SD Host Controller Simplified Specification 4.20 >>> [3] UHS-II Simplified Addendum 1.02 >>> [4] https://patchwork.kernel.org/project/linux-mmc/cover/20230721101349.12387-1-victorshihgli@xxxxxxxxx/ >>> >>> ----------------- original cover letter from v9 ----------------- >>> Summary >>> ======= >>> These patches[1] support UHS-II and fix GL9755 UHS-II compatibility. >>> >>> About UHS-II, roughly deal with the following three parts: >>> 1) A UHS-II detection and initialization: >>> - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup >>> Sequence[2]). >>> - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence >>> [2]). >>> - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include >>> Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II >>> Setting Register Setup Sequence. >>> >>> 2) Send Legacy SD command through SD-TRAN >>> - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy >>> SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1 >>> Packet Types and Format Overview[3]). >>> - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II >>> CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). >>> >>> 3) UHS-II Interrupt >>> - Except for UHS-II error interrupts, most interrupts share the original >>> interrupt registers. >>> >>> Patch structure >>> =============== >>> patch#1-#6: for core >>> patch#7-#22: for sdhci >>> patch#23: for GL9755 >>> >>> Changes in v9 (July. 21, 2023) >>> * rebased to the linux-kernel-v6.5.0-rc1 in Ulf Hansson next branch. >>> * according to the comments provided by Adrian Hunter to modify the >>> patches base on the [V8 00/23] Add support UHS-II for GL9755. >>> * Patch#2: move sd_uhs2_operation definition of PatchV8[05/23] >>> to PatchV9[02/23] for avoid compilation errors. >>> move uhs2_control definition of PatchV8[05/23] >>> to PatchV9[02/23] for avoid compilation errors. >>> move mmc_host flags definition of PatchV8[05/23] >>> to PatchV9[02/23] for avoid compilation errors. >>> move mmc_host flags MMC_UHS2_SUPPORT definition of >>> PatchV8[05/23] to PatchV9[02/23] for avoid compilation errors. >>> move mmc_host flags MMC_UHS2_SD_TRAN definition of >>> PatchV8[05/23] to PatchV9[02/23] for avoid compilation errors. >>> * Patch#7: Modify the commit message. >>> * Patch#8: Modify the commit message. >>> * Patch#11: Modify annotations in sdhci_get_vdd_value(). >>> * Patch#14: Simplity the turning_on_clk in sdhci_set_ios(). >>> * Patch#18: Modify the annotations in __sdhci_uhs2_send_command(). >>> * Patch#19: Cancel export state of sdhci_set_mrq_done() function. >>> * Patch#23: Rename gl9755_pre_detect_init() to sdhci_gli_pre_detect_init(). >>> Rename gl9755_uhs2_reset_sd_tran() to >>> sdhci_gli_uhs2_reset_sd_tran(). >>> >>> Reference >>> ========= >>> [1] https://gitlab.com/VictorShih/linux-uhs2.git >>> [2] SD Host Controller Simplified Specification 4.20 >>> [3] UHS-II Simplified Addendum 1.02 >>> [4] https://patchwork.kernel.org/project/linux-mmc/cover/20230621100151.6329-1-victorshihgli@xxxxxxxxx/ >>> >>> ----------------- original cover letter from v8 ----------------- >>> Summary >>> ======= >>> These patches[1] support UHS-II and fix GL9755 UHS-II compatibility. >>> >>> About UHS-II, roughly deal with the following three parts: >>> 1) A UHS-II detection and initialization: >>> - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup >>> Sequence[2]). >>> - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence >>> [2]). >>> - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include >>> Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II >>> Setting Register Setup Sequence. >>> >>> 2) Send Legacy SD command through SD-TRAN >>> - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy >>> SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1 >>> Packet Types and Format Overview[3]). >>> - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II >>> CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). >>> >>> 3) UHS-II Interrupt >>> - Except for UHS-II error interrupts, most interrupts share the original >>> interrupt registers. >>> >>> Patch structure >>> =============== >>> patch#1-#6: for core >>> patch#7-#22: for sdhci >>> patch#23: for GL9755 >>> >>> Changes in v8 (June. 21, 2023) >>> * rebased to the linux-kernel-v6.4.0-rc6 in Ulf Hansson next branch. >>> * fix most of checkpatch warnings/errors. >>> * according to the comments provided by Adrian Hunter to modify the >>> patches base on the [V7 00/23] Add support UHS-II for GL9755. >>> * Patch#6: Add MMC_UHS2_SUPPORT to be cleared in sd_uhs2_detect(). >>> Modify return value in sd_uhs2_attach(). >>> * Patch#7: Use tabs instead of spaces. >>> * Patch#8: Modify MODULE_LICENSE from "GPL v2" to "GPL". >>> * Patch#10: Adjust the position of matching brackets. >>> * Patch#11: Adjust the position of matching brackets. >>> Add the initial value of the pwr in sdhci_uhs2_set_power(). >>> * Patch#13: Initialization be combined with declaration and realigned >>> in sdhci_calc_timeout_uhs2(). >>> Forward declare struct mmc_command in sdhci_uhs2.h. >>> * Patch#14: Add the judgment formula for MMC_TIMING_SPEED_A_HD, >>> MMC_TIMING_SPEED_B and MMC_TIMING_SPEED_B_HD in >>> __sdhci_uhs2_set_ios(). >>> Add the switch case for MMC_TIMING_SPEED_A_HD, >>> MMC_TIMING_SPEED_B and MMC_TIMING_SPEED_B_HD in >>> sdhci_get_preset_value(). >>> mmc_opt_regulator_set_ocr() to instead of >>> mmc_regulator_set_ocr() in sdhci_uhs2_set_ios(). >>> * Patch#15: usleep_range() to instead of udelay() in >>> sdhci_uhs2_interface_detect(). >>> read_poll_timeout() to instead of read_poll_timeout_atomic() >>> in sdhci_uhs2_interface_detect(). >>> Modify return value in sdhci_uhs2_do_detect_init(). >>> * Patch#16: Remove unnecessary include file. >>> read_poll_timeout() to instead of read_poll_timeout_atomic() >>> in sdhci_uhs2_enable_clk(). >>> Put the comment on the end and put the lines in descending >>> line length in sdhci_uhs2_enable_clk(). >>> Modify return value in sdhci_uhs2_enable_clk(). >>> * Patch#17: Reorder the definitions and lose the parentheses in >>> sdhci_uhs2_set_config(). >>> read_poll_timeout() to instead of read_poll_timeout_atomic() >>> in sdhci_uhs2_check_dormant(). >>> * Patch#18: Adjust the position of matching brackets in >>> sdhci_uhs2_send_command_retry(). >>> Modify CameCase definition in __sdhci_uhs2_finish_command(). >>> Modify error message in __sdhci_uhs2_finish_command(). >>> sdhci_uhs2_send_command_retry() to instead of >>> sdhci_uhs2_send_command() in sdhci_uhs2_request(). >>> Use sdhci_uhs2_mode() to simplify code in >>> sdhci_uhs2_request_atomic(). >>> Add forward declaration for sdhci_send_command(). >>> * Patch#19: Forward declare struct mmc_request in sdhci_uhs2.h. >>> Remove forward declaration of sdhci_send_command(). >>> Use mmc_dev() to simplify code in sdhci_request_done_dma(). >>> * Patch#20: Change return type to void for __sdhci_uhs2_add_host_v4(). >>> Remove unused variables in __sdhci_uhs2_add_host_v4(). >>> * Patch#22: Add config select MMC_SDHCI_UHS2 in Kconfig. >>> * Patch#23: Use sdhci_get_vdd_value() to simplify code in >>> gl9755_set_power(). >>> Use read_poll_timeout_atomic() to simplify code in >>> sdhci_wait_clock_stable(). >>> Use read_poll_timeout_atomic() to simplify code in >>> sdhci_gl9755_reset(). >>> >>> Reference >>> ========= >>> [1] https://gitlab.com/VictorShih/linux-uhs2.git >>> [2] SD Host Controller Simplified Specification 4.20 >>> [3] UHS-II Simplified Addendum 1.02 >>> [4] https://patchwork.kernel.org/project/linux-mmc/cover/20230331105546.13607-1-victor.shih@xxxxxxxxxxxxxxxxxxx/ >>> >>> ----------------- original cover letter from v7 ----------------- >>> Summary >>> ======= >>> These patches[1] support UHS-II and fix GL9755 UHS-II compatibility. >>> >>> About UHS-II, roughly deal with the following three parts: >>> 1) A UHS-II detection and initialization: >>> - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup Sequence >>> [2]). >>> - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence[2]). >>> - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include Section >>> 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II Setting Register >>> Setup Sequence. >>> >>> 2) Send Legacy SD command through SD-TRAN >>> - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy SD >>> compatibility and preserve Legacy SD infrastructures (Section 7.1.1 Packet >>> Types and Format Overview[3]). >>> - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II >>> CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). >>> >>> 3) UHS-II Interrupt >>> - Except for UHS-II error interrupts, most interrupts share the original >>> interrupt registers. >>> >>> Patch structure >>> =============== >>> patch#1-#6: for core >>> patch#7-#22: for sdhci >>> patch#23: for GL9755 >>> >>> Changes in v7 (Mar. 31, 2023) >>> * rebased to the linux-kernel-v6.3.0-rc3 in Ulf Hansson next branch. >>> * according to the guidance and overall architecture provided >>> by Ulf Hansson, Ben Chuang and Jason Lai to implement the >>> UHS-2 Core function based on the patches of the [V4,0/6] >>> Preparations to support SD UHS-II cards[5]. >>> * according to the guidance and comments provided by >>> Adrian Hunter, Ben Chuang and AKASHI Takahiro to implement >>> the UHS-2 Host function based on the patches of the >>> [RFC,v3.1,00/27] Add support UHS-II for GL9755[4]. >>> * implement the necessary function to let the UHS-2 Core/Host >>> work properly. >>> * fix most of checkpatch warnings/errors. >>> * according to the guidance and comments provided by >>> Adrian Hunter, Ben Chuang to implement the UHS-2 >>> Host function based on the patches of the >>> [V5,00/26] Add support UHS-II for GL9755[6]. >>> * according to the guidance and comments provided by >>> Ulf Hanssion, Adrian Hunter, Ben Chuang to implement the UHS-2 >>> Host function based on the patches of the >>> [V6,00/24] Add support UHS-II for GL9755[7]. >>> * The uhs2_post_attach_sd() function is no longer needed so drop >>> the V6 version of the Patch#22. >>> * Modifies the usage of the flags used by the sdhci host for >>> MMC_UHS2_INITIALIZED. >>> * Patch#1: Drop unnecessary bracket. >>> * Patch#2: Drop sd_uhs2_set_ios function. >>> Used ->uhs2_control() callback for uhs2_set_ios >>> in sd_uhs2_power_up(). >>> Used ->uhs2_control() callback for uhs2_set_ios >>> in sd_uhs2_power_off(). >>> Drop MMC_TIMING_SD_UHS2 in favor of MMC_TIMING_UHS2_SPEED_A. >>> Modify sd_uhs2_legacy_init to avoid the >>> sd_uhs2_reinit cycle issue. >>> * Patch#5: Drop unnecessary definitions. >>> * Patch#6: Drop unnecessary function. >>> Drop uhs2_state in favor of ios->timing. >>> * Patch#7: Reorder values and positions of definitions. >>> * Patch#9: Used sdhci_uhs2_mode function to simplify. >>> * Patch#11: Drop pwr variable in sdhci_uhs2_set_power function. >>> * Patch#14: Modify some descriptions. >>> Drop unnecessary function. >>> * Patch#15: Drop using uhs2_reset ops and use sdhci_uhs2_reset function >>> in the sdhci_do_detect_init function. >>> * Patch#17: Drop unnecessary function. >>> * Patch#18: Drop unnecessary whitespace changes. >>> Cancel the export state of some functions. >>> * Patch#19: Drop unnecessary function. >>> Used sdhci_uhs2_mode function to simplify. >>> Modify some descriptions. >>> Cancel the export state of some functions. >>> * Patch#20: Drop using __sdhci_uhs2_host function and use >>> __sdhci_add_host function in sdhci_uhs2_add_host function. >>> Cancel the export state of some functions. >>> * Patch#23: Drop using uhs2_post_attach_sd function. >>> >>> Reference >>> ========= >>> [1] https://gitlab.com/ben.chuang/linux-uhs2-gl9755.git >>> [2] SD Host Controller Simplified Specification 4.20 >>> [3] UHS-II Simplified Addendum 1.02 >>> [4] https://patchwork.kernel.org/project/linux-mmc/cover/20201106022726.19831-1-takahiro.akashi@xxxxxxxxxx/ >>> [5] https://patchwork.kernel.org/project/linux-mmc/cover/20220418115833.10738-1-jasonlai.genesyslogic@xxxxxxxxx/ >>> [6] https://patchwork.kernel.org/project/linux-mmc/cover/20221019110647.11076-1-victor.shih@xxxxxxxxxxxxxxxxxxx/ >>> [7] https://patchwork.kernel.org/project/linux-mmc/cover/20221213090047.3805-1-victor.shih@xxxxxxxxxxxxxxxxxxx/ >>> >>> ----------------- original cover letter from v6 ----------------- >>> Summary >>> ======= >>> These patches[1] support UHS-II and fix GL9755 UHS-II compatibility. >>> >>> About UHS-II, roughly deal with the following three parts: >>> 1) A UHS-II detection and initialization: >>> - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup Sequence >>> [2]). >>> - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence[2]). >>> - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include Section >>> 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II Setting Register >>> Setup Sequence. >>> >>> 2) Send Legacy SD command through SD-TRAN >>> - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy SD >>> compatibility and preserve Legacy SD infrastructures (Section 7.1.1 Packet >>> Types and Format Overview[3]). >>> - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II >>> CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). >>> >>> 3) UHS-II Interrupt >>> - Except for UHS-II error interrupts, most interrupts share the original >>> interrupt registers. >>> >>> Patch structure >>> =============== >>> patch#1-#6: for core >>> patch#7-#23: for sdhci >>> patch#24: for GL9755 >>> >>> Changes in v6 (Dec. 12, 2022) >>> * rebased to the linux-kernel-v6.1.0-rc8 in Ulf Hansson next branch. >>> * according to the guidance and overall architecture provided >>> by Ulf Hansson, Ben Chuang and Jason Lai to implement the >>> UHS-2 Core function based on the patches of the [V4,0/6] >>> Preparations to support SD UHS-II cards[5]. >>> * according to the guidance and comments provided by >>> Adrian Hunter, Ben Chuang and AKASHI Takahiro to implement >>> the UHS-2 Host function based on the patches of the >>> [RFC,v3.1,00/27] Add support UHS-II for GL9755[4]. >>> * implement the necessary function to let the UHS-2 Core/Host >>> work properly. >>> * fix most of checkpatch warnings/errors. >>> * according to the guidance and comments provided by >>> Adrian Hunter, Ben Chuang to implement the UHS-2 >>> Host function based on the patches of the >>> [V5,00/26] Add support UHS-II for GL9755[6]. >>> * The uhs2_post_attach_sd() has implemented in Patch#6 and >>> Patch#17 so drop the V5 version of the Patch#23. >>> * Modifies the usage of the flags used by the sdhci host for >>> MMC_UHS2_INITIALIZED. >>> * Patch#5: Drop unused definitions and functions. >>> * Patch#7: Rename definitions. >>> Use BIT() GENMASK() in some cases. >>> * Patch#8: Merge V5 version of Patch[7] and Patch[9] into >>> V6 version of Patch[8]. >>> * Patch#9: Drop unnecessary function. >>> Rename used definitions. >>> * Patch#10: Drop unnecessary function and simplify some code. >>> * Patch#11: Drop unnecessary function. >>> Add new mmc_opt_regulator_set_ocr function. >>> * Patch#13: Drop unnecessary function. >>> Use GENMASK() and FIELD_PREP() in some cases. >>> * Patch#14: Drop unnecessary function. >>> Modify return value in some function. >>> Use GENMASK() and FIELD_PREP() in some cases. >>> * Patch#15: Drop unnecessary function. >>> Rename used definitions. >>> Use GENMASK() and FIELD_GET() in some cases. >>> Wrap at 100 columns in some functions. >>> * Patch#16: Drop unnecessary function. >>> * Patch#17: Drop unnecessary function. >>> Drop the unnecessary parameter when call the DBG() >>> function. >>> Rename used definitions. >>> Cancel the export state of some functions. >>> Use GENMASK() and FIELD_PREP() in some cases. >>> * Patch#18: Drop unnecessary function. >>> Add uhs2_dev_cmd function to simplify some functions. >>> Rename used definitions. >>> Cancel the export state of some functions. >>> Use GENMASK() and FIELD_PREP() in some cases. >>> * Patch#19: Drop unnecessary function. >>> Add sdhci_uhs2_mode() in some functions. >>> Rename used definitions. >>> Cancel the export state of some functions. >>> * Patch#20: Add new complete_work_fn/thread_irq_fn variables in >>> struct sdhci_host. >>> Use complete_work_fn/thread_irq_fn variables in >>> sdhci_alloc_host()/sdhci_uhs2_add_host(). >>> Rename used definitions. >>> * Patch[24]: Rename used definitions. >>> >>> Reference >>> ========= >>> [1] https://gitlab.com/ben.chuang/linux-uhs2-gl9755.git >>> [2] SD Host Controller Simplified Specification 4.20 >>> [3] UHS-II Simplified Addendum 1.02 >>> [4] https://patchwork.kernel.org/project/linux-mmc/cover/20201106022726.19831-1-takahiro.akashi@xxxxxxxxxx/ >>> [5] https://patchwork.kernel.org/project/linux-mmc/cover/20220418115833.10738-1-jasonlai.genesyslogic@xxxxxxxxx/ >>> [6] https://patchwork.kernel.org/project/linux-mmc/cover/20221019110647.11076-1-victor.shih@xxxxxxxxxxxxxxxxxxx/ >>> >>> ----------------- original cover letter from v5 ----------------- >>> Summary >>> ======= >>> These patches[1] support UHS-II and fix GL9755 UHS-II compatibility. >>> >>> About UHS-II, roughly deal with the following three parts: >>> 1) A UHS-II detection and initialization: >>> - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup Sequence >>> [2]). >>> - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence[2]). >>> - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include Section >>> 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II Setting Register >>> Setup Sequence. >>> >>> 2) Send Legacy SD command through SD-TRAN >>> - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy SD >>> compatibility and preserve Legacy SD infrastructures (Section 7.1.1 Packet >>> Types and Format Overview[3]). >>> - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II >>> CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). >>> >>> 3) UHS-II Interrupt >>> - Except for UHS-II error interrupts, most interrupts share the original >>> interrupt registers. >>> >>> Patch structure >>> =============== >>> patch#1-#6: for core >>> patch#7-#25: for sdhci >>> patch#26: for GL9755 >>> >>> Changes in v5 (Oct. 19, 2022) >>> * rebased to the linux-kernel-v6.1-rc1 in Ulf Hansson next branch. >>> * according to the guidance and overall architecture provided >>> by Ulf Hansson, Ben Chuang and Jason Lai to implement the >>> UHS-2 Core function based on the patches of the [V4,0/6] >>> Preparations to support SD UHS-II cards[5]. >>> * according to the guidance and comments provided by >>> Adrian Hunter, Ben Chuang and AKASHI Takahiro to implement >>> the UHS-2 Host function based on the patches of the >>> [RFC,v3.1,00/27] Add support UHS-II for GL9755[4]. >>> * implement the necessary function to let the UHS-2 Core/Host >>> work properly. >>> * fix most of checkpatch warnings/errors >>> >>> Reference >>> ========= >>> [1] https://gitlab.com/ben.chuang/linux-uhs2-gl9755.git >>> [2] SD Host Controller Simplified Specification 4.20 >>> [3] UHS-II Simplified Addendum 1.02 >>> [4] https://patchwork.kernel.org/project/linux-mmc/cover/20201106022726.19831-1-takahiro.akashi@xxxxxxxxxx/ >>> [5] https://patchwork.kernel.org/project/linux-mmc/cover/20220418115833.10738-1-jasonlai.genesyslogic@xxxxxxxxx/ >>> >>> ----------------- original cover letter from v3.1 ----------------- >>> This is an interim snapshot of our next version, v4, for enabling >>> UHS-II on MMC/SD. >>> >>> It is focused on 'sdhci' side to address Adrian's comments regarding >>> "modularising" sdhci-uhs2.c. >>> The whole aim of this version is to get early feedback from Adrian (and >>> others) on this issue. Without any consensus about the code structure, >>> it would make little sense to go further ahead on sdhci side. >>> (Actually, Adrian has made no comments other than "modularising" so far.) >>> >>> I heavily reworked/refactored sdhci-uhs2.c and re-organised the patch >>> set to meet what I believe Adrian expects; no UHS-II related code in >>> Legacy (UHS-I) code or sdhci.c. >>> >>> Nevertheless, almost of all changes I made are trivial and straightforward >>> in this direction, and I believe that there is no logic changed since v3 >>> except sdhci_uhs2_irq(), as ops->irq hook, where we must deal with UHS-II >>> command sequences in addition to UHS-II errors. So I added extra handlings. >>> >>> I admit that there is plenty of room for improvements (for example, >>> handling host->flags), but again the focal point here is how sdhci-uhs2.c >>> should be built as a module. >>> >>> Please review this series (particularly Patch#8-#26 and #27) from this >>> viewpoint in the first place. >>> (Ben is working on 'host' side but there is no change on 'host' side >>> in this submission except a minor tweak.) >>> >>> Thanks, >>> -Takahiro Akashi >>> >>> ------ original cover letter from v3 ------ >>> Summary >>> ======= >>> These patches[1] support UHS-II and fix GL9755 UHS-II compatibility. >>> >>> About UHS-II, roughly deal with the following three parts: >>> 1) A UHS-II detection and initialization: >>> - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup Sequence >>> [2]). >>> - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence[2]). >>> - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include Section >>> 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II Setting Register >>> Setup Sequence. >>> >>> 2) Send Legacy SD command through SD-TRAN >>> - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy SD >>> compatibility and preserve Legacy SD infrastructures (Section 7.1.1 Packet >>> Types and Format Overview[3]). >>> - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II >>> CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). >>> >>> 3) UHS-II Interrupt >>> - Except for UHS-II error interrupts, most interrupts share the original >>> interrupt registers. >>> >>> Patch structure >>> =============== >>> patch#1-#7: for core >>> patch#8-#17: for sdhci >>> patch#18-#21: for GL9755 >>> >>> Tests >>> ===== >>> Ran 'dd' command to evaluate the performance: >>> (SanDisk UHS-II card on GL9755 controller) >>> Read Write >>> UHS-II disabled (UHS-I): 88.3MB/s 60.7MB/s >>> UHS-II enabled : 206MB/s 80MB/s >>> >>> TODO >>> ==== >>> - replace some define with BIT macro >>> >>> Reference >>> ========= >>> [1] https://gitlab.com/ben.chuang/linux-uhs2-gl9755.git >>> [2] SD Host Controller Simplified Specification 4.20 >>> [3] UHS-II Simplified Addendum 1.02 >>> >>> Changes in v3 (Jul. 10, 2020) >>> * rebased to v5.8-rc4 >>> * add copyright notice >>> * reorganize the patch set and split some commits into smaller ones >>> * separate uhs-2 headers from others >>> * correct wrong spellings >>> * fix most of checkpatch warnings/errors >>> * remove all k[cz]alloc() from the code >>> * guard sdhci-uhs2 specific code with >>> 'if (IS_ENABLED(CONFIG_MMC_SDHCI_UHS2))' >>> * make sdhci-uhs2.c as a module >>> * trivial changes, including >>> - rename back sdhci-core.c to sdhci.c >>> - allow vendor code to disable uhs2 if v4_mode == 0 >>> in __sdhci_add_host() >>> - merge uhs2_power_up() into mmc_power_up() >>> - remove flag_uhs2 from mmc_attach_sd() >>> - add function descriptions to EXPORT'ed functions >>> - other minor code optimization >>> >>> Changes in v2 (Jan. 9, 2020) >>> * rebased to v5.5-rc5 >>> >>> Ben Chuang (1): >>> mmc: sdhci-uhs2: add pre-detect_init hook >>> >>> Ulf Hansson (4): >>> mmc: core: Cleanup printing of speed mode at card insertion >>> mmc: core: Prepare to support SD UHS-II cards >>> mmc: core: Announce successful insertion of an SD UHS-II card >>> mmc: core: Extend support for mmc regulators with a vqmmc2 >>> >>> Victor Shih (17): >>> mmc: core: Add definitions for SD UHS-II cards >>> mmc: core: Add New function to re-factoring the code >>> mmc: core: Support UHS-II card control and access >>> mmc: sdhci: add UHS-II related definitions in headers >>> mmc: sdhci: add UHS-II module and add a kernel configuration >>> mmc: sdhci-uhs2: dump UHS-II registers >>> mmc: sdhci-uhs2: add reset function >>> mmc: sdhci-uhs2: add set_power() to support vdd2 >>> mmc: sdhci-uhs2: add set_timeout() >>> mmc: sdhci-uhs2: add set_ios() >>> mmc: sdhci-uhs2: add uhs2_control() to initialise the interface >>> mmc: sdhci-uhs2: add request() and others >>> mmc: sdhci-uhs2: add irq() and others >>> mmc: sdhci-uhs2: add add_host() and others to set up the driver >>> mmc: sdhci-pci: add UHS-II support framework >>> mmc: sdhci-pci-gli: enable UHS-II mode for GL9755 >>> mmc: sdhci-pci-gli: enable UHS-II mode for GL9767 >>> >>> drivers/mmc/core/Makefile | 2 +- >>> drivers/mmc/core/bus.c | 38 +- >>> drivers/mmc/core/core.c | 23 +- >>> drivers/mmc/core/core.h | 1 + >>> drivers/mmc/core/mmc_ops.c | 24 +- >>> drivers/mmc/core/mmc_ops.h | 1 + >>> drivers/mmc/core/regulator.c | 34 + >>> drivers/mmc/core/sd.c | 10 +- >>> drivers/mmc/core/sd.h | 5 + >>> drivers/mmc/core/sd_ops.c | 9 + >>> drivers/mmc/core/sd_ops.h | 13 + >>> drivers/mmc/core/sd_uhs2.c | 1326 +++++++++++++++++++++++++++++ >>> drivers/mmc/host/Kconfig | 10 + >>> drivers/mmc/host/Makefile | 1 + >>> drivers/mmc/host/sdhci-pci-core.c | 16 +- >>> drivers/mmc/host/sdhci-pci-gli.c | 446 +++++++++- >>> drivers/mmc/host/sdhci-pci.h | 3 + >>> drivers/mmc/host/sdhci-uhs2.c | 1272 +++++++++++++++++++++++++++ >>> drivers/mmc/host/sdhci-uhs2.h | 190 +++++ >>> drivers/mmc/host/sdhci.c | 281 +++--- >>> drivers/mmc/host/sdhci.h | 75 +- >>> include/linux/mmc/card.h | 36 + >>> include/linux/mmc/core.h | 17 + >>> include/linux/mmc/host.h | 80 ++ >>> include/linux/mmc/sd_uhs2.h | 240 ++++++ >>> 25 files changed, 4003 insertions(+), 150 deletions(-) >>> create mode 100644 drivers/mmc/core/sd_uhs2.c >>> create mode 100644 drivers/mmc/host/sdhci-uhs2.c >>> create mode 100644 drivers/mmc/host/sdhci-uhs2.h >>> create mode 100644 include/linux/mmc/sd_uhs2.h >>> >>> -- >>> 2.25.1 >>>
