On Thu, 22 Aug 2024 at 14:23, Ulf Hansson <ulf.hansson@xxxxxxxxxx> wrote:
>
> On Wed, 14 Aug 2024 at 09:31, Avri Altman <avri.altman@xxxxxxx> wrote:
> >
> > For open-ended read/write - just send CMD22 before issuing the command.
> > While at it, make sure that the rw command arg is properly casting the
> > lower 32 bits, as it can be larger now.
> >
> > Tested-by: Ricky WU <ricky_wu@xxxxxxxxxxx>
> > Signed-off-by: Avri Altman <avri.altman@xxxxxxx>
> > ---
> > drivers/mmc/core/block.c | 6 +++++-
> > 1 file changed, 5 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
> > index 2c9963248fcb..1129f4e1a268 100644
> > --- a/drivers/mmc/core/block.c
> > +++ b/drivers/mmc/core/block.c
> > @@ -180,6 +180,7 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
> > static void mmc_blk_hsq_req_done(struct mmc_request *mrq);
> > static int mmc_spi_err_check(struct mmc_card *card);
> > static int mmc_blk_busy_cb(void *cb_data, bool *busy);
> > +static int mmc_blk_wait_for_idle(struct mmc_queue *mq, struct mmc_host *host);
> >
> > static struct mmc_blk_data *mmc_blk_get(struct gendisk *disk)
> > {
> > @@ -1664,7 +1665,7 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
> >
> > brq->mrq.cmd = &brq->cmd;
> >
> > - brq->cmd.arg = blk_rq_pos(req);
> > + brq->cmd.arg = blk_rq_pos(req) & 0xFFFFFFFF;
> > if (!mmc_card_blockaddr(card))
> > brq->cmd.arg <<= 9;
> > brq->cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
> > @@ -1712,6 +1713,9 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
> > (do_data_tag ? (1 << 29) : 0);
> > brq->sbc.flags = MMC_RSP_R1 | MMC_CMD_AC;
> > brq->mrq.sbc = &brq->sbc;
> > + } else if (mmc_card_is_sduc(card->host)) {
> > + mmc_blk_wait_for_idle(mq, card->host);
>
> If I understand correctly, this means the async request mechanism will
> not be disabled for SDUC cards.
/s/will not/will
>
> Maybe this is the easiest way to move this forward for now, but it's
> still a bit sad if we can't keep using it for SDUC cards too.
>
> No matter what, can you please elaborate why you have chosen this approach?
>
> > + mmc_send_ext_addr(card->host, blk_rq_pos(req));
> > }
> > }
> >
> > --
> > 2.25.1
> >
>
> Kind regards
> Uffe
