SDUC memory addressing spans beyond 2TB and up to 128TB. Therefore, 38
bits are required to access the entire memory space of all sectors.
Those extra 6 bits are to be carried by CMD22 prior of sending
read/write/erase commands: CMD17, CMD18, CMD24, CMD25, CMD32, and CMD33.
CMD22 will carry the higher order 6 bits, and must precedes any of the
above commands even if it targets sector < 2TB.
No error related to address or length is indicated in CMD22 but rather
in the read/write command itself.
Signed-off-by: Avri Altman <avri.altman@xxxxxxx>
---
drivers/mmc/core/sd_ops.c | 15 +++++++++++++++
drivers/mmc/core/sd_ops.h | 1 +
include/linux/mmc/sd.h | 3 +++
3 files changed, 19 insertions(+)
diff --git a/drivers/mmc/core/sd_ops.c b/drivers/mmc/core/sd_ops.c
index 7f6963dac873..8b69129d7b61 100644
--- a/drivers/mmc/core/sd_ops.c
+++ b/drivers/mmc/core/sd_ops.c
@@ -199,6 +199,21 @@ int mmc_send_app_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
return 0;
}
+int mmc_send_ext_addr(struct mmc_host *host, sector_t addr)
+{
+ struct mmc_command cmd = {
+ .opcode = SD_ADDR_EXT,
+ .arg = (u32)((addr >> 32) & 0x3F),
+ .flags = MMC_RSP_R1 | MMC_CMD_AC,
+ };
+
+ if (!mmc_card_is_sduc(host))
+ return 0;
+
+ return mmc_wait_for_cmd(host, &cmd, 0);
+}
+EXPORT_SYMBOL_GPL(mmc_send_ext_addr);
+
static int __mmc_send_if_cond(struct mmc_host *host, u32 ocr, u8 pcie_bits,
u32 *resp)
{
diff --git a/drivers/mmc/core/sd_ops.h b/drivers/mmc/core/sd_ops.h
index 7667fc223b74..462efd43acfa 100644
--- a/drivers/mmc/core/sd_ops.h
+++ b/drivers/mmc/core/sd_ops.h
@@ -21,6 +21,7 @@ int mmc_send_relative_addr(struct mmc_host *host, unsigned int *rca);
int mmc_app_send_scr(struct mmc_card *card);
int mmc_app_sd_status(struct mmc_card *card, void *ssr);
int mmc_app_cmd(struct mmc_host *host, struct mmc_card *card);
+int mmc_send_ext_addr(struct mmc_host *host, sector_t addr);
#endif
diff --git a/include/linux/mmc/sd.h b/include/linux/mmc/sd.h
index 865cc0ca8543..af5fc70e09a2 100644
--- a/include/linux/mmc/sd.h
+++ b/include/linux/mmc/sd.h
@@ -15,6 +15,9 @@
#define SD_SEND_IF_COND 8 /* bcr [11:0] See below R7 */
#define SD_SWITCH_VOLTAGE 11 /* ac R1 */
+/* Class 2 */
+#define SD_ADDR_EXT 22 /* ac [5:0] R1 */
+
/* class 10 */
#define SD_SWITCH 6 /* adtc [31:0] See below R1 */
--
2.25.1
