Re: [PATCH v5 3/3] mmc: renesas_sdhi: Add RZ/V2H(P) compatible string

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jul 24, 2024 at 07:21:19PM +0100, Prabhakar wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> 
> The SD/MMC block on the RZ/V2H(P) ("R9A09G057") SoC is similar to that
> of the R-Car Gen3, but it has some differences:
> - HS400 is not supported.
> - It has additional SD_STATUS register to control voltage,
>   power enable and reset.
> - It supports fixed address mode.
> 
> To accommodate these differences, a SoC-specific 'renesas,sdhi-r9a09g057'
> compatible string is added.
> 
> Note for RZ/V2H(P), we are using the `of_rzg2l_compatible` OF data as it
> already handles no HS400 and fixed address mode support. Since the SDxIOVS
> and SDxPWEN pins can always be used as GPIO pins on the RZ/V2H(P) SoC, no
> driver changes are done to control the SD_STATUS register.

Okay, so you mux the pins as GPIOs and leave SD_STATUS alone. Smart
move.

> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>

For the record:

Reviewed-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux