Dear Krzysztof,
Thank you for your review.
On 2024/7/8 下午 10:25, Krzysztof Kozlowski wrote:
On 04/07/2024 08:26, Shan-Chun Hung wrote:
Add the SDHCI driver for the MA35D1 platform. It is based upon the
SDHCI interface, but requires some extra initialization.
Signed-off-by: Shan-Chun Hung <shanchun1218@xxxxxxxxx>
---
drivers/mmc/host/Kconfig | 12 ++
drivers/mmc/host/Makefile | 1 +
drivers/mmc/host/sdhci-of-ma35d1.c | 297 +++++++++++++++++++++++++++++
3 files changed, 310 insertions(+)
create mode 100644 drivers/mmc/host/sdhci-of-ma35d1.c
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index bb0d4fb0892a..aa6922ff4210 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -252,6 +252,18 @@ config MMC_SDHCI_OF_SPARX5
If unsure, say N.
+config MMC_SDHCI_OF_MA35D1
+ tristate "SDHCI OF support for the MA35D1 SDHCI controller"
+ depends on ARCH_MA35 || COMPILE_TEST
+ depends on MMC_SDHCI_PLTFM
+ help
+ This selects the MA35D1 Secure Digital Host Controller Interface.
+ The controller supports SD/MMC/SDIO devices.
+
+ If you have a controller with this interface, say Y or M here.
+
+ If unsure, say N.
+
config MMC_SDHCI_CADENCE
tristate "SDHCI support for the Cadence SD/SDIO/eMMC controller"
depends on MMC_SDHCI_PLTFM
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index f53f86d200ac..3ccffebbe59b 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -88,6 +88,7 @@ obj-$(CONFIG_MMC_SDHCI_OF_ESDHC) += sdhci-of-esdhc.o
obj-$(CONFIG_MMC_SDHCI_OF_HLWD) += sdhci-of-hlwd.o
obj-$(CONFIG_MMC_SDHCI_OF_DWCMSHC) += sdhci-of-dwcmshc.o
obj-$(CONFIG_MMC_SDHCI_OF_SPARX5) += sdhci-of-sparx5.o
+obj-$(CONFIG_MMC_SDHCI_OF_MA35D1) += sdhci-of-ma35d1.o
obj-$(CONFIG_MMC_SDHCI_BCM_KONA) += sdhci-bcm-kona.o
obj-$(CONFIG_MMC_SDHCI_IPROC) += sdhci-iproc.o
obj-$(CONFIG_MMC_SDHCI_NPCM) += sdhci-npcm.o
diff --git a/drivers/mmc/host/sdhci-of-ma35d1.c b/drivers/mmc/host/sdhci-of-ma35d1.c
new file mode 100644
index 000000000000..b5aab65b9093
--- /dev/null
+++ b/drivers/mmc/host/sdhci-of-ma35d1.c
@@ -0,0 +1,297 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2024 Nuvoton Technology Corp.
+ *
+ * Author: Shan-Chun Hung <shanchun1218@xxxxxxxxx>
+ */
+
+#include <linux/align.h>
+#include <linux/array_size.h>
+#include <linux/bits.h>
+#include <linux/build_bug.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dev_printk.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/math.h>
+#include <linux/mfd/syscon.h>
+#include <linux/minmax.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/sizes.h>
+#include <linux/types.h>
+
+#include "sdhci-pltfm.h"
+#include "sdhci.h"
+
+#define MA35_SYS_MISCFCR0 0x070
+#define MA35_SDHCI_MSHCCTL 0x508
+#define MA35_SDHCI_MBIUCTL 0x510
+
+#define MA35_SDHCI_CMD_CONFLICT_CHK BIT(0)
+#define MA35_SDHCI_INCR_MSK GENMASK(3, 0)
+#define MA35_SDHCI_INCR16 BIT(3)
+#define MA35_SDHCI_INCR8 BIT(2)
+
+struct ma35_priv {
+ struct regmap *regmap;
Drop, you don't use it.
I will remove it and use local variables instead.
+ struct reset_control *rst;
+ struct pinctrl *pinctrl;
+ struct pinctrl_state *pins_uhs;
+ struct pinctrl_state *pins_default;
+};
+
+struct ma35_restore_data {
+ u32 reg;
+ u32 width;
+};
+
...
+
+static int ma35_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct sdhci_pltfm_host *pltfm_host;
+ struct sdhci_host *host;
+ struct ma35_priv *priv;
+ int err;
+ u32 extra, ctl;
+
+ host = sdhci_pltfm_init(pdev, &sdhci_ma35_pdata, sizeof(struct ma35_priv));
+ if (IS_ERR(host))
+ return PTR_ERR(host);
+
+ /* Extra adma table cnt for cross 128M boundary handling. */
+ extra = DIV_ROUND_UP_ULL(dma_get_required_mask(dev), SZ_128M);
+ extra = min(extra, SDHCI_MAX_SEGS);
+
+ host->adma_table_cnt += extra;
+ pltfm_host = sdhci_priv(host);
+ priv = sdhci_pltfm_priv(pltfm_host);
+
+ pltfm_host->clk = devm_clk_get_optional_enabled(dev, NULL);
+ if (IS_ERR(pltfm_host->clk)) {
+ err = PTR_ERR(pltfm_host->clk);
+ dev_err_probe(dev, err, "failed to get clk\n");
Syntax is err = dev_err_probe()
I will fix it.
+ goto err_sdhci;
+ }
+
+ err = mmc_of_parse(host->mmc);
+ if (err)
+ goto err_sdhci;
+
+ priv->rst = devm_reset_control_get_exclusive(dev, NULL);
+ if (IS_ERR(priv->rst)) {
+ err = PTR_ERR(priv->rst);
+ dev_err_probe(dev, err, "failed to get reset control\n");
err = dev_err_probe
... so all your previous versions were leaking memory. Double check your
error paths.
I will fix it and make sure to double check the error paths.
+ goto err_sdhci;
+ }
+
+ sdhci_get_of_property(pdev);
+
Best regards,
Krzysztof
Best Regards,
Shan-Chun
