The I.MX SDHCI driver assumes that the frequency of the 'per' clock
can be obtained even on disabled clocks, which is not always the case.
According to 'clk_get_rate' documentation, it is only valid
once the clock source has been enabled.
Signed-off-by: Ciprian Costea <ciprianmarian.costea@xxxxxxxxxxx>
---
drivers/mmc/host/sdhci-esdhc-imx.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 21d984a77be8..8f0bc6dca2b0 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -1709,7 +1709,6 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
}
pltfm_host->clk = imx_data->clk_per;
- pltfm_host->clock = clk_get_rate(pltfm_host->clk);
err = clk_prepare_enable(imx_data->clk_per);
if (err)
goto free_sdhci;
@@ -1720,6 +1719,13 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
if (err)
goto disable_ipg_clk;
+ pltfm_host->clock = clk_get_rate(pltfm_host->clk);
+ if (!pltfm_host->clock) {
+ dev_err(mmc_dev(host->mmc), "could not get clk rate\n");
+ err = -EINVAL;
+ goto disable_ahb_clk;
+ }
+
imx_data->pinctrl = devm_pinctrl_get(&pdev->dev);
if (IS_ERR(imx_data->pinctrl))
dev_warn(mmc_dev(host->mmc), "could not get pinctrl\n");
--
2.45.2
