Re: [PATCH V17 00/22] Add support UHS-II for GL9755 and GL9767

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi, Ulf

Excuse me, please help review this series of patches.
If you already have a closer look at a paragraph in the series,
could you let me know your comments first, let me check it first.

I look forward to your reply.

Thanks, Victor Shih

On Fri, Jul 5, 2024 at 6:25 PM Victor Shih <victorshihgli@xxxxxxxxx> wrote:
>
> On Sat, Jun 29, 2024 at 1:17 AM Adrian Hunter <adrian.hunter@xxxxxxxxx> wrote:
> >
> > On 20/06/24 13:44, Victor Shih wrote:
> > > From: Victor Shih <victor.shih@xxxxxxxxxxxxxxxxxxx>
> > >
> > > Summary
> > > =======
> > > These patches[1] support UHS-II and fix GL9755 and GL9767
> > > UHS-II compatibility.
> > >
> > > About UHS-II, roughly deal with the following three parts:
> > > 1) A UHS-II detection and initialization:
> > > - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup
> > >   Sequence[2]).
> > > - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence
> > >   [2]).
> > > - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include
> > >   Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II
> > >   Setting Register Setup Sequence.
> > >
> > > 2) Send Legacy SD command through SD-TRAN
> > > - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy
> > >   SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1
> > >   Packet Types and Format Overview[3]).
> > > - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II
> > >   CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]).
> > >
> > > 3) UHS-II Interrupt
> > > - Except for UHS-II error interrupts, most interrupts share the original
> > >   interrupt registers.
> > >
> > > Patch structure
> > > ===============
> > > patch#1-#7:  for core
> > > patch#8-#20: for sdhci
> > > patch#21:    for GL9755
> > > patch#22:    for GL9767
> > >
> > > Changes in v17 (June. 20, 2024)
> > > * Rebase on latest mmc/next.
> > > * Drop patch#8 of uhs2 patches series v16.
> > > * Patch#11: Move the sdhci_uhs2_reset_cmd_data() to the other patch
> > >             it was used for the first time.
> > > * Patch#12: Export sdhci_uhs2_set_power() function.
> > > * Patch#16: Add new parameter to __sdhci_finish_data_common().
> > > * Patch#17: Add sdhci_uhs2_reset_cmd_data() and sdhci_uhs2_needs_reset() to
> > >             resolve the data error or cmd error.
> > > * Patch#21: Rname gl9755_overcurrent_event_enable() to
> > >             sdhci_gli_overcurrent_event_enable().
> > > * Patch#22: Use mmc_card_uhs2() to simplify the code in the
> > >             sdhci_gl9767_reset().
> > >             Use mmc_card_uhs2() to simplify the code in the
> > >             sdhci_gl9767_set_power().
> > >             Add sdhci_gli_overcurrent_event_enable() to
> > >             sdhci_gl9767_set_power().
> >
> > The changes in V17 look fine.
> >
> > I have no further comments for SDHCI at this stage.
> >
> > AFAICT because SD-TRAN is used, CMD12 is OK to abort
> > data transfers if necessary.
> >
> > Can you confirm that the current patchset is working
> > on your platform?
>
> Hi, Adrian
>
> Yes, please refer to the test data below.
>
> Tests
> =====
> Ran 'dd' command to evaluate the performance:
> (SanDisk UHS-II card on GL9755 controller)
>                              Read    Write
> UHS-II disabled (UHS-I): 84.8MB/s 50.0MB/s
> UHS-II enabled         :  199MB/s 76.9MB/s
>
> (SanDisk UHS-II card on GL9767 controller)
>                              Read    Write
> UHS-II disabled (UHS-I): 84.6MB/s 49.6MB/s
> UHS-II enabled         :  155MB/s 67.4MB/s
>
> Thanks, Victor Shih
>
> >
> > In other respects you probably need to get some feedback
> > from Ulf.
> >
> > >
> > > Reference
> > > =========
> > > [1] https://gitlab.com/VictorShih/linux-uhs2.git
> > > [2] SD Host Controller Simplified Specification 4.20
> > > [3] UHS-II Simplified Addendum 1.02
> > > [4] https://patchwork.kernel.org/project/linux-mmc/cover/20240522110909.10060-1-victorshihgli@xxxxxxxxx/
> > >
> > > ----------------- original cover letter from v16 -----------------
> > > Summary
> > > =======
> > > These patches[1] support UHS-II and fix GL9755 and GL9767
> > > UHS-II compatibility.
> > >
> > > About UHS-II, roughly deal with the following three parts:
> > > 1) A UHS-II detection and initialization:
> > > - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup
> > >   Sequence[2]).
> > > - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence
> > >   [2]).
> > > - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include
> > >   Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II
> > >   Setting Register Setup Sequence.
> > >
> > > 2) Send Legacy SD command through SD-TRAN
> > > - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy
> > >   SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1
> > >   Packet Types and Format Overview[3]).
> > > - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II
> > >   CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]).
> > >
> > > 3) UHS-II Interrupt
> > > - Except for UHS-II error interrupts, most interrupts share the original
> > >   interrupt registers.
> > >
> > > Patch structure
> > > ===============
> > > patch#1-#8:  for core
> > > patch#9-#21: for sdhci
> > > patch#22:    for GL9755
> > > patch#23:    for GL9767
> > >
> > > Changes in v16 (May. 22, 2024)
> > > * rebased to the linux-kernel-v6.9.0-rc2 in Ulf Hansson next branch.
> > > * according to the comments provided by Adrian Hunter to modify the
> > >   patches base on the [V14 00/21] Add support UHS-II for GL9755.
> > > * Patch#8: Separate the Error Recovery mechanism from patch#7 to patch#8.
> > > * Patch#16: Remove irrelevant definition in the sdhci_calc_timeout_uhs2().
> > >
> > > Reference
> > > =========
> > > [1] https://gitlab.com/VictorShih/linux-uhs2.git
> > > [2] SD Host Controller Simplified Specification 4.20
> > > [3] UHS-II Simplified Addendum 1.02
> > > [4] https://patchwork.kernel.org/project/linux-mmc/cover/20240123062827.8525-1-victorshihgli@xxxxxxxxx/
> > >
> > > ----------------- original cover letter from v15 -----------------
> > > Summary
> > > =======
> > > These patches[1] support UHS-II and fix GL9755 and GL9767
> > > UHS-II compatibility.
> > >
> > > About UHS-II, roughly deal with the following three parts:
> > > 1) A UHS-II detection and initialization:
> > > - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup
> > >   Sequence[2]).
> > > - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence
> > >   [2]).
> > > - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include
> > >   Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II
> > >   Setting Register Setup Sequence.
> > >
> > > 2) Send Legacy SD command through SD-TRAN
> > > - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy
> > >   SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1
> > >   Packet Types and Format Overview[3]).
> > > - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II
> > >   CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]).
> > >
> > > 3) UHS-II Interrupt
> > > - Except for UHS-II error interrupts, most interrupts share the original
> > >   interrupt registers.
> > >
> > > Patch structure
> > > ===============
> > > patch#1-#7:  for core
> > > patch#8-#20: for sdhci
> > > patch#21:    for GL9755
> > > patch#22:    for GL9767
> > >
> > > Changes in v15 (April. 22, 2024)
> > > * rebased to the linux-kernel-v6.9.0-rc2 in Ulf Hansson next branch.
> > > * according to the comments provided by Adrian Hunter to modify the
> > >   patches base on the [V14 00/21] Add support UHS-II for GL9755.
> > > * Patch#07: Move struct uhs2_command uhs2_cmd to struct mmc_request and
> > >             modify whatever other changers to make it work.
> > >             Refer the SD Host Controller Standard Specification
> > >             Section 3.10 to add Error Recovery mechanism to recover
> > >             the command error.
> > > * Patch#11: Refer the SD Host Controller Standard Specification
> > >             Section 3.10 to add reset command data mechanism.
> > > * Patch#15: Resolve merge conflicts and reduce unnecessary line breaks.
> > > * Patch#16: Adjust the parameters used in the __sdhci_uhs2_finish_command()
> > >             to match changes in the Patch#7.
> > > * Patch#21: Adjust gl9755_vendor_init() to the correct function.
> > > * Patch#22: Add gl9767 to support uhs2 function.
> > >
> > > Reference
> > > =========
> > > [1] https://gitlab.com/VictorShih/linux-uhs2.git
> > > [2] SD Host Controller Simplified Specification 4.20
> > > [3] UHS-II Simplified Addendum 1.02
> > > [4] https://patchwork.kernel.org/project/linux-mmc/cover/20240123062827.8525-1-victorshihgli@xxxxxxxxx/
> > >
> > > ----------------- original cover letter from v14 -----------------
> > > Summary
> > > =======
> > > These patches[1] support UHS-II and fix GL9755 UHS-II compatibility.
> > >
> > > About UHS-II, roughly deal with the following three parts:
> > > 1) A UHS-II detection and initialization:
> > > - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup
> > >   Sequence[2]).
> > > - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence
> > >   [2]).
> > > - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include
> > >   Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II
> > >   Setting Register Setup Sequence.
> > >
> > > 2) Send Legacy SD command through SD-TRAN
> > > - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy
> > >   SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1
> > >   Packet Types and Format Overview[3]).
> > > - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II
> > >   CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]).
> > >
> > > 3) UHS-II Interrupt
> > > - Except for UHS-II error interrupts, most interrupts share the original
> > >   interrupt registers.
> > >
> > > Patch structure
> > > ===============
> > > patch#1-#7:  for core
> > > patch#8-#20: for sdhci
> > > patch#21:    for GL9755
> > >
> > > Changes in v14 (January. 23, 2024)
> > > * rebased to the linux-kernel-v6.7.0-rc4 in Ulf Hansson next branch.
> > > * according to the comments provided by Adrian Hunter to modify the
> > >   patches base on the [V13 00/21] Add support UHS-II for GL9755.
> > > * Patch#03: Move mmc_card_uhs2() to include/linux/mmc/host.h, so that
> > >             mmc_card_uhs2() can be available for host drivers.
> > > * Patch#10: Use mmc_card_uhs2() to stead sdhci_uhs2_mode() in the
> > >             sdhci_uhs2_dump_regs().
> > > * Patch#11: Since mmc_card_uhs2() is the same as sdhci_uhs2_mode(), so
> > >             drop sdhci_uhs2_mode() and use mmc_card_uhs2() instead of
> > >             sdhci_uhs2_mode().
> > > * Patch#13: Use mmc_card_uhs2() to stead sdhci_uhs2_mode() in the
> > >             sdhci_uhs2_set_timeout().
> > > * Patch#14: Use mmc_card_uhs2() to stead sdhci_uhs2_mode() in the
> > >             sdhci_uhs2_set_ios().
> > > * Patch#16: Use mmc_card_uhs2() to stead sdhci_uhs2_mode() in the
> > >             sdhci_uhs2_request().
> > > * Patch#17: Use mmc_card_uhs2() to stead sdhci_uhs2_mode() in the
> > >             sdhci_uhs2_complete_work(), sdhci_uhs2_irq() and
> > >             sdhci_uhs2_thread_irq().
> > > * Patch#18: Use mmc_card_uhs2() to stead sdhci_uhs2_mode() in the
> > >             __sdhci_uhs2_remove_host().
> > >
> > > Reference
> > > =========
> > > [1] https://gitlab.com/VictorShih/linux-uhs2.git
> > > [2] SD Host Controller Simplified Specification 4.20
> > > [3] UHS-II Simplified Addendum 1.02
> > > [4] https://patchwork.kernel.org/project/linux-mmc/cover/20230915094351.11120-1-victorshihgli@xxxxxxxxx/
> > >
> > > ----------------- original cover letter from v13 -----------------
> > > Summary
> > > =======
> > > These patches[1] support UHS-II and fix GL9755 UHS-II compatibility.
> > >
> > > About UHS-II, roughly deal with the following three parts:
> > > 1) A UHS-II detection and initialization:
> > > - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup
> > >   Sequence[2]).
> > > - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence
> > >   [2]).
> > > - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include
> > >   Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II
> > >   Setting Register Setup Sequence.
> > >
> > > 2) Send Legacy SD command through SD-TRAN
> > > - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy
> > >   SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1
> > >   Packet Types and Format Overview[3]).
> > > - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II
> > >   CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]).
> > >
> > > 3) UHS-II Interrupt
> > > - Except for UHS-II error interrupts, most interrupts share the original
> > >   interrupt registers.
> > >
> > > Patch structure
> > > ===============
> > > patch#1-#7:  for core
> > > patch#8-#20: for sdhci
> > > patch#21:    for GL9755
> > >
> > > Changes in v13 (November. 17, 2023)
> > > * rebased to the linux-kernel-v6.7.0-rc1 in Ulf Hansson next branch.
> > > * according to the comments provided by Adrian Hunter to modify the
> > >   patches base on the [V12 00/23] Add support UHS-II for GL9755.
> > > * according to the comments provided by Ulf Hansson to modify the
> > >   patches base on the [V12 00/23] Add support UHS-II for GL9755.
> > > * Add new patch#6 to re-factoring the code.
> > > * Patch#7: Separate __mmc_go_idle() into one patch for re-factorring the code.
> > >            Move mmc_decode_scr declaration to sd.h.
> > >            Ues uhs2_sd_tran to stead MMC_UHS2_SD_TRAN.
> > >            Drop unnecessary comment.
> > > * Patch#11: Use ios timing to stead MMC_UHS2_SUPPORT for indicate the UHS2 mode.
> > > * Patch#12: Drop use vmmc2.
> > >             Modify comment message.
> > > * Patch#13: Modify comment message.
> > > * Patch#14: Add judgment condition for power mode in the __sdhci_uhs2_set_ios().
> > >             Modify comment message.
> > > * Patch#15: Merge Patch#15, Patch#16 and Patch#17 of v12 version into Patch#15 in v13 version.
> > >             Use definitions to simplify code.
> > >             Modify comment message.
> > > * Patch#16: Re-order function to avoid declaration.
> > >             Remove unnecessary function.
> > > * Patch#17: Re-order function to avoid declaration.
> > >             Remove unnecessary definitions.
> > > * Patch#18: Re-order function to avoid declaration.
> > >             Use vqmmc2 to stead vmmc2.
> > > * Patch#21: Ues uhs2_sd_tran to stead MMC_UHS2_SD_TRAN.
> > >
> > > Reference
> > > =========
> > > [1] https://gitlab.com/VictorShih/linux-uhs2.git
> > > [2] SD Host Controller Simplified Specification 4.20
> > > [3] UHS-II Simplified Addendum 1.02
> > > [4] https://patchwork.kernel.org/project/linux-mmc/cover/20230915094351.11120-1-victorshihgli@xxxxxxxxx/
> > >
> > > ----------------- original cover letter from v12 -----------------
> > > Summary
> > > =======
> > > These patches[1] support UHS-II and fix GL9755 UHS-II compatibility.
> > >
> > > About UHS-II, roughly deal with the following three parts:
> > > 1) A UHS-II detection and initialization:
> > > - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup
> > >   Sequence[2]).
> > > - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence
> > >   [2]).
> > > - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include
> > >   Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II
> > >   Setting Register Setup Sequence.
> > >
> > > 2) Send Legacy SD command through SD-TRAN
> > > - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy
> > >   SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1
> > >   Packet Types and Format Overview[3]).
> > > - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II
> > >   CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]).
> > >
> > > 3) UHS-II Interrupt
> > > - Except for UHS-II error interrupts, most interrupts share the original
> > >   interrupt registers.
> > >
> > > Patch structure
> > > ===============
> > > patch#1-#6:  for core
> > > patch#7-#22: for sdhci
> > > patch#23:    for GL9755
> > >
> > > Changes in v12 (September. 15, 2023)
> > > * rebased to the linux-kernel-v6.6.0-rc1 in Ulf Hansson next branch.
> > > * according to the comments provided by Adrian Hunter to modify the
> > >   patches base on the [V11 00/23] Add support UHS-II for GL9755.
> > > * according to the comments provided by Ulf Hansson to modify the
> > >   patches base on the [V11 00/23] Add support UHS-II for GL9755.
> > > * Patch#5: Remove unused max_current_180_vdd2.
> > > * Patch#6: Use mmc_op_multi() to check DCMD which supports multi
> > >            read/write in mmc_uhs2_prepare_cmd().
> > >
> > > Reference
> > > =========
> > > [1] https://gitlab.com/VictorShih/linux-uhs2.git
> > > [2] SD Host Controller Simplified Specification 4.20
> > > [3] UHS-II Simplified Addendum 1.02
> > > [4] https://patchwork.kernel.org/project/linux-mmc/cover/20230908095330.12075-1-victorshihgli@xxxxxxxxx/
> > >
> > > ----------------- original cover letter from v11 -----------------
> > > Summary
> > > =======
> > > These patches[1] support UHS-II and fix GL9755 UHS-II compatibility.
> > >
> > > About UHS-II, roughly deal with the following three parts:
> > > 1) A UHS-II detection and initialization:
> > > - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup
> > >   Sequence[2]).
> > > - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence
> > >   [2]).
> > > - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include
> > >   Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II
> > >   Setting Register Setup Sequence.
> > >
> > > 2) Send Legacy SD command through SD-TRAN
> > > - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy
> > >   SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1
> > >   Packet Types and Format Overview[3]).
> > > - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II
> > >   CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]).
> > >
> > > 3) UHS-II Interrupt
> > > - Except for UHS-II error interrupts, most interrupts share the original
> > >   interrupt registers.
> > >
> > > Patch structure
> > > ===============
> > > patch#1-#6:  for core
> > > patch#7-#22: for sdhci
> > > patch#23:    for GL9755
> > >
> > > Changes in v11 (September. 08, 2023)
> > > * rebased to the linux-kernel-v6.5.0-rc5 in Ulf Hansson next branch.
> > > * according to the comments provided by Adrian Hunter to modify the
> > >   patches base on the [V10 00/23] Add support UHS-II for GL9755.
> > > * Patch#18: Drop the check mmc_card_uhs2_hd_mode(host->mmc)
> > >             in sdhci_uhs2_set_transfer_mode().
> > > * Patch#20: Remove unused ocr_avail_uhs2.
> > >
> > > Reference
> > > =========
> > > [1] https://gitlab.com/VictorShih/linux-uhs2.git
> > > [2] SD Host Controller Simplified Specification 4.20
> > > [3] UHS-II Simplified Addendum 1.02
> > > [4] https://patchwork.kernel.org/project/linux-mmc/cover/20230721101349.12387-1-victorshihgli@xxxxxxxxx/
> > >
> > > ----------------- original cover letter from v10 -----------------
> > > Summary
> > > =======
> > > These patches[1] support UHS-II and fix GL9755 UHS-II compatibility.
> > >
> > > About UHS-II, roughly deal with the following three parts:
> > > 1) A UHS-II detection and initialization:
> > > - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup
> > >   Sequence[2]).
> > > - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence
> > >   [2]).
> > > - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include
> > >   Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II
> > >   Setting Register Setup Sequence.
> > >
> > > 2) Send Legacy SD command through SD-TRAN
> > > - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy
> > >   SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1
> > >   Packet Types and Format Overview[3]).
> > > - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II
> > >   CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]).
> > >
> > > 3) UHS-II Interrupt
> > > - Except for UHS-II error interrupts, most interrupts share the original
> > >   interrupt registers.
> > >
> > > Patch structure
> > > ===============
> > > patch#1-#6:  for core
> > > patch#7-#22: for sdhci
> > > patch#23:    for GL9755
> > >
> > > Changes in v10 (August. 18, 2023)
> > > * rebased to the linux-kernel-v6.5.0-rc5 in Ulf Hansson next branch.
> > > * according to the comments provided by Ulf Hansson to modify the
> > >   patches base on the [V9 00/23] Add support UHS-II for GL9755.
> > > * Patch#2: Drop unnecessary definitions and code.
> > > * Patch#3: Modify the commit message.
> > > * Patch#4: Modify the commit message.
> > > * Patch#5: Drop unnecessary definitions.
> > > * Patch#6: Move some definitions of PatchV9[02/23] to PatchV10[06/23].
> > >            Move some definitions of PatchV9[05/23] to PatchV10[06/23].
> > >            Drop do_multi in the mmc_blk_rw_rq_prep().
> > >            Use tmode_half_duplex to instead of uhs2_tmode0_flag.
> > >            Move entire control of the tmode into mmc_uhs2_prepare_cmd().
> > > * Patch#11: Move some definitions of PatchV9[05/23] to PatchV10[11/23].
> > > * Patch#18: Use tmode_half_duplex to instead of uhs2_tmode0_flag
> > >             in sdhci_uhs2_set_transfer_mode().
> > > * Patch#20: Move some definitions of PatchV9[05/23] to PatchV10[20/23].
> > >
> > > Reference
> > > =========
> > > [1] https://gitlab.com/VictorShih/linux-uhs2.git
> > > [2] SD Host Controller Simplified Specification 4.20
> > > [3] UHS-II Simplified Addendum 1.02
> > > [4] https://patchwork.kernel.org/project/linux-mmc/cover/20230721101349.12387-1-victorshihgli@xxxxxxxxx/
> > >
> > > ----------------- original cover letter from v9 -----------------
> > > Summary
> > > =======
> > > These patches[1] support UHS-II and fix GL9755 UHS-II compatibility.
> > >
> > > About UHS-II, roughly deal with the following three parts:
> > > 1) A UHS-II detection and initialization:
> > > - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup
> > >   Sequence[2]).
> > > - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence
> > >   [2]).
> > > - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include
> > >   Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II
> > >   Setting Register Setup Sequence.
> > >
> > > 2) Send Legacy SD command through SD-TRAN
> > > - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy
> > >   SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1
> > >   Packet Types and Format Overview[3]).
> > > - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II
> > >   CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]).
> > >
> > > 3) UHS-II Interrupt
> > > - Except for UHS-II error interrupts, most interrupts share the original
> > >   interrupt registers.
> > >
> > > Patch structure
> > > ===============
> > > patch#1-#6:  for core
> > > patch#7-#22: for sdhci
> > > patch#23:    for GL9755
> > >
> > > Changes in v9 (July. 21, 2023)
> > > * rebased to the linux-kernel-v6.5.0-rc1 in Ulf Hansson next branch.
> > > * according to the comments provided by Adrian Hunter to modify the
> > >   patches base on the [V8 00/23] Add support UHS-II for GL9755.
> > > * Patch#2: move sd_uhs2_operation definition of PatchV8[05/23]
> > >            to PatchV9[02/23] for avoid compilation errors.
> > >            move uhs2_control definition of PatchV8[05/23]
> > >            to PatchV9[02/23] for avoid compilation errors.
> > >            move mmc_host flags definition of PatchV8[05/23]
> > >            to PatchV9[02/23] for avoid compilation errors.
> > >            move mmc_host flags MMC_UHS2_SUPPORT definition of
> > >            PatchV8[05/23] to PatchV9[02/23] for avoid compilation errors.
> > >            move mmc_host flags MMC_UHS2_SD_TRAN definition of
> > >            PatchV8[05/23] to PatchV9[02/23] for avoid compilation errors.
> > > * Patch#7: Modify the commit message.
> > > * Patch#8: Modify the commit message.
> > > * Patch#11: Modify annotations in sdhci_get_vdd_value().
> > > * Patch#14: Simplity the turning_on_clk in sdhci_set_ios().
> > > * Patch#18: Modify the annotations in __sdhci_uhs2_send_command().
> > > * Patch#19: Cancel export state of sdhci_set_mrq_done() function.
> > > * Patch#23: Rename gl9755_pre_detect_init() to sdhci_gli_pre_detect_init().
> > >             Rename gl9755_uhs2_reset_sd_tran() to
> > >             sdhci_gli_uhs2_reset_sd_tran().
> > >
> > > Reference
> > > =========
> > > [1] https://gitlab.com/VictorShih/linux-uhs2.git
> > > [2] SD Host Controller Simplified Specification 4.20
> > > [3] UHS-II Simplified Addendum 1.02
> > > [4] https://patchwork.kernel.org/project/linux-mmc/cover/20230621100151.6329-1-victorshihgli@xxxxxxxxx/
> > >
> > > ----------------- original cover letter from v8 -----------------
> > > Summary
> > > =======
> > > These patches[1] support UHS-II and fix GL9755 UHS-II compatibility.
> > >
> > > About UHS-II, roughly deal with the following three parts:
> > > 1) A UHS-II detection and initialization:
> > > - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup
> > >   Sequence[2]).
> > > - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence
> > >   [2]).
> > > - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include
> > >   Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II
> > >   Setting Register Setup Sequence.
> > >
> > > 2) Send Legacy SD command through SD-TRAN
> > > - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy
> > >   SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1
> > >   Packet Types and Format Overview[3]).
> > > - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II
> > >   CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]).
> > >
> > > 3) UHS-II Interrupt
> > > - Except for UHS-II error interrupts, most interrupts share the original
> > >   interrupt registers.
> > >
> > > Patch structure
> > > ===============
> > > patch#1-#6:  for core
> > > patch#7-#22: for sdhci
> > > patch#23:    for GL9755
> > >
> > > Changes in v8 (June. 21, 2023)
> > > * rebased to the linux-kernel-v6.4.0-rc6 in Ulf Hansson next branch.
> > > * fix most of checkpatch warnings/errors.
> > > * according to the comments provided by Adrian Hunter to modify the
> > >   patches base on the [V7 00/23] Add support UHS-II for GL9755.
> > > * Patch#6: Add MMC_UHS2_SUPPORT to be cleared in sd_uhs2_detect().
> > >            Modify return value in sd_uhs2_attach().
> > > * Patch#7: Use tabs instead of spaces.
> > > * Patch#8: Modify MODULE_LICENSE from "GPL v2" to "GPL".
> > > * Patch#10: Adjust the position of matching brackets.
> > > * Patch#11: Adjust the position of matching brackets.
> > >             Add the initial value of the pwr in sdhci_uhs2_set_power().
> > > * Patch#13: Initialization be combined with declaration and realigned
> > >             in sdhci_calc_timeout_uhs2().
> > >             Forward declare struct mmc_command in sdhci_uhs2.h.
> > > * Patch#14: Add the judgment formula for MMC_TIMING_SPEED_A_HD,
> > >             MMC_TIMING_SPEED_B and MMC_TIMING_SPEED_B_HD in
> > >             __sdhci_uhs2_set_ios().
> > >             Add the switch case for MMC_TIMING_SPEED_A_HD,
> > >             MMC_TIMING_SPEED_B and MMC_TIMING_SPEED_B_HD in
> > >             sdhci_get_preset_value().
> > >             mmc_opt_regulator_set_ocr() to instead of
> > >             mmc_regulator_set_ocr() in sdhci_uhs2_set_ios().
> > > * Patch#15: usleep_range() to instead of udelay() in
> > >             sdhci_uhs2_interface_detect().
> > >             read_poll_timeout() to instead of read_poll_timeout_atomic()
> > >             in sdhci_uhs2_interface_detect().
> > >             Modify return value in sdhci_uhs2_do_detect_init().
> > > * Patch#16: Remove unnecessary include file.
> > >             read_poll_timeout() to instead of read_poll_timeout_atomic()
> > >             in sdhci_uhs2_enable_clk().
> > >             Put the comment on the end and put the lines in descending
> > >             line length in sdhci_uhs2_enable_clk().
> > >             Modify return value in sdhci_uhs2_enable_clk().
> > > * Patch#17: Reorder the definitions and lose the parentheses in
> > >             sdhci_uhs2_set_config().
> > >             read_poll_timeout() to instead of read_poll_timeout_atomic()
> > >             in sdhci_uhs2_check_dormant().
> > > * Patch#18: Adjust the position of matching brackets in
> > >             sdhci_uhs2_send_command_retry().
> > >             Modify CameCase definition in __sdhci_uhs2_finish_command().
> > >             Modify error message in __sdhci_uhs2_finish_command().
> > >             sdhci_uhs2_send_command_retry() to instead of
> > >             sdhci_uhs2_send_command() in sdhci_uhs2_request().
> > >             Use sdhci_uhs2_mode() to simplify code in
> > >             sdhci_uhs2_request_atomic().
> > >             Add forward declaration for sdhci_send_command().
> > > * Patch#19: Forward declare struct mmc_request in sdhci_uhs2.h.
> > >             Remove forward declaration of sdhci_send_command().
> > >             Use mmc_dev() to simplify code in sdhci_request_done_dma().
> > > * Patch#20: Change return type to void for __sdhci_uhs2_add_host_v4().
> > >             Remove unused variables in __sdhci_uhs2_add_host_v4().
> > > * Patch#22: Add config select MMC_SDHCI_UHS2 in Kconfig.
> > > * Patch#23: Use sdhci_get_vdd_value() to simplify code in
> > >             gl9755_set_power().
> > >             Use read_poll_timeout_atomic() to simplify code in
> > >             sdhci_wait_clock_stable().
> > >             Use read_poll_timeout_atomic() to simplify code in
> > >             sdhci_gl9755_reset().
> > >
> > > Reference
> > > =========
> > > [1] https://gitlab.com/VictorShih/linux-uhs2.git
> > > [2] SD Host Controller Simplified Specification 4.20
> > > [3] UHS-II Simplified Addendum 1.02
> > > [4] https://patchwork.kernel.org/project/linux-mmc/cover/20230331105546.13607-1-victor.shih@xxxxxxxxxxxxxxxxxxx/
> > >
> > > ----------------- original cover letter from v7 -----------------
> > > Summary
> > > =======
> > > These patches[1] support UHS-II and fix GL9755 UHS-II compatibility.
> > >
> > > About UHS-II, roughly deal with the following three parts:
> > > 1) A UHS-II detection and initialization:
> > > - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup Sequence
> > >   [2]).
> > > - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence[2]).
> > > - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include Section
> > >   3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II Setting Register
> > >   Setup Sequence.
> > >
> > > 2) Send Legacy SD command through SD-TRAN
> > > - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy SD
> > >   compatibility and preserve Legacy SD infrastructures (Section 7.1.1 Packet
> > >   Types and Format Overview[3]).
> > > - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II
> > >   CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]).
> > >
> > > 3) UHS-II Interrupt
> > > - Except for UHS-II error interrupts, most interrupts share the original
> > >   interrupt registers.
> > >
> > > Patch structure
> > > ===============
> > > patch#1-#6:  for core
> > > patch#7-#22: for sdhci
> > > patch#23:    for GL9755
> > >
> > > Changes in v7 (Mar. 31, 2023)
> > > * rebased to the linux-kernel-v6.3.0-rc3 in Ulf Hansson next branch.
> > > * according to the guidance and overall architecture provided
> > >   by Ulf Hansson, Ben Chuang and Jason Lai to implement the
> > >   UHS-2 Core function based on the patches of the [V4,0/6]
> > >   Preparations to support SD UHS-II cards[5].
> > > * according to the guidance and comments provided by
> > >   Adrian Hunter, Ben Chuang and AKASHI Takahiro to implement
> > >   the UHS-2 Host function based on the patches of the
> > >   [RFC,v3.1,00/27] Add support UHS-II for GL9755[4].
> > > * implement the necessary function to let the UHS-2 Core/Host
> > >   work properly.
> > > * fix most of checkpatch warnings/errors.
> > > * according to the guidance and comments provided by
> > >   Adrian Hunter, Ben Chuang to implement the UHS-2
> > >   Host function based on the patches of the
> > >   [V5,00/26] Add support UHS-II for GL9755[6].
> > > * according to the guidance and comments provided by
> > >   Ulf Hanssion, Adrian Hunter, Ben Chuang to implement the UHS-2
> > >   Host function based on the patches of the
> > >   [V6,00/24] Add support UHS-II for GL9755[7].
> > > * The uhs2_post_attach_sd() function is no longer needed so drop
> > >   the V6 version of the Patch#22.
> > > * Modifies the usage of the flags used by the sdhci host for
> > >   MMC_UHS2_INITIALIZED.
> > > * Patch#1: Drop unnecessary bracket.
> > > * Patch#2: Drop sd_uhs2_set_ios function.
> > >            Used ->uhs2_control() callback for uhs2_set_ios
> > >            in sd_uhs2_power_up().
> > >            Used ->uhs2_control() callback for uhs2_set_ios
> > >            in sd_uhs2_power_off().
> > >            Drop MMC_TIMING_SD_UHS2 in favor of MMC_TIMING_UHS2_SPEED_A.
> > >            Modify sd_uhs2_legacy_init to avoid the
> > >            sd_uhs2_reinit cycle issue.
> > > * Patch#5: Drop unnecessary definitions.
> > > * Patch#6: Drop unnecessary function.
> > >            Drop uhs2_state in favor of ios->timing.
> > > * Patch#7: Reorder values and positions of definitions.
> > > * Patch#9: Used sdhci_uhs2_mode function to simplify.
> > > * Patch#11: Drop pwr variable in sdhci_uhs2_set_power function.
> > > * Patch#14: Modify some descriptions.
> > >             Drop unnecessary function.
> > > * Patch#15: Drop using uhs2_reset ops and use sdhci_uhs2_reset function
> > >             in the sdhci_do_detect_init function.
> > > * Patch#17: Drop unnecessary function.
> > > * Patch#18: Drop unnecessary whitespace changes.
> > >             Cancel the export state of some functions.
> > > * Patch#19: Drop unnecessary function.
> > >             Used sdhci_uhs2_mode function to simplify.
> > >             Modify some descriptions.
> > >             Cancel the export state of some functions.
> > > * Patch#20: Drop using __sdhci_uhs2_host function and use
> > >             __sdhci_add_host function in sdhci_uhs2_add_host function.
> > >             Cancel the export state of some functions.
> > > * Patch#23: Drop using uhs2_post_attach_sd function.
> > >
> > > Reference
> > > =========
> > > [1] https://gitlab.com/ben.chuang/linux-uhs2-gl9755.git
> > > [2] SD Host Controller Simplified Specification 4.20
> > > [3] UHS-II Simplified Addendum 1.02
> > > [4] https://patchwork.kernel.org/project/linux-mmc/cover/20201106022726.19831-1-takahiro.akashi@xxxxxxxxxx/
> > > [5] https://patchwork.kernel.org/project/linux-mmc/cover/20220418115833.10738-1-jasonlai.genesyslogic@xxxxxxxxx/
> > > [6] https://patchwork.kernel.org/project/linux-mmc/cover/20221019110647.11076-1-victor.shih@xxxxxxxxxxxxxxxxxxx/
> > > [7] https://patchwork.kernel.org/project/linux-mmc/cover/20221213090047.3805-1-victor.shih@xxxxxxxxxxxxxxxxxxx/
> > >
> > > ----------------- original cover letter from v6 -----------------
> > > Summary
> > > =======
> > > These patches[1] support UHS-II and fix GL9755 UHS-II compatibility.
> > >
> > > About UHS-II, roughly deal with the following three parts:
> > > 1) A UHS-II detection and initialization:
> > > - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup Sequence
> > >   [2]).
> > > - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence[2]).
> > > - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include Section
> > >   3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II Setting Register
> > >   Setup Sequence.
> > >
> > > 2) Send Legacy SD command through SD-TRAN
> > > - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy SD
> > >   compatibility and preserve Legacy SD infrastructures (Section 7.1.1 Packet
> > >   Types and Format Overview[3]).
> > > - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II
> > >   CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]).
> > >
> > > 3) UHS-II Interrupt
> > > - Except for UHS-II error interrupts, most interrupts share the original
> > >   interrupt registers.
> > >
> > > Patch structure
> > > ===============
> > > patch#1-#6:  for core
> > > patch#7-#23: for sdhci
> > > patch#24:    for GL9755
> > >
> > > Changes in v6 (Dec. 12, 2022)
> > > * rebased to the linux-kernel-v6.1.0-rc8 in Ulf Hansson next branch.
> > > * according to the guidance and overall architecture provided
> > >   by Ulf Hansson, Ben Chuang and Jason Lai to implement the
> > >   UHS-2 Core function based on the patches of the [V4,0/6]
> > >   Preparations to support SD UHS-II cards[5].
> > > * according to the guidance and comments provided by
> > >   Adrian Hunter, Ben Chuang and AKASHI Takahiro to implement
> > >   the UHS-2 Host function based on the patches of the
> > >   [RFC,v3.1,00/27] Add support UHS-II for GL9755[4].
> > > * implement the necessary function to let the UHS-2 Core/Host
> > >   work properly.
> > > * fix most of checkpatch warnings/errors.
> > > * according to the guidance and comments provided by
> > >   Adrian Hunter, Ben Chuang to implement the UHS-2
> > >   Host function based on the patches of the
> > >   [V5,00/26] Add support UHS-II for GL9755[6].
> > > * The uhs2_post_attach_sd() has implemented in Patch#6 and
> > >   Patch#17 so drop the V5 version of the Patch#23.
> > > * Modifies the usage of the flags used by the sdhci host for
> > >   MMC_UHS2_INITIALIZED.
> > > * Patch#5: Drop unused definitions and functions.
> > > * Patch#7: Rename definitions.
> > >            Use BIT() GENMASK() in some cases.
> > > * Patch#8: Merge V5 version of Patch[7] and Patch[9] into
> > >            V6 version of Patch[8].
> > > * Patch#9: Drop unnecessary function.
> > >            Rename used definitions.
> > > * Patch#10: Drop unnecessary function and simplify some code.
> > > * Patch#11: Drop unnecessary function.
> > >             Add new mmc_opt_regulator_set_ocr function.
> > > * Patch#13: Drop unnecessary function.
> > >             Use GENMASK() and FIELD_PREP() in some cases.
> > > * Patch#14: Drop unnecessary function.
> > >             Modify return value in some function.
> > >             Use GENMASK() and FIELD_PREP() in some cases.
> > > * Patch#15: Drop unnecessary function.
> > >             Rename used definitions.
> > >             Use GENMASK() and FIELD_GET() in some cases.
> > >             Wrap at 100 columns in some functions.
> > > * Patch#16: Drop unnecessary function.
> > > * Patch#17: Drop unnecessary function.
> > >             Drop the unnecessary parameter when call the DBG()
> > >             function.
> > >             Rename used definitions.
> > >             Cancel the export state of some functions.
> > >             Use GENMASK() and FIELD_PREP() in some cases.
> > > * Patch#18: Drop unnecessary function.
> > >             Add uhs2_dev_cmd function to simplify some functions.
> > >             Rename used definitions.
> > >             Cancel the export state of some functions.
> > >             Use GENMASK() and FIELD_PREP() in some cases.
> > > * Patch#19: Drop unnecessary function.
> > >             Add sdhci_uhs2_mode() in some functions.
> > >             Rename used definitions.
> > >             Cancel the export state of some functions.
> > > * Patch#20: Add new complete_work_fn/thread_irq_fn variables in
> > >             struct sdhci_host.
> > >             Use complete_work_fn/thread_irq_fn variables in
> > >             sdhci_alloc_host()/sdhci_uhs2_add_host().
> > >             Rename used definitions.
> > > * Patch[24]: Rename used definitions.
> > >
> > > Reference
> > > =========
> > > [1] https://gitlab.com/ben.chuang/linux-uhs2-gl9755.git
> > > [2] SD Host Controller Simplified Specification 4.20
> > > [3] UHS-II Simplified Addendum 1.02
> > > [4] https://patchwork.kernel.org/project/linux-mmc/cover/20201106022726.19831-1-takahiro.akashi@xxxxxxxxxx/
> > > [5] https://patchwork.kernel.org/project/linux-mmc/cover/20220418115833.10738-1-jasonlai.genesyslogic@xxxxxxxxx/
> > > [6] https://patchwork.kernel.org/project/linux-mmc/cover/20221019110647.11076-1-victor.shih@xxxxxxxxxxxxxxxxxxx/
> > >
> > > ----------------- original cover letter from v5 -----------------
> > > Summary
> > > =======
> > > These patches[1] support UHS-II and fix GL9755 UHS-II compatibility.
> > >
> > > About UHS-II, roughly deal with the following three parts:
> > > 1) A UHS-II detection and initialization:
> > > - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup Sequence
> > >   [2]).
> > > - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence[2]).
> > > - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include Section
> > >   3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II Setting Register
> > >   Setup Sequence.
> > >
> > > 2) Send Legacy SD command through SD-TRAN
> > > - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy SD
> > >   compatibility and preserve Legacy SD infrastructures (Section 7.1.1 Packet
> > >   Types and Format Overview[3]).
> > > - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II
> > >   CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]).
> > >
> > > 3) UHS-II Interrupt
> > > - Except for UHS-II error interrupts, most interrupts share the original
> > >   interrupt registers.
> > >
> > > Patch structure
> > > ===============
> > > patch#1-#6:  for core
> > > patch#7-#25: for sdhci
> > > patch#26:    for GL9755
> > >
> > > Changes in v5 (Oct. 19, 2022)
> > > * rebased to the linux-kernel-v6.1-rc1 in Ulf Hansson next branch.
> > > * according to the guidance and overall architecture provided
> > >   by Ulf Hansson, Ben Chuang and Jason Lai to implement the
> > >   UHS-2 Core function based on the patches of the [V4,0/6]
> > >   Preparations to support SD UHS-II cards[5].
> > > * according to the guidance and comments provided by
> > >   Adrian Hunter, Ben Chuang and AKASHI Takahiro to implement
> > >   the UHS-2 Host function based on the patches of the
> > >   [RFC,v3.1,00/27] Add support UHS-II for GL9755[4].
> > > * implement the necessary function to let the UHS-2 Core/Host
> > >   work properly.
> > > * fix most of checkpatch warnings/errors
> > >
> > > Reference
> > > =========
> > > [1] https://gitlab.com/ben.chuang/linux-uhs2-gl9755.git
> > > [2] SD Host Controller Simplified Specification 4.20
> > > [3] UHS-II Simplified Addendum 1.02
> > > [4] https://patchwork.kernel.org/project/linux-mmc/cover/20201106022726.19831-1-takahiro.akashi@xxxxxxxxxx/
> > > [5] https://patchwork.kernel.org/project/linux-mmc/cover/20220418115833.10738-1-jasonlai.genesyslogic@xxxxxxxxx/
> > >
> > > ----------------- original cover letter from v3.1 -----------------
> > > This is an interim snapshot of our next version, v4, for enabling
> > > UHS-II on MMC/SD.
> > >
> > > It is focused on 'sdhci' side to address Adrian's comments regarding
> > > "modularising" sdhci-uhs2.c.
> > > The whole aim of this version is to get early feedback from Adrian (and
> > > others) on this issue. Without any consensus about the code structure,
> > > it would make little sense to go further ahead on sdhci side.
> > > (Actually, Adrian has made no comments other than "modularising" so far.)
> > >
> > > I heavily reworked/refactored sdhci-uhs2.c and re-organised the patch
> > > set to meet what I believe Adrian expects; no UHS-II related code in
> > > Legacy (UHS-I) code or sdhci.c.
> > >
> > > Nevertheless, almost of all changes I made are trivial and straightforward
> > > in this direction, and I believe that there is no logic changed since v3
> > > except sdhci_uhs2_irq(), as ops->irq hook, where we must deal with UHS-II
> > > command sequences in addition to UHS-II errors. So I added extra handlings.
> > >
> > > I admit that there is plenty of room for improvements (for example,
> > > handling host->flags), but again the focal point here is how sdhci-uhs2.c
> > > should be built as a module.
> > >
> > > Please review this series (particularly Patch#8-#26 and #27) from this
> > > viewpoint in the first place.
> > > (Ben is working on 'host' side but there is no change on 'host' side
> > > in this submission except a minor tweak.)
> > >
> > > Thanks,
> > > -Takahiro Akashi
> > >
> > > ------ original cover letter from v3 ------
> > > Summary
> > > =======
> > > These patches[1] support UHS-II and fix GL9755 UHS-II compatibility.
> > >
> > > About UHS-II, roughly deal with the following three parts:
> > > 1) A UHS-II detection and initialization:
> > > - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup Sequence
> > >   [2]).
> > > - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence[2]).
> > > - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include Section
> > >   3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II Setting Register
> > >   Setup Sequence.
> > >
> > > 2) Send Legacy SD command through SD-TRAN
> > > - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy SD
> > >   compatibility and preserve Legacy SD infrastructures (Section 7.1.1 Packet
> > >   Types and Format Overview[3]).
> > > - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II
> > >   CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]).
> > >
> > > 3) UHS-II Interrupt
> > > - Except for UHS-II error interrupts, most interrupts share the original
> > >   interrupt registers.
> > >
> > > Patch structure
> > > ===============
> > > patch#1-#7: for core
> > > patch#8-#17: for sdhci
> > > patch#18-#21: for GL9755
> > >
> > > Tests
> > > =====
> > > Ran 'dd' command to evaluate the performance:
> > > (SanDisk UHS-II card on GL9755 controller)
> > >                              Read    Write
> > > UHS-II disabled (UHS-I): 88.3MB/s 60.7MB/s
> > > UHS-II enabled         :  206MB/s   80MB/s
> > >
> > > TODO
> > > ====
> > > - replace some define with BIT macro
> > >
> > > Reference
> > > =========
> > > [1] https://gitlab.com/ben.chuang/linux-uhs2-gl9755.git
> > > [2] SD Host Controller Simplified Specification 4.20
> > > [3] UHS-II Simplified Addendum 1.02
> > >
> > > Changes in v3 (Jul. 10, 2020)
> > > * rebased to v5.8-rc4
> > > * add copyright notice
> > > * reorganize the patch set and split some commits into smaller ones
> > > * separate uhs-2 headers from others
> > > * correct wrong spellings
> > > * fix most of checkpatch warnings/errors
> > > * remove all k[cz]alloc() from the code
> > > * guard sdhci-uhs2 specific code with
> > >       'if (IS_ENABLED(CONFIG_MMC_SDHCI_UHS2))'
> > > * make sdhci-uhs2.c as a module
> > > * trivial changes, including
> > >   - rename back sdhci-core.c to sdhci.c
> > >   - allow vendor code to disable uhs2 if v4_mode == 0
> > >       in __sdhci_add_host()
> > >   - merge uhs2_power_up() into mmc_power_up()
> > >   - remove flag_uhs2 from mmc_attach_sd()
> > >   - add function descriptions to EXPORT'ed functions
> > >   - other minor code optimization
> > >
> > > Changes in v2 (Jan. 9, 2020)
> > > * rebased to v5.5-rc5
> > >
> > > Ben Chuang (1):
> > >   mmc: sdhci-uhs2: add pre-detect_init hook
> > >
> > > Ulf Hansson (4):
> > >   mmc: core: Cleanup printing of speed mode at card insertion
> > >   mmc: core: Prepare to support SD UHS-II cards
> > >   mmc: core: Announce successful insertion of an SD UHS-II card
> > >   mmc: core: Extend support for mmc regulators with a vqmmc2
> > >
> > > Victor Shih (17):
> > >   mmc: core: Add definitions for SD UHS-II cards
> > >   mmc: core: Add New function to re-factoring the code
> > >   mmc: core: Support UHS-II card control and access
> > >   mmc: sdhci: add UHS-II related definitions in headers
> > >   mmc: sdhci: add UHS-II module and add a kernel configuration
> > >   mmc: sdhci-uhs2: dump UHS-II registers
> > >   mmc: sdhci-uhs2: add reset function function
> > >   mmc: sdhci-uhs2: add set_power() to support vdd2
> > >   mmc: sdhci-uhs2: add set_timeout()
> > >   mmc: sdhci-uhs2: add set_ios()
> > >   mmc: sdhci-uhs2: add uhs2_control() to initialise the interface
> > >   mmc: sdhci-uhs2: add request() and others
> > >   mmc: sdhci-uhs2: add irq() and others
> > >   mmc: sdhci-uhs2: add add_host() and others to set up the driver
> > >   mmc: sdhci-pci: add UHS-II support framework
> > >   mmc: sdhci-pci-gli: enable UHS-II mode for GL9755
> > >   mmc: sdhci-pci-gli: enable UHS-II mode for GL9767
> > >
> > >  drivers/mmc/core/Makefile         |    2 +-
> > >  drivers/mmc/core/bus.c            |   38 +-
> > >  drivers/mmc/core/core.c           |   23 +-
> > >  drivers/mmc/core/core.h           |    1 +
> > >  drivers/mmc/core/mmc_ops.c        |   24 +-
> > >  drivers/mmc/core/mmc_ops.h        |    1 +
> > >  drivers/mmc/core/regulator.c      |   34 +
> > >  drivers/mmc/core/sd.c             |   10 +-
> > >  drivers/mmc/core/sd.h             |    5 +
> > >  drivers/mmc/core/sd_ops.c         |    9 +
> > >  drivers/mmc/core/sd_ops.h         |   13 +
> > >  drivers/mmc/core/sd_uhs2.c        | 1326 +++++++++++++++++++++++++++++
> > >  drivers/mmc/host/Kconfig          |   10 +
> > >  drivers/mmc/host/Makefile         |    1 +
> > >  drivers/mmc/host/sdhci-pci-core.c |   16 +-
> > >  drivers/mmc/host/sdhci-pci-gli.c  |  382 ++++++++-
> > >  drivers/mmc/host/sdhci-pci.h      |    3 +
> > >  drivers/mmc/host/sdhci-uhs2.c     | 1272 +++++++++++++++++++++++++++
> > >  drivers/mmc/host/sdhci-uhs2.h     |  190 +++++
> > >  drivers/mmc/host/sdhci.c          |  281 +++---
> > >  drivers/mmc/host/sdhci.h          |   75 +-
> > >  include/linux/mmc/card.h          |   36 +
> > >  include/linux/mmc/core.h          |   17 +
> > >  include/linux/mmc/host.h          |   80 ++
> > >  include/linux/mmc/sd_uhs2.h       |  240 ++++++
> > >  25 files changed, 3939 insertions(+), 150 deletions(-)
> > >  create mode 100644 drivers/mmc/core/sd_uhs2.c
> > >  create mode 100644 drivers/mmc/host/sdhci-uhs2.c
> > >  create mode 100644 drivers/mmc/host/sdhci-uhs2.h
> > >  create mode 100644 include/linux/mmc/sd_uhs2.h
> > >
> >





[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux