[RFC PATCH V2 06/12] i2c: tegra: split clock initialization code

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add new methods for setting clock parameters and setting
clock divisor.

Signed-off-by: Krishna Yarlagadda <kyarlagadda@xxxxxxxxxx>
---
 drivers/i2c/busses/i2c-tegra.c | 127 ++++++++++++++++++++-------------
 1 file changed, 77 insertions(+), 50 deletions(-)

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 85b31edc558d..b3dc2603db35 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -604,12 +604,83 @@ static int tegra_i2c_wait_for_config_load(struct tegra_i2c_dev *i2c_dev)
 	return 0;
 }
 
+static void tegra_i2c_set_clk_params(struct tegra_i2c_dev *i2c_dev)
+{
+	u32 val, clk_divisor, tsu_thd, tlow, thigh, non_hs_mode;
+
+	switch (i2c_dev->timings.bus_freq_hz) {
+	case I2C_MAX_STANDARD_MODE_FREQ + 1 ... I2C_MAX_FAST_MODE_PLUS_FREQ:
+	default:
+		tlow = i2c_dev->hw->tlow_fast_fastplus_mode;
+		thigh = i2c_dev->hw->thigh_fast_fastplus_mode;
+		tsu_thd = i2c_dev->hw->setup_hold_time_fast_fast_plus_mode;
+
+		if (i2c_dev->timings.bus_freq_hz > I2C_MAX_FAST_MODE_FREQ)
+			non_hs_mode = i2c_dev->hw->clk_divisor_fast_plus_mode;
+		else
+			non_hs_mode = i2c_dev->hw->clk_divisor_fast_mode;
+		break;
+
+	case 0 ... I2C_MAX_STANDARD_MODE_FREQ:
+		tlow = i2c_dev->hw->tlow_std_mode;
+		thigh = i2c_dev->hw->thigh_std_mode;
+		tsu_thd = i2c_dev->hw->setup_hold_time_std_mode;
+		non_hs_mode = i2c_dev->hw->clk_divisor_std_mode;
+		break;
+	}
+
+	/* make sure clock divisor programmed correctly */
+	clk_divisor = FIELD_PREP(I2C_CLK_DIVISOR_HSMODE,
+				 i2c_dev->hw->clk_divisor_hs_mode) |
+		      FIELD_PREP(I2C_CLK_DIVISOR_STD_FAST_MODE, non_hs_mode);
+	i2c_writel(i2c_dev, clk_divisor, I2C_CLK_DIVISOR);
+
+	if (i2c_dev->hw->has_interface_timing_reg) {
+		val = FIELD_PREP(I2C_INTERFACE_TIMING_THIGH, thigh) |
+		      FIELD_PREP(I2C_INTERFACE_TIMING_TLOW, tlow);
+		i2c_writel(i2c_dev, val, I2C_INTERFACE_TIMING_0);
+	}
+
+	/*
+	 * Configure setup and hold times only when tsu_thd is non-zero.
+	 * Otherwise, preserve the chip default values.
+	 */
+	if (i2c_dev->hw->has_interface_timing_reg && tsu_thd)
+		i2c_writel(i2c_dev, tsu_thd, I2C_INTERFACE_TIMING_1);
+}
+
+static int tegra_i2c_set_div_clk(struct tegra_i2c_dev *i2c_dev)
+{
+	u32 clk_multiplier, tlow, thigh, non_hs_mode;
+	u32 timing, clk_divisor;
+	int err;
+
+	timing = i2c_readl(i2c_dev, I2C_INTERFACE_TIMING_0);
+
+	tlow = FIELD_GET(I2C_INTERFACE_TIMING_TLOW, timing);
+	thigh = FIELD_GET(I2C_INTERFACE_TIMING_THIGH, timing);
+
+	clk_divisor = i2c_readl(i2c_dev, I2C_CLK_DIVISOR);
+
+	non_hs_mode = FIELD_GET(I2C_CLK_DIVISOR_STD_FAST_MODE, clk_divisor);
+
+	clk_multiplier = (thigh + tlow + 2) * (non_hs_mode + 1);
+
+	err = clk_set_rate(i2c_dev->div_clk,
+			   i2c_dev->timings.bus_freq_hz * clk_multiplier);
+	if (err) {
+		dev_err(i2c_dev->dev, "failed to set div_clk rate: %d\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
 static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
 {
-	u32 val, clk_divisor, clk_multiplier, tsu_thd, tlow, thigh, non_hs_mode;
+	u32 val;
+	int err;
 	acpi_handle handle = ACPI_HANDLE(i2c_dev->dev);
-	struct i2c_timings *t = &i2c_dev->timings;
-	int err;
 
 	/*
 	 * The reset shouldn't ever fail in practice. The failure will be a
@@ -641,54 +712,10 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
 	if (IS_VI(i2c_dev))
 		tegra_i2c_vi_init(i2c_dev);
 
-	switch (t->bus_freq_hz) {
-	case I2C_MAX_STANDARD_MODE_FREQ + 1 ... I2C_MAX_FAST_MODE_PLUS_FREQ:
-	default:
-		tlow = i2c_dev->hw->tlow_fast_fastplus_mode;
-		thigh = i2c_dev->hw->thigh_fast_fastplus_mode;
-		tsu_thd = i2c_dev->hw->setup_hold_time_fast_fast_plus_mode;
-
-		if (t->bus_freq_hz > I2C_MAX_FAST_MODE_FREQ)
-			non_hs_mode = i2c_dev->hw->clk_divisor_fast_plus_mode;
-		else
-			non_hs_mode = i2c_dev->hw->clk_divisor_fast_mode;
-		break;
-
-	case 0 ... I2C_MAX_STANDARD_MODE_FREQ:
-		tlow = i2c_dev->hw->tlow_std_mode;
-		thigh = i2c_dev->hw->thigh_std_mode;
-		tsu_thd = i2c_dev->hw->setup_hold_time_std_mode;
-		non_hs_mode = i2c_dev->hw->clk_divisor_std_mode;
-		break;
-	}
-
-	/* make sure clock divisor programmed correctly */
-	clk_divisor = FIELD_PREP(I2C_CLK_DIVISOR_HSMODE,
-				 i2c_dev->hw->clk_divisor_hs_mode) |
-		      FIELD_PREP(I2C_CLK_DIVISOR_STD_FAST_MODE, non_hs_mode);
-	i2c_writel(i2c_dev, clk_divisor, I2C_CLK_DIVISOR);
-
-	if (i2c_dev->hw->has_interface_timing_reg) {
-		val = FIELD_PREP(I2C_INTERFACE_TIMING_THIGH, thigh) |
-		      FIELD_PREP(I2C_INTERFACE_TIMING_TLOW, tlow);
-		i2c_writel(i2c_dev, val, I2C_INTERFACE_TIMING_0);
-	}
-
-	/*
-	 * Configure setup and hold times only when tsu_thd is non-zero.
-	 * Otherwise, preserve the chip default values.
-	 */
-	if (i2c_dev->hw->has_interface_timing_reg && tsu_thd)
-		i2c_writel(i2c_dev, tsu_thd, I2C_INTERFACE_TIMING_1);
-
-	clk_multiplier = (tlow + thigh + 2) * (non_hs_mode + 1);
-
-	err = clk_set_rate(i2c_dev->div_clk,
-			   t->bus_freq_hz * clk_multiplier);
-	if (err) {
-		dev_err(i2c_dev->dev, "failed to set div-clk rate: %d\n", err);
+	tegra_i2c_set_clk_params(i2c_dev);
+	err = tegra_i2c_set_div_clk(i2c_dev);
+	if (err)
 		return err;
-	}
 
 	if (!IS_DVC(i2c_dev) && !IS_VI(i2c_dev)) {
 		u32 sl_cfg = i2c_readl(i2c_dev, I2C_SL_CNFG);
-- 
2.43.2





[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux