On embedded devices using an eMMC it is common that one or more (hw/sw) partitions on the eMMC are used to store MAC addresses and Wi-Fi calibration EEPROM data. Typically the NVMEM framework is used to have kernel drivers read and use binary data from EEPROMs, efuses, flash memory (MTD), ... Using references to NVMEM bits in Device Tree allows the kernel to access and apply e.g. the Ethernet MAC address, which can be a requirement for userland to come up (e.g. for nfsroot). The goal of this series is to prepare the block subsystem to allow for the implementation of an NVMEM provider similar to other types of non-volatile storage, so the same approach already used for EEPROMs, MTD (raw flashes) and UBI-managed NAND can also be used for devices storing those bits on an eMMC. Define a device tree schema for block devices and partitions on them, which (similar to how it now works also for UBI volumes) can be matched by one or more properties. Also add a simple notification API for other subsystems to be notified about additions and removals of block devices, which is going to be used by the block-backed NVMEM provider. Overall, this enables uniform handling across practially all flash storage types used for this purpose (MTD, UBI, and soon also MMC or and in future maybe also other block devices). --- Changes since v2 sent on May 30th 2024 [1] addressing comments from Hauke Mehrtens (https://patchwork.kernel.org/comment/25892133/) - Check length of UUID and PARTNAME. - Remove forgotten fallback to get 'partitions' subnode from parent. It is no longer needed and was a left over from earlier development. - Split series into 3 parts, one for each affected subsystem. This is the first part covering only the changes needed in the block subsystem. The second part adds the actual nvmem provider to drivers/nvmem/, the third part is going to make use of it for MMC block devices and cover changes in drivers/mmc. Changes since v1 sent on March 21st 2024 [2]: - introduce notifications for block device addition and removal for in-kernel users. This allows the nvmem driver to be built as a module and avoids using class_interface and block subsystem internals as suggested in https://patchwork.kernel.org/comment/25771998/ and https://patchwork.kernel.org/comment/25770441/ This series has previously been submitted as RFC on July 19th 2023[3] and most of the basic idea did not change since. Another round of RFC was submitted on March 5th 2024[4]. [1]: https://patchwork.kernel.org/project/linux-block/list/?series=857192 [2]: https://patchwork.kernel.org/project/linux-block/list/?series=837150&archive=both [3]: https://patchwork.kernel.org/project/linux-block/list/?series=767565 [4]: https://patchwork.kernel.org/project/linux-block/list/?series=832705 Daniel Golle (4): dt-bindings: block: add basic bindings for block devices block: partitions: populate fwnode block: add support for notifications block: add new genhd flag GENHD_FL_NVMEM .../bindings/block/block-device.yaml | 22 +++++ .../devicetree/bindings/block/partition.yaml | 51 +++++++++++ .../devicetree/bindings/block/partitions.yaml | 20 +++++ block/Kconfig | 6 ++ block/Makefile | 1 + block/blk-notify.c | 88 +++++++++++++++++++ block/partitions/core.c | 40 +++++++++ include/linux/blkdev.h | 10 +++ 8 files changed, 238 insertions(+) create mode 100644 Documentation/devicetree/bindings/block/block-device.yaml create mode 100644 Documentation/devicetree/bindings/block/partition.yaml create mode 100644 Documentation/devicetree/bindings/block/partitions.yaml create mode 100644 block/blk-notify.c -- 2.45.2
