[PATCH v3 0/3] Add SD/MMC support for Renesas RZ/V2H(P) SoC

[Prabhakar <prabhakar.csengg@xxxxxxxxx>]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>

Hi All,

This patch series aims to add SD/MMC support for Renesas RZ/V2H(P) SoC.

Below is the sample usage of using internal regulator:

SoC DTSI node:
sdhi1: mmc@15c10000 {
        compatible = "renesas,sdhi-r9a09g057";
        reg = <0x0 0x15c10000 0 0x10000>;
        interrupts = <GIC_SPI 737 IRQ_TYPE_LEVEL_HIGH>,
                        <GIC_SPI 738 IRQ_TYPE_LEVEL_HIGH>;
        clocks = <&cpg CPG_MOD 167>,
                        <&cpg CPG_MOD 169>,
                        <&cpg CPG_MOD 168>,
                        <&cpg CPG_MOD 170>;
        clock-names = "core", "clkh", "cd", "aclk";
        resets = <&cpg 168>;
        power-domains = <&cpg>;
        status = "disabled";

        vqmmc_sdhi1: vqmmc-regulator {
                regulator-compatible = "vqmmc-r9a09g057-regulator";
                regulator-name = "sdhi1-vqmmc-regulator";
                regulator-min-microvolt = <1800000>;
                regulator-max-microvolt = <3300000>;
                status = "disabled";
        };
};

* Example of SDHI1 while using internal regulator:
** Board DTS:
&sdhi1 {
        pinctrl-0 = <&sdhi1_pins>;
        pinctrl-1 = <&sdhi1_pins>;
        pinctrl-names = "default", "state_uhs";
        renesas,sdhi-use-internal-regulator;
        vmmc-supply = <&reg_3p3v>;
        vqmmc-supply = <&vqmmc_sdhi1>;
        bus-width = <4>;
        sd-uhs-sdr50;
        sd-uhs-sdr104;
        status = "okay";
};

&vqmmc_sdhi1 {
	status = "okay";
};


* Example of SDHI1 while using GPIO regulator while internal regulator is present:
** Board DTS:
vccq_sdhi1: regulator-vccq-sdhi1 {
        compatible = "regulator-gpio";
        regulator-name = "SDHI1 VccQ";
        regulator-min-microvolt = <1800000>;
        regulator-max-microvolt = <3300000>;
        gpios = <&pinctrl RZG2L_GPIO(10, 2) GPIO_ACTIVE_HIGH>;
        gpios-states = <0>;
        states = <3300000 0>, <1800000 1>;
};

&sdhi1 {
        pinctrl-0 = <&sdhi1_pins>;
        pinctrl-1 = <&sdhi1_pins>;
        pinctrl-names = "default", "state_uhs";
        vmmc-supply = <&reg_3p3v>;
        vqmmc-supply = <&vccq_sdhi1>;
        bus-width = <4>;
        sd-uhs-sdr50;
        sd-uhs-sdr104;
        status = "okay";
};

v2->v3
- Renamed vqmmc-r9a09g057-regulator object to vqmmc-regulator
- Added regulator-compatible property for vqmmc-regulator
- Added 'renesas,sdhi-use-internal-regulator' DT property
- Included RB tags for patch 2/3
- Moved regulator info to renesas_sdhi_of_data instead of quirks
- Added support to configure the init state of regulator
- Added function pointers to configure regulator
- Added REGULATOR_CHANGE_VOLTAGE mask

v1->v2
- Dropped regulator core API changes
- Updated DT binding
- Now controlling PWEN bit via regultor api

v1: https://patchwork.kernel.org/project/linux-renesas-soc/cover/20240605074936.578687-1-prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx/

Cheers,
Prabhakar

Lad Prabhakar (3):
  dt-bindings: mmc: renesas,sdhi: Document RZ/V2H(P) support
  mmc: tmio: Use MMC core APIs to control the vqmmc regulator
  mmc: renesas_sdhi: Add support for RZ/V2H(P) SoC

 .../devicetree/bindings/mmc/renesas,sdhi.yaml |  30 +++-
 drivers/mmc/host/renesas_sdhi.h               |  13 ++
 drivers/mmc/host/renesas_sdhi_core.c          |  93 +++++++++++
 drivers/mmc/host/renesas_sdhi_internal_dmac.c | 150 ++++++++++++++++++
 drivers/mmc/host/tmio_mmc.h                   |   5 +
 drivers/mmc/host/tmio_mmc_core.c              |   7 +-
 6 files changed, 293 insertions(+), 5 deletions(-)

-- 
2.34.1