[PATCH V17 22/22] mmc: sdhci-pci-gli: enable UHS-II mode for GL9767

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Victor Shih <victor.shih@xxxxxxxxxxxxxxxxxxx>

Changes are:
 * Enable the internal clock when do reset on UHS-II mode.
 * Increase timeout value before detecting UHS-II interface.
 * Add vendor settings for UHS-II mode.

Signed-off-by: Ben Chuang <ben.chuang@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Victor Shih <victor.shih@xxxxxxxxxxxxxxxxxxx>
---

Updates in V17:
 - Use mmc_card_uhs2() to simplify the code in the sdhci_gl9767_reset().
 - Use mmc_card_uhs2() to simplify the code in the
   sdhci_gl9767_set_power().
 - Add sdhci_gli_overcurrent_event_enable() to sdhci_gl9767_set_power().

Updates in V15:
 - Add gl9767 to support uhs2 function.

---

 drivers/mmc/host/sdhci-pci-gli.c | 150 ++++++++++++++++++++++++++++++-
 1 file changed, 148 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
index a4164948de81..37c63c45bdc9 100644
--- a/drivers/mmc/host/sdhci-pci-gli.c
+++ b/drivers/mmc/host/sdhci-pci-gli.c
@@ -210,6 +210,10 @@
 #define   PCIE_GLI_9767_SCR_CORE_PWR_D3_OFF		  BIT(21)
 #define   PCIE_GLI_9767_SCR_CFG_RST_DATA_LINK_DOWN	  BIT(30)
 
+#define PCIE_GLI_9767_UHS2_PHY_SET_REG1				0x90C
+#define   PCIE_GLI_9767_UHS2_PHY_SET_REG1_SERDES_INTR		  GENMASK(31, 29)
+#define   PCIE_GLI_9767_UHS2_PHY_SET_REG1_SERDES_INTR_VALUE	  0x3
+
 #define PCIE_GLI_9767_SDHC_CAP			0x91C
 #define   PCIE_GLI_9767_SDHC_CAP_SDEI_RESULT	  BIT(5)
 
@@ -228,9 +232,15 @@
 #define   PCIE_GLI_9767_SD_EXPRESS_CTL_SD_EXPRESS_MODE	  BIT(1)
 
 #define PCIE_GLI_9767_SD_DATA_MULTI_CTL				0x944
+#define   PCIE_GLI_9767_SD_DATA_MULTI_CTL_SELECT_UHS2		  BIT(5)
+#define   PCIE_GLI_9767_SD_DATA_MULTI_CTL_UHS2_SWITCH_CTL	  BIT(8)
 #define   PCIE_GLI_9767_SD_DATA_MULTI_CTL_DISCONNECT_TIME	  GENMASK(23, 16)
 #define   PCIE_GLI_9767_SD_DATA_MULTI_CTL_DISCONNECT_TIME_VALUE	  0x64
 
+#define PCIE_GLI_9767_UHS2_PHY_SET_REG2					0x948
+#define   PCIE_GLI_9767_UHS2_PHY_SET_REG2_SSC_PPM_SETTING		  GENMASK(22, 21)
+#define   PCIE_GLI_9767_UHS2_PHY_SET_REG2_SSC_PPM_SETTING_VALUE		  0x0
+
 #define PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2			0x950
 #define   PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2_SDEI_COMPLETE	  BIT(0)
 
@@ -240,6 +250,28 @@
 #define PCIE_GLI_9767_NORMAL_ERR_INT_SIGNAL_EN_REG2				0x958
 #define   PCIE_GLI_9767_NORMAL_ERR_INT_SIGNAL_EN_REG2_SDEI_COMPLETE_SIGNAL_EN	  BIT(0)
 
+#define PCIE_GLI_9767_UHS2_CTL1				0x95C
+#define   PCIE_GLI_9767_UHS2_CTL1_TRANS_PASS		  BIT(5)
+#define   PCIE_GLI_9767_UHS2_CTL1_TRANS_PASS_VALUE	  0x1
+#define   PCIE_GLI_9767_UHS2_CTL1_DECODING_CTL		  BIT(6)
+#define   PCIE_GLI_9767_UHS2_CTL1_DECODING_CTL_VALUE	  0x1
+#define   PCIE_GLI_9767_UHS2_CTL1_SERDES_TRAN		  GENMASK(10, 7)
+#define   PCIE_GLI_9767_UHS2_CTL1_SERDES_TRAN_VALUE	  0x3
+#define   PCIE_GLI_9767_UHS2_CTL1_SERDES_RECV		  GENMASK(14, 11)
+#define   PCIE_GLI_9767_UHS2_CTL1_SERDES_RECV_VALUE	  0xf
+#define   PCIE_GLI_9767_UHS2_CTL1_DIR_TRANS		  GENMASK(16, 15)
+#define   PCIE_GLI_9767_UHS2_CTL1_DIR_TRANS_VALUE	  0x3
+#define   PCIE_GLI_9767_UHS2_CTL1_DIR_RECV		  GENMASK(18, 17)
+#define   PCIE_GLI_9767_UHS2_CTL1_DIR_RECV_VALUE	  0x0
+#define   PCIE_GLI_9767_UHS2_CTL1_PDRST			  BIT(25)
+#define   PCIE_GLI_9767_UHS2_CTL1_PDRST_VALUE		  0x1
+
+#define PCIE_GLI_9767_UHS2_CTL2			0x964
+#define   PCIE_GLI_9767_UHS2_CTL2_ZC		  GENMASK(3, 0)
+#define   PCIE_GLI_9767_UHS2_CTL2_ZC_VALUE	  0xb
+#define   PCIE_GLI_9767_UHS2_CTL2_ZC_CTL	  BIT(6)
+#define   PCIE_GLI_9767_UHS2_CTL2_ZC_CTL_VALUE	  0x1
+
 #define GLI_MAX_TUNING_LOOP 40
 
 /* Genesys Logic chipset */
@@ -1197,8 +1229,32 @@ static void gl9767_hw_setting(struct sdhci_pci_slot *slot)
 
 static void sdhci_gl9767_reset(struct sdhci_host *host, u8 mask)
 {
-	sdhci_reset(host, mask);
-	gli_set_9767(host);
+	u16 clk_ctrl;
+	u16 ctrl2;
+
+	if (mmc_card_uhs2(host->mmc)) {
+		/* need internal clock */
+		if (mask & SDHCI_RESET_ALL) {
+			ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+			clk_ctrl = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+
+			if ((ctrl2 & SDHCI_CTRL_V4_MODE) && (ctrl2 & SDHCI_CTRL_UHS2_ENABLE)) {
+				sdhci_writew(host, SDHCI_CLOCK_INT_EN, SDHCI_CLOCK_CONTROL);
+			} else {
+				sdhci_writew(host, SDHCI_CLOCK_INT_EN, SDHCI_CLOCK_CONTROL);
+				sdhci_wait_clock_stable(host);
+				sdhci_writew(host, SDHCI_CTRL_V4_MODE, SDHCI_HOST_CONTROL2);
+			}
+		}
+		if (mask & (SDHCI_RESET_CMD | SDHCI_RESET_DATA))
+			sdhci_gli_uhs2_reset_sd_tran(host);
+
+		sdhci_uhs2_reset(host, mask);
+		gli_set_9767(host);
+	} else {
+		sdhci_reset(host, mask);
+		gli_set_9767(host);
+	}
 }
 
 static int gl9767_init_sd_express(struct mmc_host *mmc, struct mmc_ios *ios)
@@ -1288,6 +1344,88 @@ static int gl9767_init_sd_express(struct mmc_host *mmc, struct mmc_ios *ios)
 	return 0;
 }
 
+static void gl9767_vendor_init(struct sdhci_host *host)
+{
+	struct sdhci_pci_slot *slot = sdhci_priv(host);
+	struct pci_dev *pdev = slot->chip->pdev;
+	u32 value;
+
+	gl9767_vhs_write(pdev);
+
+	pci_read_config_dword(pdev, PCIE_GLI_9767_UHS2_PHY_SET_REG1, &value);
+	value |= FIELD_PREP(PCIE_GLI_9767_UHS2_PHY_SET_REG1_SERDES_INTR,
+			    PCIE_GLI_9767_UHS2_PHY_SET_REG1_SERDES_INTR_VALUE);
+	pci_write_config_dword(pdev, PCIE_GLI_9767_UHS2_PHY_SET_REG1, value);
+
+	pci_read_config_dword(pdev, PCIE_GLI_9767_UHS2_PHY_SET_REG2, &value);
+	value |= FIELD_PREP(PCIE_GLI_9767_UHS2_PHY_SET_REG2_SSC_PPM_SETTING,
+			    PCIE_GLI_9767_UHS2_PHY_SET_REG2_SSC_PPM_SETTING_VALUE);
+	pci_write_config_dword(pdev, PCIE_GLI_9767_UHS2_PHY_SET_REG2, value);
+
+	pci_read_config_dword(pdev, PCIE_GLI_9767_UHS2_CTL1, &value);
+	value |= FIELD_PREP(PCIE_GLI_9767_UHS2_CTL1_TRANS_PASS,
+			    PCIE_GLI_9767_UHS2_CTL1_TRANS_PASS_VALUE) |
+		 FIELD_PREP(PCIE_GLI_9767_UHS2_CTL1_DECODING_CTL,
+			    PCIE_GLI_9767_UHS2_CTL1_DECODING_CTL_VALUE) |
+		 FIELD_PREP(PCIE_GLI_9767_UHS2_CTL1_SERDES_TRAN,
+			    PCIE_GLI_9767_UHS2_CTL1_SERDES_TRAN_VALUE) |
+		 FIELD_PREP(PCIE_GLI_9767_UHS2_CTL1_SERDES_RECV,
+			    PCIE_GLI_9767_UHS2_CTL1_SERDES_RECV_VALUE) |
+		 FIELD_PREP(PCIE_GLI_9767_UHS2_CTL1_DIR_TRANS,
+			    PCIE_GLI_9767_UHS2_CTL1_DIR_TRANS_VALUE) |
+		 FIELD_PREP(PCIE_GLI_9767_UHS2_CTL1_DIR_RECV,
+			    PCIE_GLI_9767_UHS2_CTL1_DIR_RECV_VALUE) |
+		 FIELD_PREP(PCIE_GLI_9767_UHS2_CTL1_PDRST,
+			    PCIE_GLI_9767_UHS2_CTL1_PDRST_VALUE);
+	pci_write_config_dword(pdev, PCIE_GLI_9767_UHS2_CTL1, value);
+
+	pci_read_config_dword(pdev, PCIE_GLI_9767_UHS2_CTL2, &value);
+	value |= FIELD_PREP(PCIE_GLI_9767_UHS2_CTL2_ZC,
+			    PCIE_GLI_9767_UHS2_CTL2_ZC_VALUE) |
+		 FIELD_PREP(PCIE_GLI_9767_UHS2_CTL2_ZC_CTL,
+			    PCIE_GLI_9767_UHS2_CTL2_ZC_CTL_VALUE);
+	pci_write_config_dword(pdev, PCIE_GLI_9767_UHS2_CTL2, value);
+
+	gl9767_vhs_read(pdev);
+}
+
+static void sdhci_gl9767_set_power(struct sdhci_host *host, unsigned char mode,	unsigned short vdd)
+{
+	struct sdhci_pci_slot *slot = sdhci_priv(host);
+	struct pci_dev *pdev;
+	u32 value;
+
+	pdev = slot->chip->pdev;
+
+	if (mmc_card_uhs2(host->mmc)) {
+		gl9767_vhs_write(pdev);
+
+		pci_read_config_dword(pdev, PCIE_GLI_9767_SD_DATA_MULTI_CTL, &value);
+		value |= PCIE_GLI_9767_SD_DATA_MULTI_CTL_SELECT_UHS2 |
+			 PCIE_GLI_9767_SD_DATA_MULTI_CTL_UHS2_SWITCH_CTL;
+		pci_write_config_dword(pdev, PCIE_GLI_9767_SD_DATA_MULTI_CTL, value);
+
+		gl9767_vhs_read(pdev);
+
+		sdhci_gli_overcurrent_event_enable(host, false);
+		sdhci_uhs2_set_power(host, mode, vdd);
+		sdhci_gli_overcurrent_event_enable(host, true);
+	} else {
+		gl9767_vhs_write(pdev);
+
+		pci_read_config_dword(pdev, PCIE_GLI_9767_SD_DATA_MULTI_CTL, &value);
+		value &= ~(PCIE_GLI_9767_SD_DATA_MULTI_CTL_SELECT_UHS2 |
+			   PCIE_GLI_9767_SD_DATA_MULTI_CTL_UHS2_SWITCH_CTL);
+		pci_write_config_dword(pdev, PCIE_GLI_9767_SD_DATA_MULTI_CTL, value);
+
+		gl9767_vhs_read(pdev);
+
+		sdhci_gli_overcurrent_event_enable(host, false);
+		sdhci_set_power(host, mode, vdd);
+		sdhci_gli_overcurrent_event_enable(host, true);
+	}
+}
+
 static int gli_probe_slot_gl9750(struct sdhci_pci_slot *slot)
 {
 	struct sdhci_host *host = slot->host;
@@ -1324,6 +1462,7 @@ static int gli_probe_slot_gl9767(struct sdhci_pci_slot *slot)
 	host->mmc->caps2 |= MMC_CAP2_SD_EXP;
 	host->mmc_host_ops.init_sd_express = gl9767_init_sd_express;
 	sdhci_enable_v4_mode(host);
+	gl9767_vendor_init(host);
 
 	return 0;
 }
@@ -1827,12 +1966,19 @@ static const struct sdhci_ops sdhci_gl9767_ops = {
 	.reset			 = sdhci_gl9767_reset,
 	.set_uhs_signaling	 = sdhci_set_uhs_signaling,
 	.voltage_switch		 = sdhci_gl9767_voltage_switch,
+	.dump_uhs2_regs		 = sdhci_uhs2_dump_regs,
+	.set_timeout		 = sdhci_uhs2_set_timeout,
+	.irq			 = sdhci_uhs2_irq,
+	.set_power		 = sdhci_gl9767_set_power,
+	.uhs2_pre_detect_init	 = sdhci_gli_pre_detect_init,
 };
 
 const struct sdhci_pci_fixes sdhci_gl9767 = {
 	.quirks		= SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
 	.quirks2	= SDHCI_QUIRK2_BROKEN_DDR50,
 	.probe_slot	= gli_probe_slot_gl9767,
+	.add_host	= sdhci_pci_uhs2_add_host,
+	.remove_host	= sdhci_pci_uhs2_remove_host,
 	.ops		= &sdhci_gl9767_ops,
 #ifdef CONFIG_PM_SLEEP
 	.resume		= sdhci_pci_gli_resume,
-- 
2.25.1





[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux