Re: [PATCH V16 12/23] mmc: sdhci-uhs2: add reset function function

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, May 31, 2024 at 7:25 PM Adrian Hunter <adrian.hunter@xxxxxxxxx> wrote:
>
> On 31/05/24 13:32, Victor Shih wrote:
> > On Fri, May 24, 2024 at 3:23 PM Adrian Hunter <adrian.hunter@xxxxxxxxx> wrote:
> >>
> >> On 22/05/24 14:08, Victor Shih wrote:
> >>> From: Victor Shih <victor.shih@xxxxxxxxxxxxxxxxxxx>
> >>>
> >>> Sdhci_uhs2_reset() does a UHS-II specific reset operation.
> >>>
> >>> Signed-off-by: Ben Chuang <ben.chuang@xxxxxxxxxxxxxxxxxxx>
> >>> Signed-off-by: AKASHI Takahiro <takahiro.akashi@xxxxxxxxxx>
> >>> Signed-off-by: Victor Shih <victor.shih@xxxxxxxxxxxxxxxxxxx>
> >>> ---
> >>>
> >>> Updates in V15:
> >>>  - Refer the SD Host Controller Standard Specification Section 3.10
> >>>    to add reset command data mechanism.
> >>>
> >>> Updates in V14:
> >>>  - Since mmc_card_uhs2() is the same as sdhci_uhs2_mode(), so drop
> >>>    sdhci_uhs2_mode() and use mmc_card_uhs2() instead of sdhci_uhs2_mode().
> >>>
> >>> Updates in V13:
> >>>  - Use ios timing to stead MMC_UHS2_SUPPORT for indicate the UHS2 mode.
> >>>
> >>> Updates in V8:
> >>>  - Adjust the position of matching brackets.
> >>>
> >>> Updates in V6:
> >>>  - Remove unnecessary functions and simplify code.
> >>>
> >>> ---
> >>>
> >>>  drivers/mmc/host/sdhci-uhs2.c | 57 +++++++++++++++++++++++++++++++++++
> >>>  drivers/mmc/host/sdhci-uhs2.h |  1 +
> >>>  drivers/mmc/host/sdhci.c      |  3 +-
> >>>  drivers/mmc/host/sdhci.h      |  1 +
> >>>  4 files changed, 61 insertions(+), 1 deletion(-)
> >>>
> >>> diff --git a/drivers/mmc/host/sdhci-uhs2.c b/drivers/mmc/host/sdhci-uhs2.c
> >>> index 9cb0f1b2a37d..7652158ea151 100644
> >>> --- a/drivers/mmc/host/sdhci-uhs2.c
> >>> +++ b/drivers/mmc/host/sdhci-uhs2.c
> >>> @@ -10,7 +10,9 @@
> >>>   *  Author: AKASHI Takahiro <takahiro.akashi@xxxxxxxxxx>
> >>>   */
> >>>
> >>> +#include <linux/delay.h>
> >>>  #include <linux/module.h>
> >>> +#include <linux/iopoll.h>
> >>>
> >>>  #include "sdhci.h"
> >>>  #include "sdhci-uhs2.h"
> >>> @@ -21,6 +23,8 @@
> >>>  #define SDHCI_UHS2_DUMP(f, x...) \
> >>>       pr_err("%s: " DRIVER_NAME ": " f, mmc_hostname(host->mmc), ## x)
> >>>
> >>> +#define UHS2_RESET_TIMEOUT_100MS             100000
> >>> +
> >>>  void sdhci_uhs2_dump_regs(struct sdhci_host *host)
> >>>  {
> >>>       if (!(mmc_card_uhs2(host->mmc)))
> >>> @@ -49,6 +53,57 @@ void sdhci_uhs2_dump_regs(struct sdhci_host *host)
> >>>  }
> >>>  EXPORT_SYMBOL_GPL(sdhci_uhs2_dump_regs);
> >>>
> >>> +/*****************************************************************************\
> >>> + *                                                                           *
> >>> + * Low level functions                                                       *
> >>> + *                                                                           *
> >>> +\*****************************************************************************/
> >>> +
> >>> +/**
> >>> + * sdhci_uhs2_reset - invoke SW reset
> >>> + * @host: SDHCI host
> >>> + * @mask: Control mask
> >>> + *
> >>> + * Invoke SW reset, depending on a bit in @mask and wait for completion.
> >>> + */
> >>> +void sdhci_uhs2_reset(struct sdhci_host *host, u16 mask)
> >>> +{
> >>> +     u32 val;
> >>> +
> >>> +     sdhci_writew(host, mask, SDHCI_UHS2_SW_RESET);
> >>> +
> >>> +     if (mask & SDHCI_UHS2_SW_RESET_FULL)
> >>> +             host->clock = 0;
> >>> +
> >>> +     /* hw clears the bit when it's done */
> >>> +     if (read_poll_timeout_atomic(sdhci_readw, val, !(val & mask), 10,
> >>> +                                  UHS2_RESET_TIMEOUT_100MS, true, host, SDHCI_UHS2_SW_RESET)) {
> >>> +             pr_warn("%s: %s: Reset 0x%x never completed. %s: clean reset bit.\n", __func__,
> >>> +                     mmc_hostname(host->mmc), (int)mask, mmc_hostname(host->mmc));
> >>> +             sdhci_writeb(host, 0, SDHCI_UHS2_SW_RESET);
> >>> +             return;
> >>> +     }
> >>> +}
> >>> +EXPORT_SYMBOL_GPL(sdhci_uhs2_reset);
> >>> +
> >>> +static void sdhci_uhs2_reset_cmd_data(struct mmc_host *mmc)
> >>> +{
> >>> +     struct sdhci_host *host = mmc_priv(mmc);
> >>> +
> >>> +     sdhci_do_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
> >>> +
> >>> +     if (host->mmc->ios.timing == MMC_TIMING_UHS2_SPEED_A ||
> >>> +         host->mmc->ios.timing == MMC_TIMING_UHS2_SPEED_A_HD ||
> >>> +         host->mmc->ios.timing == MMC_TIMING_UHS2_SPEED_B ||
> >>> +         host->mmc->ios.timing == MMC_TIMING_UHS2_SPEED_B_HD) {
> >>
> >> Please use mmc_card_uhs2()
> >>
> >
> > Hi, Adrian
> >
> >      I will update this in the v17 version.
> >
> > Thanks, Victor Shih
> >
> >>> +             sdhci_uhs2_reset(host, SDHCI_UHS2_SW_RESET_SD);
> >>> +
> >>> +             sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
> >>> +             sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
> >>> +             sdhci_uhs2_clear_set_irqs(host, SDHCI_INT_ALL_MASK, SDHCI_UHS2_INT_ERROR_MASK);
> >>> +     }
> >>> +}
> >>> +
> >>>  /*****************************************************************************\
> >>>   *                                                                           *
> >>>   * Driver init/exit                                                          *
> >>> @@ -57,6 +112,8 @@ EXPORT_SYMBOL_GPL(sdhci_uhs2_dump_regs);
> >>>
> >>>  static int sdhci_uhs2_host_ops_init(struct sdhci_host *host)
> >>>  {
> >>> +     host->mmc_host_ops.uhs2_reset_cmd_data = sdhci_uhs2_reset_cmd_data;
> >>
> >> As noted for patch 8, any host controller resets needed
> >> should be done before completing the request, so a call
> >> back function should not be needed.
> >>
> >
> > Hi, Adrian
> >
> >      I want to confirm further, so can I call
> > sdhci_uhs2_reset_cmd_data() directly
> >      in the mmc_wait_for_req_done()?
>
> No
>
> >      Am I understanding something wrong?
>
> See the response to your questions over patch 8.
>

Hi, Adrian

I will update the discussion in the patch 8 into patch series v17.

Thanks, Victor Shih

> >
> > Thanks, Victor Shih
> >
> >>> +
> >>>       return 0;
> >>>  }
> >>>
> >>> diff --git a/drivers/mmc/host/sdhci-uhs2.h b/drivers/mmc/host/sdhci-uhs2.h
> >>> index 2bfe18d29bca..caaf9fba4975 100644
> >>> --- a/drivers/mmc/host/sdhci-uhs2.h
> >>> +++ b/drivers/mmc/host/sdhci-uhs2.h
> >>> @@ -177,5 +177,6 @@
> >>>  struct sdhci_host;
> >>>
> >>>  void sdhci_uhs2_dump_regs(struct sdhci_host *host);
> >>> +void sdhci_uhs2_reset(struct sdhci_host *host, u16 mask);
> >>>
> >>>  #endif /* __SDHCI_UHS2_H */
> >>> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> >>> index 8fc3e001db74..f212da6dc2aa 100644
> >>> --- a/drivers/mmc/host/sdhci.c
> >>> +++ b/drivers/mmc/host/sdhci.c
> >>> @@ -236,7 +236,7 @@ void sdhci_reset(struct sdhci_host *host, u8 mask)
> >>>  }
> >>>  EXPORT_SYMBOL_GPL(sdhci_reset);
> >>>
> >>> -static bool sdhci_do_reset(struct sdhci_host *host, u8 mask)
> >>> +bool sdhci_do_reset(struct sdhci_host *host, u8 mask)
> >>>  {
> >>>       if (host->quirks & SDHCI_QUIRK_NO_CARD_NO_RESET) {
> >>>               struct mmc_host *mmc = host->mmc;
> >>> @@ -249,6 +249,7 @@ static bool sdhci_do_reset(struct sdhci_host *host, u8 mask)
> >>>
> >>>       return true;
> >>>  }
> >>> +EXPORT_SYMBOL_GPL(sdhci_do_reset);
> >>>
> >>>  static void sdhci_reset_for_all(struct sdhci_host *host)
> >>>  {
> >>> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> >>> index 13703f1a3710..83d994c8d89e 100644
> >>> --- a/drivers/mmc/host/sdhci.h
> >>> +++ b/drivers/mmc/host/sdhci.h
> >>> @@ -845,6 +845,7 @@ void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq);
> >>>  int sdhci_request_atomic(struct mmc_host *mmc, struct mmc_request *mrq);
> >>>  void sdhci_set_bus_width(struct sdhci_host *host, int width);
> >>>  void sdhci_reset(struct sdhci_host *host, u8 mask);
> >>> +bool sdhci_do_reset(struct sdhci_host *host, u8 mask);
> >>>  void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing);
> >>>  int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode);
> >>>  int __sdhci_execute_tuning(struct sdhci_host *host, u32 opcode);
> >>
>





[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux