Hello Frank,
Please see my comment below.
On 2024-06-11 18:01, Frank Li wrote:
Start from v4 because fsl.esdhc.txt to yaml already sent out as v3.
Change from v3 to v4
- Add dts warning fixes
- Add mmc-spi-slot's voltage range fix, (not sure why it apply to
layserscape's dts file.
- clock-frequency is not required property
- add dma-conherence: true in binding doc
Now only "bit-endian" proptery warning left.
Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
---
Frank Li (8):
dt-bindings: mmc: Convert fsl-esdhc.txt to yaml
dt-bindings: mmc: mmc-spi-slot: Change voltage-ranges to
uint32-matrix
arm64: dts: ls1012a: Chang node name from 'esdhc' to 'mmc'
arm64: dts: ls1043a: Chang node name from 'esdhc' to 'mmc'
arm64: dts: ls1046a: Chang node name from 'esdhc' to 'mmc'
arm64: dts: ls1088a: Chang node name from 'esdhc' to 'mmc'
arm64: dts: ls208ax: Chang node name from 'esdhc' to 'mmc'
arm64: dts: lx2160a: Chang node name from 'esdhc' to 'mmc'
s/Chang /Change / -- in all patch subjects
.../devicetree/bindings/mmc/fsl,esdhc.yaml | 105
+++++++++++++++++++++
.../devicetree/bindings/mmc/fsl-esdhc.txt | 52 ----------
.../devicetree/bindings/mmc/mmc-spi-slot.yaml | 17 ++--
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 4 +-
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 2 +-
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 8 +-
9 files changed, 125 insertions(+), 69 deletions(-)
---
base-commit: d35b2284e966c0bef3e2182a5c5ea02177dd32e4
change-id: 20240610-ls_waring_esdhc-93136a5dd794
Best regards,
---
Frank Li <Frank.Li@xxxxxxx>
