Re: [RFC PATCH 03/11] soc: tegra: config settings binding document

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 07/05/2024 00:51, Krishna Yarlagadda wrote:
> Config framework parses device tree and provides a list of register
> settings with mask per mode to be applied by the controller.
> 
> Add binding document for config settings framework. Config settings
> are defined as a property per field and have different modes per device.

Please use subject prefixes matching the subsystem. You can get them for
example with `git log --oneline -- DIRECTORY_OR_FILE` on the directory
your patch is touching. For bindings, the preferred subjects are
explained here:
https://www.kernel.org/doc/html/latest/devicetree/bindings/submitting-patches.html#i-for-patch-submitters

> 
> Signed-off-by: Krishna Yarlagadda <kyarlagadda@xxxxxxxxxx>
> ---
>  .../misc/nvidia,tegra-config-settings.yaml    | 50 +++++++++++++++++++
>  MAINTAINERS                                   |  1 +
>  2 files changed, 51 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/misc/nvidia,tegra-config-settings.yaml
> 
> diff --git a/Documentation/devicetree/bindings/misc/nvidia,tegra-config-settings.yaml b/Documentation/devicetree/bindings/misc/nvidia,tegra-config-settings.yaml
> new file mode 100644
> index 000000000000..e379cbd5b597
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/misc/nvidia,tegra-config-settings.yaml
> @@ -0,0 +1,50 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/misc/nvidia,tegra-config-settings.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Config properties for a device.

No full stop, that's a title.

> +
> +description:
> +  Config setting is the configuration based on chip/board/system
> +  characterization on interface/controller settings. This is needed for
> +  - making the controller internal configuration to better perform
> +  - making the interface to work proper by setting drive strength, slew
> +    rates etc
> +  - making the low power leakage.
> +  There are two types of recommended configuration settings
> +  - Controller register specific for internal operation of controller.
> +  - Pad control/Pinmux/pincontrol registers for interfacing.
> +  These configurations can further be categorized as static and dynamic.
> +  - Static config does not change until a controller is reset.
> +  - Dynamic config changes based on mode or condition, controller is
> +    operating in.
> +
> +maintainers:
> +  - Thierry Reding <thierry.reding@xxxxxxxxx>
> +
> +patternProperties:
> +  "^[a-z0-9_]*$":
> +    description:
> +      Config name to be applied on controller.
> +    type: object

Nope, this means nothing. Sorry, describe hardware, do not create some
fake nodes.

> +
> +additionalProperties: true
> +
> +examples:
> +  - |
> +        config {

Messed indentation.

> +            common {
> +                nvidia,i2c-hs-sclk-high-period = <0x03>;
> +                nvidia,i2c-hs-sclk-low-period = <0x08>;
> +            };


Best regards,
Krzysztof





[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux