Hi Adrian,
On 4/9/24 12:37 PM, Adrian Hunter wrote:
> On 8/04/24 22:52, Hans de Goede wrote:
>> Unlike all other Bay Trail devices I have (quite a few) the BIOS on
>> the Lenovo Yoga Tablet 2 830 / 1050 and Lenovo Yoga Tablet 2 Pro 1380 (8",
>> 10" and 13") models sets the SDHCI_SUPPORT_DDR50 bit in the sdcard slots'
>> SDHCI controller's Caps_1 register which causes Linux to try and use
>> UHS SDR12 / SDR25 and DDR50 modes on UHS cards.
>>
>> These tablets do have 1.8V signalling implemented in the hw level through
>> the Bay Trail SoC's SD3_1P8EN pin. But trying to use UHS modes leads to
>> lots of errors like these:
>>
>> [ 225.272001] mmc2: Unexpected interrupt 0x04000000.
>> [ 225.272024] mmc2: sdhci: ============ SDHCI REGISTER DUMP ===========
>> [ 225.272034] mmc2: sdhci: Sys addr: 0x0712c400 | Version: 0x0000b502
>> [ 225.272044] mmc2: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000007
>> [ 225.272054] mmc2: sdhci: Argument: 0x00000000 | Trn mode: 0x00000023
>> [ 225.272064] mmc2: sdhci: Present: 0x01e20002 | Host ctl: 0x00000016
>> [ 225.272073] mmc2: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
>> [ 225.272082] mmc2: sdhci: Wake-up: 0x00000000 | Clock: 0x00000107
>> [ 225.272092] mmc2: sdhci: Timeout: 0x0000000e | Int stat: 0x00000001
>> [ 225.272101] mmc2: sdhci: Int enab: 0x03ff000b | Sig enab: 0x03ff000b
>> [ 225.272110] mmc2: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000001
>> [ 225.272119] mmc2: sdhci: Caps: 0x076864b2 | Caps_1: 0x00000004
>> [ 225.272129] mmc2: sdhci: Cmd: 0x00000c1b | Max curr: 0x00000000
>> [ 225.272138] mmc2: sdhci: Resp[0]: 0x00000c00 | Resp[1]: 0x00000000
>> [ 225.272147] mmc2: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000900
>> [ 225.272155] mmc2: sdhci: Host ctl2: 0x0000000c
>> [ 225.272164] mmc2: sdhci: ADMA Err: 0x00000003 | ADMA Ptr: 0x0712c200
>> [ 225.272172] mmc2: sdhci: ============================================
>>
>
> 0x04000000 is so-called "Tuning Error" which oddly the SDHCI driver
> does not support / enable.
>
> Could try making the IRQ handler process it and see if that helps:
Thank you. I'll give this a try when I've some time.
Note though that the factory Android OS actually also sets
(hardcodes) the SDHCI_QUIRK2_NO_1_8_V quirk2 flag for the external
microsd slot and as I mentioned I've not seen any other Bay Trail
device (and I have quite a few) enable UHS modes on their external
sdcard slot. The datasheet for the Bay Trail SoC claims UHS modes
should work, but it seems that in practice the hw-enablement work
for this was never done.
As I mentioned below the cut-off I have even contemplated to
always set SDHCI_QUIRK2_NO_1_8_V on the external sd slot for
all Bay Trail devices because of this. So I'm wondering if
it would not be safer to just disable UHS modes on Bay Trail
devices and leave things at that ?
Part of my thinking here is that given both that it is only
enabled in the first place on these 3 models as well as how old
these tablets are that it might be better to spend time elsewhere?
Regards,
Hans
>
>
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index c79f73459915..746f4cf7ab03 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -3439,12 +3439,18 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
> host->data->error = -EILSEQ;
> if (!mmc_op_tuning(SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND))))
> sdhci_err_stats_inc(host, DAT_CRC);
> - } else if ((intmask & SDHCI_INT_DATA_CRC) &&
> + } else if ((intmask & (SDHCI_INT_DATA_CRC | SDHCI_INT_TUNING_ERROR)) &&
> SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND))
> != MMC_BUS_TEST_R) {
> host->data->error = -EILSEQ;
> if (!mmc_op_tuning(SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND))))
> sdhci_err_stats_inc(host, DAT_CRC);
> + if (intmask & SDHCI_INT_TUNING_ERROR) {
> + u16 ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
> +
> + ctrl2 &= ~SDHCI_CTRL_TUNED_CLK;
> + sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2);
> + }
> } else if (intmask & SDHCI_INT_ADMA_ERROR) {
> pr_err("%s: ADMA error: 0x%08x\n", mmc_hostname(host->mmc),
> intmask);
> @@ -3979,7 +3985,7 @@ bool sdhci_cqe_irq(struct sdhci_host *host, u32 intmask, int *cmd_error,
> } else
> *cmd_error = 0;
>
> - if (intmask & (SDHCI_INT_DATA_END_BIT | SDHCI_INT_DATA_CRC)) {
> + if (intmask & (SDHCI_INT_DATA_END_BIT | SDHCI_INT_DATA_CRC | SDHCI_INT_TUNING_ERROR)) {
> *data_error = -EILSEQ;
> if (!mmc_op_tuning(SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND))))
> sdhci_err_stats_inc(host, DAT_CRC);
> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> index a20864fc0641..957c7a917ffb 100644
> --- a/drivers/mmc/host/sdhci.h
> +++ b/drivers/mmc/host/sdhci.h
> @@ -158,6 +158,7 @@
> #define SDHCI_INT_BUS_POWER 0x00800000
> #define SDHCI_INT_AUTO_CMD_ERR 0x01000000
> #define SDHCI_INT_ADMA_ERROR 0x02000000
> +#define SDHCI_INT_TUNING_ERROR 0x04000000
>
> #define SDHCI_INT_NORMAL_MASK 0x00007FFF
> #define SDHCI_INT_ERROR_MASK 0xFFFF8000
> @@ -169,7 +170,7 @@
> SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \
> SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \
> SDHCI_INT_DATA_END_BIT | SDHCI_INT_ADMA_ERROR | \
> - SDHCI_INT_BLK_GAP)
> + SDHCI_INT_BLK_GAP | SDHCI_INT_TUNING_ERROR)
> #define SDHCI_INT_ALL_MASK ((unsigned int)-1)
>
> #define SDHCI_CQE_INT_ERR_MASK ( \
>
>
