[PATCH 0/2] mmc: sdhci-pci-gli: Remove unnecessary device-dependent code

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>

Previously the driver hard-coded the config space locations of the Power
Management and the AER Capabilities and included device-specific #defines
for bits defined by the PCI spec.  This replaces those with the equivalents
from the PCI core.

This also replace hard-coded power state changes (to D3hot and back to D0)
with the pci_set_power_state() interface, which takes care of the required
delays after these transitions.

Bjorn Helgaas (2):
  mmc: sdhci-pci-gli: Use PCI AER definitions, not hard-coded values
  mmc: sdhci-pci-gli: Use pci_set_power_state(), not direct PMCSR writes

 drivers/mmc/host/sdhci-pci-gli.c | 46 +++++++++++++-------------------
 1 file changed, 18 insertions(+), 28 deletions(-)

-- 
2.34.1





[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux