Add missing properties to enable HS200 timing for MMC0 and SDR104 timing for MMC1 according to the datasheet [0] for AM62p device, refer to Table 7-79 for MMC0 and Table 7-97 for MMC1/MMC2. [0] https://www.ti.com/lit/ds/symlink/am625.pdf Signed-off-by: Judith Mendez <jm@xxxxxx> --- arch/arm64/boot/dts/ti/k3-am62p-main.dtsi | 44 +++++++++++++++++++++-- arch/arm64/boot/dts/ti/k3-am62p5-sk.dts | 6 ++-- 2 files changed, 45 insertions(+), 5 deletions(-) diff --git a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi index 4c51bae06b57..f743700dd5bd 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi @@ -534,7 +534,21 @@ sdhci0: mmc@fa10000 { clock-names = "clk_ahb", "clk_xin"; assigned-clocks = <&k3_clks 57 2>; assigned-clock-parents = <&k3_clks 57 4>; - ti,otap-del-sel-legacy = <0x0>; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + ti,clkbuf-sel = <0x7>; + ti,strobe-sel = <0x77>; + ti,trm-icp = <0x8>; + ti,otap-del-sel-legacy = <0x1>; + ti,otap-del-sel-mmc-hs = <0x1>; + ti,otap-del-sel-ddr52 = <0x6>; + ti,otap-del-sel-hs200 = <0x8>; + ti,otap-del-sel-hs400 = <0x5>; + ti,itap-del-sel-legacy = <0x10>; + ti,itap-del-sel-mmc-hs = <0xa>; + ti,itap-del-sel-ddr52 = <0x3>; status = "disabled"; }; @@ -545,7 +559,19 @@ sdhci1: mmc@fa00000 { power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 58 5>, <&k3_clks 58 6>; clock-names = "clk_ahb", "clk_xin"; - ti,otap-del-sel-legacy = <0x8>; + bus-width = <4>; + ti,clkbuf-sel = <0x7>; + ti,otap-del-sel-legacy = <0x0>; + ti,otap-del-sel-sd-hs = <0x0>; + ti,otap-del-sel-sdr12 = <0xf>; + ti,otap-del-sel-sdr25 = <0xf>; + ti,otap-del-sel-sdr50 = <0xc>; + ti,otap-del-sel-ddr50 = <0x9>; + ti,otap-del-sel-sdr104 = <0x6>; + ti,itap-del-sel-legacy = <0x0>; + ti,itap-del-sel-sd-hs = <0x0>; + ti,itap-del-sel-sdr12 = <0x0>; + ti,itap-del-sel-sdr25 = <0x0>; status = "disabled"; }; @@ -556,7 +582,19 @@ sdhci2: mmc@fa20000 { power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 184 5>, <&k3_clks 184 6>; clock-names = "clk_ahb", "clk_xin"; - ti,otap-del-sel-legacy = <0x8>; + bus-width = <4>; + ti,clkbuf-sel = <0x7>; + ti,otap-del-sel-legacy = <0x0>; + ti,otap-del-sel-sd-hs = <0x0>; + ti,otap-del-sel-sdr12 = <0xf>; + ti,otap-del-sel-sdr25 = <0xf>; + ti,otap-del-sel-sdr50 = <0xc>; + ti,otap-del-sel-ddr50 = <0x9>; + ti,otap-del-sel-sdr104 = <0x6>; + ti,itap-del-sel-legacy = <0x0>; + ti,itap-del-sel-sd-hs = <0x0>; + ti,itap-del-sel-sdr12 = <0x0>; + ti,itap-del-sel-sdr25 = <0x0>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts index 1773c05f752c..10156a04a92c 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts @@ -410,13 +410,17 @@ &main_i2c2 { }; &sdhci0 { + /* eMMC */ + bootph-all; status = "okay"; + non-removable; ti,driver-strength-ohm = <50>; disable-wp; }; &sdhci1 { /* SD/MMC */ + bootph-all; status = "okay"; vmmc-supply = <&vdd_mmc1>; vqmmc-supply = <&vddshv_sdio>; @@ -424,8 +428,6 @@ &sdhci1 { pinctrl-0 = <&main_mmc1_pins_default>; ti,driver-strength-ohm = <50>; disable-wp; - no-1-8-v; - bootph-all; }; &cpsw3g { -- 2.34.1
