On Tue, Nov 28, 2023 at 5:12 PM Adrian Hunter <adrian.hunter@xxxxxxxxx> wrote:
>
> On 17/11/23 13:31, Victor Shih wrote:
> > From: Victor Shih <victor.shih@xxxxxxxxxxxxxxxxxxx>
> >
> > This is a sdhci version of mmc's set_ios operation.
> > THis is used to handle basic IO bus setting.
> > It covers both UHS-I and UHS-II.
> >
> > Signed-off-by: Ben Chuang <ben.chuang@xxxxxxxxxxxxxxxxxxx>
> > Signed-off-by: AKASHI Takahiro <takahiro.akashi@xxxxxxxxxx>
> > Signed-off-by: Victor Shih <victor.shih@xxxxxxxxxxxxxxxxxxx>
> > ---
> >
> > Updates in V13:
> > - Add judgment condition for power mode in the __sdhci_uhs2_set_ios().
> > - Modify comment message.
> >
> > Updates in V9:
> > - Simplity the turning_on_clk in sdhci_set_ios().
> >
> > Updates in V8:
> > - Add the judgment formula for MMC_TIMING_SPEED_A_HD, MMC_TIMING_SPEED_B
> > and MMC_TIMING_SPEED_B_HD in __sdhci_uhs2_set_ios().
> > - Add the switch case for MMC_TIMING_SPEED_A_HD, MMC_TIMING_SPEED_B
> > and MMC_TIMING_SPEED_B_HD in sdhci_get_preset_value().
> > - mmc_opt_regulator_set_ocr() to instead of mmc_regulator_set_ocr()
> > in sdhci_uhs2_set_ios().
> >
> > Updates in V7:
> > - Remove unnecessary functions.
> >
> > Updates in V6:
> > - Modify return value in some functions.
> > - Remove unnecessary functions.
> >
> > ---
> >
> > drivers/mmc/host/sdhci-uhs2.c | 95 +++++++++++++++++++++++++++++++++++
> > drivers/mmc/host/sdhci-uhs2.h | 1 +
> > drivers/mmc/host/sdhci.c | 55 ++++++++++++--------
> > drivers/mmc/host/sdhci.h | 2 +
> > 4 files changed, 132 insertions(+), 21 deletions(-)
> >
> > diff --git a/drivers/mmc/host/sdhci-uhs2.c b/drivers/mmc/host/sdhci-uhs2.c
> > index 5a79dd29aa38..a55b910f3615 100644
> > --- a/drivers/mmc/host/sdhci-uhs2.c
> > +++ b/drivers/mmc/host/sdhci-uhs2.c
> > @@ -214,6 +214,101 @@ void sdhci_uhs2_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
> > }
> > EXPORT_SYMBOL_GPL(sdhci_uhs2_set_timeout);
> >
> > +/**
> > + * sdhci_uhs2_clear_set_irqs - set Error Interrupt Status Enable register
> > + * @host: SDHCI host
> > + * @clear: bit-wise clear mask
> > + * @set: bit-wise set mask
> > + *
> > + * Set/unset bits in UHS-II Error Interrupt Status Enable register
> > + */
> > +void sdhci_uhs2_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set)
> > +{
> > + u32 ier;
> > +
> > + ier = sdhci_readl(host, SDHCI_UHS2_INT_STATUS_ENABLE);
> > + ier &= ~clear;
> > + ier |= set;
> > + sdhci_writel(host, ier, SDHCI_UHS2_INT_STATUS_ENABLE);
> > + sdhci_writel(host, ier, SDHCI_UHS2_INT_SIGNAL_ENABLE);
> > +}
> > +EXPORT_SYMBOL_GPL(sdhci_uhs2_clear_set_irqs);
> > +
> > +static void __sdhci_uhs2_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> > +{
> > + struct sdhci_host *host = mmc_priv(mmc);
> > + u8 cmd_res, dead_lock;
> > + u16 ctrl_2;
> > +
> > + /* UHS2 Timeout Control */
> > + sdhci_calc_timeout_uhs2(host, &cmd_res, &dead_lock);
> > +
> > + /* change to use calculate value */
> > + cmd_res |= FIELD_PREP(SDHCI_UHS2_TIMER_CTRL_DEADLOCK_MASK, dead_lock);
> > +
> > + sdhci_uhs2_clear_set_irqs(host,
> > + SDHCI_UHS2_INT_CMD_TIMEOUT |
> > + SDHCI_UHS2_INT_DEADLOCK_TIMEOUT,
> > + 0);
> > + sdhci_writeb(host, cmd_res, SDHCI_UHS2_TIMER_CTRL);
> > + sdhci_uhs2_clear_set_irqs(host, 0,
> > + SDHCI_UHS2_INT_CMD_TIMEOUT |
> > + SDHCI_UHS2_INT_DEADLOCK_TIMEOUT);
> > +
> > + /* UHS2 timing. Note, UHS2 timing is disabled when powering off */
> > + ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
> > + if (ios->power_mode != MMC_POWER_OFF &&
> > + (ios->timing == MMC_TIMING_UHS2_SPEED_A ||
> > + ios->timing == MMC_TIMING_UHS2_SPEED_A_HD ||
> > + ios->timing == MMC_TIMING_UHS2_SPEED_B ||
> > + ios->timing == MMC_TIMING_UHS2_SPEED_B_HD))
> > + ctrl_2 |= SDHCI_CTRL_UHS2 | SDHCI_CTRL_UHS2_ENABLE;
> > + else
> > + ctrl_2 &= ~(SDHCI_CTRL_UHS2 | SDHCI_CTRL_UHS2_ENABLE);
> > + sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
> > + host->timing = ios->timing;
> > +
> > + if (!(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN))
> > + sdhci_enable_preset_value(host, true);
> > +
> > + if (host->ops->set_power)
> > + host->ops->set_power(host, ios->power_mode, ios->vdd);
> > + else
> > + sdhci_uhs2_set_power(host, ios->power_mode, ios->vdd);
> > +
> > + sdhci_set_clock(host, host->clock);
> > +}
> > +
> > +static int sdhci_uhs2_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> > +{
> > + struct sdhci_host *host = mmc_priv(mmc);
> > +
> > + pr_debug("%s: clock %uHz powermode %u Vdd %u timing %u\n",
> > + mmc_hostname(mmc), ios->clock, ios->power_mode, ios->vdd, ios->timing);
> > +
> > + if (!sdhci_uhs2_mode(host)) {
> > + sdhci_set_ios(mmc, ios);
> > + return 0;
> > + }
> > +
> > + if (ios->power_mode == MMC_POWER_UNDEFINED)
> > + return 0;
> > +
> > + if (host->flags & SDHCI_DEVICE_DEAD) {
> > + if (ios->power_mode == MMC_POWER_OFF) {
> > + mmc_opt_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
> > + mmc_regulator_set_vqmmc2(mmc, ios);
>
> mmc_regulator_set_vqmmc2() only sets the voltage, it doesn't
> disable the regulator.
>
Hi, Ulf
Would you have any idea about using the mmc_regulator_set_vqmmc2()
to disable the regulator?
Thanks, Victor Shih
> > + }
> > + return -1;
> > + }
> > +
> > + sdhci_set_ios_common(mmc, ios);
> > +
> > + __sdhci_uhs2_set_ios(mmc, ios);
> > +
> > + return 0;
> > +}
> > +
> > /*****************************************************************************\
> > * *
> > * Driver init/exit *
> > diff --git a/drivers/mmc/host/sdhci-uhs2.h b/drivers/mmc/host/sdhci-uhs2.h
> > index ccf4e1834c2d..a3641c5f8c77 100644
> > --- a/drivers/mmc/host/sdhci-uhs2.h
> > +++ b/drivers/mmc/host/sdhci-uhs2.h
> > @@ -181,5 +181,6 @@ void sdhci_uhs2_dump_regs(struct sdhci_host *host);
> > bool sdhci_uhs2_mode(struct sdhci_host *host);
> > void sdhci_uhs2_reset(struct sdhci_host *host, u16 mask);
> > void sdhci_uhs2_set_timeout(struct sdhci_host *host, struct mmc_command *cmd);
> > +void sdhci_uhs2_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set);
> >
> > #endif /* __SDHCI_UHS2_H */
> > diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> > index 4d50cac7717d..64704f6537e0 100644
> > --- a/drivers/mmc/host/sdhci.c
> > +++ b/drivers/mmc/host/sdhci.c
> > @@ -47,8 +47,6 @@
> > static unsigned int debug_quirks = 0;
> > static unsigned int debug_quirks2;
> >
> > -static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable);
> > -
> > static bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd);
> >
> > void sdhci_dumpregs(struct sdhci_host *host)
> > @@ -1877,6 +1875,12 @@ static u16 sdhci_get_preset_value(struct sdhci_host *host)
> > case MMC_TIMING_MMC_HS400:
> > preset = sdhci_readw(host, SDHCI_PRESET_FOR_HS400);
> > break;
> > + case MMC_TIMING_UHS2_SPEED_A:
> > + case MMC_TIMING_UHS2_SPEED_A_HD:
> > + case MMC_TIMING_UHS2_SPEED_B:
> > + case MMC_TIMING_UHS2_SPEED_B_HD:
> > + preset = sdhci_readw(host, SDHCI_PRESET_FOR_UHS2);
> > + break;
> > default:
> > pr_warn("%s: Invalid UHS-I mode selected\n",
> > mmc_hostname(host->mmc));
> > @@ -2323,24 +2327,9 @@ static bool sdhci_presetable_values_change(struct sdhci_host *host, struct mmc_i
> > (sdhci_preset_needed(host, ios->timing) || host->drv_type != ios->drv_type);
> > }
> >
> > -void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> > +void sdhci_set_ios_common(struct mmc_host *mmc, struct mmc_ios *ios)
> > {
> > struct sdhci_host *host = mmc_priv(mmc);
> > - bool reinit_uhs = host->reinit_uhs;
> > - bool turning_on_clk = false;
> > - u8 ctrl;
> > -
> > - host->reinit_uhs = false;
> > -
> > - if (ios->power_mode == MMC_POWER_UNDEFINED)
> > - return;
> > -
> > - if (host->flags & SDHCI_DEVICE_DEAD) {
> > - if (!IS_ERR(mmc->supply.vmmc) &&
> > - ios->power_mode == MMC_POWER_OFF)
> > - mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
> > - return;
> > - }
> >
> > /*
> > * Reset the chip on each power off.
> > @@ -2357,8 +2346,6 @@ void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> > sdhci_enable_preset_value(host, false);
> >
> > if (!ios->clock || ios->clock != host->clock) {
> > - turning_on_clk = ios->clock && !host->clock;
> > -
> > host->ops->set_clock(host, ios->clock);
> > host->clock = ios->clock;
> >
> > @@ -2374,6 +2361,31 @@ void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> > mmc->max_busy_timeout /= host->timeout_clk;
> > }
> > }
> > +}
> > +EXPORT_SYMBOL_GPL(sdhci_set_ios_common);
> > +
> > +void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> > +{
> > + struct sdhci_host *host = mmc_priv(mmc);
> > + bool reinit_uhs = host->reinit_uhs;
> > + bool turning_on_clk;
> > + u8 ctrl;
> > +
> > + host->reinit_uhs = false;
> > +
> > + if (ios->power_mode == MMC_POWER_UNDEFINED)
> > + return;
> > +
> > + if (host->flags & SDHCI_DEVICE_DEAD) {
> > + if (!IS_ERR(mmc->supply.vmmc) &&
> > + ios->power_mode == MMC_POWER_OFF)
> > + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
> > + return;
> > + }
> > +
> > + turning_on_clk = ios->clock != host->clock && ios->clock && !host->clock;
> > +
> > + sdhci_set_ios_common(mmc, ios);
> >
> > if (host->ops->set_power)
> > host->ops->set_power(host, ios->power_mode, ios->vdd);
> > @@ -2958,7 +2970,7 @@ int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
> > }
> > EXPORT_SYMBOL_GPL(sdhci_execute_tuning);
> >
> > -static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable)
> > +void sdhci_enable_preset_value(struct sdhci_host *host, bool enable)
> > {
> > /* Host Controller v3.00 defines preset value registers */
> > if (host->version < SDHCI_SPEC_300)
> > @@ -2986,6 +2998,7 @@ static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable)
> > host->preset_enabled = enable;
> > }
> > }
> > +EXPORT_SYMBOL_GPL(sdhci_enable_preset_value);
> >
> > static void sdhci_post_req(struct mmc_host *mmc, struct mmc_request *mrq,
> > int err)
> > diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> > index cdb418d97c4d..b2e425dfac95 100644
> > --- a/drivers/mmc/host/sdhci.h
> > +++ b/drivers/mmc/host/sdhci.h
> > @@ -848,6 +848,8 @@ void sdhci_reset(struct sdhci_host *host, u8 mask);
> > void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing);
> > int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode);
> > int __sdhci_execute_tuning(struct sdhci_host *host, u32 opcode);
> > +void sdhci_enable_preset_value(struct sdhci_host *host, bool enable);
> > +void sdhci_set_ios_common(struct mmc_host *mmc, struct mmc_ios *ios);
> > void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios);
> > int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
> > struct mmc_ios *ios);
>
