From: Kamal Dasu <kdasu@xxxxxxxxxxxx>
74165b0 shall use a new sdio controller core version which
requires a different reset sequence. For core reset we use
sdhci_reset. For CMD and/or DATA reset added a new function
to also enable SDHCI clocks SDHCI_CLOCK_CARD_EN
SDHCI_CLOCK_INT_EN along with the SDHCI_RESET_CMD and/or
SDHCI_RESET_DATA fields.
Signed-off-by: Kamal Dasu <kdasu@xxxxxxxxxxxx>
---
drivers/mmc/host/sdhci-brcmstb.c | 67 +++++++++++++++++++++++++++++---
1 file changed, 62 insertions(+), 5 deletions(-)
diff --git a/drivers/mmc/host/sdhci-brcmstb.c b/drivers/mmc/host/sdhci-brcmstb.c
index c23251bb95f3..7c5d04be93b3 100644
--- a/drivers/mmc/host/sdhci-brcmstb.c
+++ b/drivers/mmc/host/sdhci-brcmstb.c
@@ -6,6 +6,7 @@
*/
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/mmc/host.h>
#include <linux/module.h>
#include <linux/of.h>
@@ -44,8 +45,13 @@ struct brcmstb_match_priv {
static inline void enable_clock_gating(struct sdhci_host *host)
{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_brcmstb_priv *priv = sdhci_pltfm_priv(pltfm_host);
u32 reg;
+ if (!(priv->flags & BRCMSTB_PRIV_FLAGS_GATE_CLOCK))
+ return;
+
reg = sdhci_readl(host, SDHCI_VENDOR);
reg |= SDHCI_VENDOR_GATE_SDCLK_EN;
sdhci_writel(host, reg, SDHCI_VENDOR);
@@ -53,14 +59,51 @@ static inline void enable_clock_gating(struct sdhci_host *host)
static void brcmstb_reset(struct sdhci_host *host, u8 mask)
{
- struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
- struct sdhci_brcmstb_priv *priv = sdhci_pltfm_priv(pltfm_host);
-
sdhci_and_cqhci_reset(host, mask);
/* Reset will clear this, so re-enable it */
- if (priv->flags & BRCMSTB_PRIV_FLAGS_GATE_CLOCK)
- enable_clock_gating(host);
+ enable_clock_gating(host);
+}
+
+static void brcmstb_sdhci_reset_cmd_data(struct sdhci_host *host, u8 mask)
+{
+ int ret;
+ u32 reg;
+ u32 new_mask = (mask & (SDHCI_RESET_CMD | SDHCI_RESET_DATA)) << 24;
+
+ /*
+ * SDHCI_CLOCK_CONTROL register CARD_EN and CLOCK_INT_EN bits shall
+ * be set along with SOFTWARE_RESET register RESET_CMD or RESET_DATA
+ * bits, hence access SDHCI_CLOCK_CONTROL register as 32-bit register
+ */
+ new_mask |= SDHCI_CLOCK_CARD_EN | SDHCI_CLOCK_INT_EN;
+ reg = sdhci_readl(host, SDHCI_CLOCK_CONTROL);
+ sdhci_writel(host, reg | new_mask, SDHCI_CLOCK_CONTROL);
+
+ reg = sdhci_readb(host, SDHCI_SOFTWARE_RESET);
+ ret = readb_poll_timeout(host->ioaddr + SDHCI_SOFTWARE_RESET,
+ reg, reg & mask, 10, 10000);
+
+ if (ret) {
+ pr_err("%s: Reset 0x%x never completed.\n",
+ mmc_hostname(host->mmc), (int)mask);
+ sdhci_err_stats_inc(host, CTRL_TIMEOUT);
+ sdhci_dumpregs(host);
+ }
+}
+
+static void brcmstb_reset_74165b0(struct sdhci_host *host, u8 mask)
+{
+ /* take care of RESET_ALL as usual */
+ if (mask & SDHCI_RESET_ALL)
+ sdhci_and_cqhci_reset(host, SDHCI_RESET_ALL);
+
+ /* cmd and/or data treated differently on this core */
+ if (mask & (SDHCI_RESET_CMD | SDHCI_RESET_DATA))
+ brcmstb_sdhci_reset_cmd_data(host, mask);
+
+ /* Reset will clear this, so re-enable it */
+ enable_clock_gating(host);
}
static void sdhci_brcmstb_hs400es(struct mmc_host *mmc, struct mmc_ios *ios)
@@ -162,6 +205,13 @@ static struct sdhci_ops sdhci_brcmstb_ops_7216 = {
.set_uhs_signaling = sdhci_brcmstb_set_uhs_signaling,
};
+static struct sdhci_ops sdhci_brcmstb_ops_74165b0 = {
+ .set_clock = sdhci_brcmstb_set_clock,
+ .set_bus_width = sdhci_set_bus_width,
+ .reset = brcmstb_reset_74165b0,
+ .set_uhs_signaling = sdhci_brcmstb_set_uhs_signaling,
+};
+
static struct brcmstb_match_priv match_priv_7425 = {
.flags = BRCMSTB_MATCH_FLAGS_NO_64BIT |
BRCMSTB_MATCH_FLAGS_BROKEN_TIMEOUT,
@@ -179,10 +229,17 @@ static const struct brcmstb_match_priv match_priv_7216 = {
.ops = &sdhci_brcmstb_ops_7216,
};
+static struct brcmstb_match_priv match_priv_74165b0 = {
+ .flags = BRCMSTB_MATCH_FLAGS_HAS_CLOCK_GATE,
+ .hs400es = sdhci_brcmstb_hs400es,
+ .ops = &sdhci_brcmstb_ops_74165b0,
+};
+
static const struct of_device_id __maybe_unused sdhci_brcm_of_match[] = {
{ .compatible = "brcm,bcm7425-sdhci", .data = &match_priv_7425 },
{ .compatible = "brcm,bcm7445-sdhci", .data = &match_priv_7445 },
{ .compatible = "brcm,bcm7216-sdhci", .data = &match_priv_7216 },
+ { .compatible = "brcm,bcm74165b0-sdhci", .data = &match_priv_74165b0 },
{},
};
--
2.17.1
Attachment:
smime.p7s
Description: S/MIME Cryptographic Signature
