Re: [V3, 2/2] mmc: add new sdhci reset sequence for brcm 74165b0

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 9/12/23 18:58, Kamal Dasu wrote:
> From: Kamal Dasu <kdasu@xxxxxxxxxxxx>
> 
> 74165b0 shall use a new sdio controller core version which
> requires a different reset sequence. For core reset we use
> sdhci_reset. For CMD and/or DATA reset added a new function
> to also enable SDCHI clocks SDHCI_CLOCK_CARD_EN

SDCHI -> SDHCI

> SDHCI_CLOCK_INT_EN along with the SDHCI_RESET_CMD and/or
> SDHCI_RESET_DATA fields.
> 
> Signed-off-by: Kamal Dasu <kdasu@xxxxxxxxxxxx>
> Reported-by: kernel test robot <lkp@xxxxxxxxx>
> Closes: https://lore.kernel.org/oe-kbuild-all/202312091608.0VbkRxlh-lkp@xxxxxxxxx/
> Closes:
> https://lore.kernel.org/oe-kbuild-all/202312091905.UGzltx8A-lkp@xxxxxxxxx/``````````````

???

> ---
>  drivers/mmc/host/sdhci-brcmstb.c | 69 +++++++++++++++++++++++++++++---
>  1 file changed, 64 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/mmc/host/sdhci-brcmstb.c b/drivers/mmc/host/sdhci-brcmstb.c
> index c23251bb95f3..d4bd5b3c0fa4 100644
> --- a/drivers/mmc/host/sdhci-brcmstb.c
> +++ b/drivers/mmc/host/sdhci-brcmstb.c
> @@ -44,8 +44,13 @@ struct brcmstb_match_priv {
>  
>  static inline void enable_clock_gating(struct sdhci_host *host)
>  {
> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +	struct sdhci_brcmstb_priv *priv = sdhci_pltfm_priv(pltfm_host);
>  	u32 reg;
>  
> +	if (!(priv->flags & BRCMSTB_PRIV_FLAGS_GATE_CLOCK))
> +		return;
> +
>  	reg = sdhci_readl(host, SDHCI_VENDOR);
>  	reg |= SDHCI_VENDOR_GATE_SDCLK_EN;
>  	sdhci_writel(host, reg, SDHCI_VENDOR);
> @@ -53,14 +58,54 @@ static inline void enable_clock_gating(struct sdhci_host *host)
>  
>  static void brcmstb_reset(struct sdhci_host *host, u8 mask)
>  {
> -	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> -	struct sdhci_brcmstb_priv *priv = sdhci_pltfm_priv(pltfm_host);
> -
>  	sdhci_and_cqhci_reset(host, mask);
>  
>  	/* Reset will clear this, so re-enable it */
> -	if (priv->flags & BRCMSTB_PRIV_FLAGS_GATE_CLOCK)
> -		enable_clock_gating(host);
> +	enable_clock_gating(host);
> +}
> +
> +static void brcmstb_sdhci_reset_cmd_data(struct sdhci_host *host, u8 mask)
> +{
> +	ktime_t timeout;
> +	u32 reg;
> +	u32 new_mask = (mask &  (SDHCI_RESET_CMD | SDHCI_RESET_DATA)) << 24;
> +
> +	new_mask |= SDHCI_CLOCK_CARD_EN | SDHCI_CLOCK_INT_EN;
> +	reg = sdhci_readl(host, SDHCI_CLOCK_CONTROL);

Is it really necessary to write both registers together?  If
so, maybe add a comment.

> +	sdhci_writel(host, reg | new_mask, SDHCI_CLOCK_CONTROL);
> +
> +	/* Wait max 10 ms */
> +	timeout = ktime_add_ms(ktime_get(), 10);
> +
> +	/* hw clears the bit when it's done */
> +	while (1) {
> +		bool timedout = ktime_after(ktime_get(), timeout);
> +
> +		if (!(sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask))
> +			break;
> +		if (timedout) {
> +			pr_err("%s: Reset 0x%x never completed.\n",
> +				mmc_hostname(host->mmc), (int)mask);
> +			sdhci_err_stats_inc(host, CTRL_TIMEOUT);
> +			sdhci_dumpregs(host);
> +			return;
> +		}
> +		udelay(10);
> +	}

For new code we should try to use read_poll_timeout_atomic() or other.

> +}
> +
> +static void brcmstb_reset_74165b0(struct sdhci_host *host, u8 mask)
> +{
> +	/* take care of RESET_ALL as usual */
> +	if (mask & SDHCI_RESET_ALL)
> +		sdhci_and_cqhci_reset(host, SDHCI_RESET_ALL);
> +
> +	/* cmd and/or data treated differently on this core */
> +	if (mask & (SDHCI_RESET_CMD | SDHCI_RESET_DATA))
> +		brcmstb_sdhci_reset_cmd_data(host, mask);
> +
> +	/* Reset will clear this, so re-enable it */
> +	enable_clock_gating(host);
>  }
>  
>  static void sdhci_brcmstb_hs400es(struct mmc_host *mmc, struct mmc_ios *ios)
> @@ -162,6 +207,13 @@ static struct sdhci_ops sdhci_brcmstb_ops_7216 = {
>  	.set_uhs_signaling = sdhci_brcmstb_set_uhs_signaling,
>  };
>  
> +static struct sdhci_ops sdhci_brcmstb_ops_74165b0 = {
> +	.set_clock = sdhci_brcmstb_set_clock,
> +	.set_bus_width = sdhci_set_bus_width,
> +	.reset = brcmstb_reset_74165b0,
> +	.set_uhs_signaling = sdhci_brcmstb_set_uhs_signaling,
> +};
> +
>  static struct brcmstb_match_priv match_priv_7425 = {
>  	.flags = BRCMSTB_MATCH_FLAGS_NO_64BIT |
>  	BRCMSTB_MATCH_FLAGS_BROKEN_TIMEOUT,
> @@ -179,10 +231,17 @@ static const struct brcmstb_match_priv match_priv_7216 = {
>  	.ops = &sdhci_brcmstb_ops_7216,
>  };
>  
> +static struct brcmstb_match_priv match_priv_74165b0 = {
> +	.flags = BRCMSTB_MATCH_FLAGS_HAS_CLOCK_GATE,
> +	.hs400es = sdhci_brcmstb_hs400es,
> +	.ops = &sdhci_brcmstb_ops_74165b0,
> +};
> +
>  static const struct of_device_id __maybe_unused sdhci_brcm_of_match[] = {
>  	{ .compatible = "brcm,bcm7425-sdhci", .data = &match_priv_7425 },
>  	{ .compatible = "brcm,bcm7445-sdhci", .data = &match_priv_7445 },
>  	{ .compatible = "brcm,bcm7216-sdhci", .data = &match_priv_7216 },
> +	{ .compatible = "brcm,bcm74165b0-sdhci", .data = &match_priv_74165b0 },
>  	{},
>  };
>  





[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux