On 30/11/23 11:34:18, Ulf Hansson wrote:
> On Wed, 29 Nov 2023 at 17:05, Jorge Ramirez-Ortiz <jorge@xxxxxxxxxxxx> wrote:
> >
> > On the eMMC SanDisk iNAND 7250 configured with HS200, requesting a
> > re-tune before switching to the RPMB partition would randomly cause
> > subsequent RPMB requests to fail with EILSEQ:
> > * data error -84, tigggered in __mmc_blk_ioctl_cmd()
> >
> > This commit skips the retune when switching to RPMB.
> > Tested over several days with per minute RPMB reads.
>
> This sounds weird to me and needs more testing/debugging in my
> opinion, especially at the host driver level. Perhaps add some new
> tests in mmc_test, that does a partition switch to/from any partition
> and then run regular I/O again to see if the problem is easier to
> reproduce?
hi Uffe
ok I'll have a look - I have never used this driver before, so if you
have anything in the works I'll be glad to integrated and adapt.
>
> The point is, I wonder what is so special with RPMB here? Note that,
> it has been quite common that host drivers/controllers have had issues
> with their tuning support, so I would not be surprised if that is the
> case here too.
Right, it is just that the tuning function for of-arasan is the generic
__sdhci_execute_tuning() - only wrapped around arasan DLL reset
calls. Hence why I aimed for the card: __sdhci_execute_tuning and ZynqMP
are not recent functions or architectures.
> Certainly I would be surprised if the problem is at
> the eMMC card side, but I may be wrong.
How do maintainers test the tuning methods? is there anything else for
me to do other than forcing a retune with different partitions?
>
> Kind regards
> Uffe
For completeness this is the error message - notice that we have a
trusted application (fiovb) going through OP-TEE and back to the TEE
supplicant issuing an rpmb read of a variable (pretty normal these days,
we use it on many different platforms - ST, NXP, AMD/Xilinx, TI..).
The issue on this Zynqmp platform is scarily simple to reproduce; you
can ignore the OP-TEE trace, it is just the TEE way of reporting that
the RPMB read failed.
root@uz3cg-dwg-sec:/var/rootdirs/home/fio# fiovb_printenv m4hash
[ 461.775084] sdhci-arasan ff160000.mmc: __mmc_blk_ioctl_cmd: data error -84
E/TC:? 0
E/TC:? 0 TA panicked with code 0xffff0000
E/LD: Status of TA 22250a54-0bf1-48fe-8002-7b20f1c9c9b1
E/LD: arch: aarch64
E/LD: region 0: va 0xc0004000 pa 0x7e200000 size 0x002000 flags rw-s (ldelf)
E/LD: region 1: va 0xc0006000 pa 0x7e202000 size 0x008000 flags r-xs (ldelf)
E/LD: region 2: va 0xc000e000 pa 0x7e20a000 size 0x001000 flags rw-s (ldelf)
E/LD: region 3: va 0xc000f000 pa 0x7e20b000 size 0x004000 flags rw-s (ldelf)
E/LD: region 4: va 0xc0013000 pa 0x7e20f000 size 0x001000 flags r--s
E/LD: region 5: va 0xc0014000 pa 0x7e22c000 size 0x005000 flags rw-s (stack)
E/LD: region 6: va 0xc0019000 pa 0x816b31fc8 size 0x001000 flags rw-- (param)
E/LD: region 7: va 0xc001a000 pa 0x816aa1fc8 size 0x002000 flags rw-- (param)
E/LD: region 8: va 0xc006b000 pa 0x00001000 size 0x014000 flags r-xs [0]
E/LD: region 9: va 0xc007f000 pa 0x00015000 size 0x008000 flags rw-s [0]
E/LD: [0] 22250a54-0bf1-48fe-8002-7b20f1c9c9b1 @ 0xc006b000
E/LD: Call stack:
E/LD: 0xc006de58
E/LD: 0xc006b388
E/LD: 0xc006ed40
E/LD: 0xc006b624
Read persistent value for m4hash failed: Exec format error
Also I instrumented sdhci-of-arasan.c to confirm that tuning wasn't failing.
diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index 681ac4cab8ab..54cde79d2719 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -1123,7 +1123,10 @@ static int arasan_zynqmp_execute_tuning(struct mmc_host *mmc, u32 opcode)
err = sdhci_execute_tuning(mmc, opcode);
if (err)
- return err;
+ WARN_ON(1);
+
+ if (host->tuning_err)
+ WARN_ON(1);
arasan_zynqmp_dll_reset(host, device_id);
Incidentally - not sure if it is intentional or not - I noticed that the
function arasan_zynqmp_execute_tuning(..) can not fail which seems wrong
(IMO it should also check host->tuning_err and not only err which will
always be 0).
Do you think this needs fixing even though not related to this problem?
TIA
Jorge
>
> >
> > Signed-off-by: Jorge Ramirez-Ortiz <jorge@xxxxxxxxxxxx>
> > ---
> > Fixes v1: kernel test robot identified typo causing build failure
> > CIF_MANFID_SANDISK_SD --> CID_MANFID_SANDISK_SD
> >
> > drivers/mmc/core/block.c | 6 +++++-
> > drivers/mmc/core/card.h | 7 +++++++
> > drivers/mmc/core/quirks.h | 7 +++++++
> > include/linux/mmc/card.h | 1 +
> > 4 files changed, 20 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
> > index 152dfe593c43..9b7ba6562a3b 100644
> > --- a/drivers/mmc/core/block.c
> > +++ b/drivers/mmc/core/block.c
> > @@ -860,6 +860,11 @@ static int mmc_blk_part_switch_pre(struct mmc_card *card,
> > return ret;
> > }
> > mmc_retune_pause(card->host);
> > +
> > + /* Do not force retune before RPMB switch */
> > + if (mmc_can_retune(card->host) &&
> > + mmc_card_broken_rpmb_retune(card))
> > + card->host->need_retune = 0;
> > }
> >
> > return ret;
> > @@ -3143,4 +3148,3 @@ module_exit(mmc_blk_exit);
> >
> > MODULE_LICENSE("GPL");
> > MODULE_DESCRIPTION("Multimedia Card (MMC) block device driver");
> > -
> > diff --git a/drivers/mmc/core/card.h b/drivers/mmc/core/card.h
> > index b7754a1b8d97..1e1555a15de9 100644
> > --- a/drivers/mmc/core/card.h
> > +++ b/drivers/mmc/core/card.h
> > @@ -85,6 +85,7 @@ struct mmc_fixup {
> > #define CID_MANFID_MICRON 0x13
> > #define CID_MANFID_SAMSUNG 0x15
> > #define CID_MANFID_APACER 0x27
> > +#define CID_MANFID_SANDISK2 0x45
> > #define CID_MANFID_KINGSTON 0x70
> > #define CID_MANFID_HYNIX 0x90
> > #define CID_MANFID_KINGSTON_SD 0x9F
> > @@ -284,4 +285,10 @@ static inline int mmc_card_broken_cache_flush(const struct mmc_card *c)
> > {
> > return c->quirks & MMC_QUIRK_BROKEN_CACHE_FLUSH;
> > }
> > +
> > +static inline int mmc_card_broken_rpmb_retune(const struct mmc_card *c)
> > +{
> > + return c->quirks & MMC_QUIRK_BROKEN_RPMB_RETUNE;
> > +}
> > +
> > #endif
> > diff --git a/drivers/mmc/core/quirks.h b/drivers/mmc/core/quirks.h
> > index cca71867bc4a..56c79b6b3537 100644
> > --- a/drivers/mmc/core/quirks.h
> > +++ b/drivers/mmc/core/quirks.h
> > @@ -130,6 +130,13 @@ static const struct mmc_fixup __maybe_unused mmc_blk_fixups[] = {
> > MMC_FIXUP(CID_NAME_ANY, CID_MANFID_SANDISK_SD, 0x5344, add_quirk_sd,
> > MMC_QUIRK_BROKEN_SD_DISCARD),
> >
> > + /*
> > + * SanDisk iNAND 7250 DG4064, this quirk shall disable the retune
> > + * operation enforced by default when switching to RPMB.
> > + */
> > + MMC_FIXUP("DG4064", CID_MANFID_SANDISK2, 0x100, add_quirk_mmc,
> > + MMC_QUIRK_BROKEN_RPMB_RETUNE),
> > +
> > END_FIXUP
> > };
> >
> > diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
> > index 7b12eebc5586..bd6986189e8b 100644
> > --- a/include/linux/mmc/card.h
> > +++ b/include/linux/mmc/card.h
> > @@ -296,6 +296,7 @@ struct mmc_card {
> > #define MMC_QUIRK_BROKEN_SD_DISCARD (1<<14) /* Disable broken SD discard support */
> > #define MMC_QUIRK_BROKEN_SD_CACHE (1<<15) /* Disable broken SD cache support */
> > #define MMC_QUIRK_BROKEN_CACHE_FLUSH (1<<16) /* Don't flush cache until the write has occurred */
> > +#define MMC_QUIRK_BROKEN_RPMB_RETUNE (1<<17) /* Don't force a retune before switching to RPMB */
> >
> > bool written_flag; /* Indicates eMMC has been written since power on */
> > bool reenable_cmdq; /* Re-enable Command Queue */
> > --
> > 2.34.1
