Hi, >> We implemented cmdq feature on Synopsys DesignWare mmc driver. >> The difference between dw_mmc.c and dw_mmc_cqe.c were distinct >> register definitions, mmc user flow and the addition of cmdq. >> >> New version of User Guide had modify mmc driver's usage flow, we may >> need to renew code to precisely follow user guide. >> >> More over, We added a wait status function to satisfy synopsys user >> guide's description, since this flow might be specific in synopsys >> host driver only. >> >> Signed-off-by: Jyan Chou <jyanchou@xxxxxxxxxxx> >> >> —-- >> v6 -> v7: >> - Remove reset-names in driver and adjust reset control's code. >> >> v5 -> v6: >> - Fix linux coding style issues. >> - Drop useless code that is not described in the bindings. >> - Replace devm_clk_get and clk_prepare_enable with devm_clk_get_enabled. >> - Replace EXPORT_SYMBOL with EXPORT_SYMBOL_GPL. >> >> v4 -> v5: >> - Fix linux coding style issues. >> - Fix test robot build errors to make good use of setup_tran_desc >> call back function. >> - Remove useless function. >> >> v3 -> v4: >> - Modify dma mode selection and dma addressing bit to statisfy >> linux coding style. >> >> v1 -> v2: >> - Remove dw_mci_cqe_set_tran_desc due to the duplicated function. >> - Add ->pre_enable() / ->post_disable() >> >> v0 -> v1: >> - Seperate different support into single patch. >> - Fix the compiler complains. >> --- >> --- >> drivers/mmc/host/Kconfig | 13 + >> drivers/mmc/host/Makefile | 1 + >> drivers/mmc/host/dw_mmc_cqe.c | 1467 >> +++++++++++++++++++++++++++++++++ drivers/mmc/host/dw_mmc_cqe.h | >> 456 ++++++++++ >> 4 files changed, 1937 insertions(+) >> create mode 100644 drivers/mmc/host/dw_mmc_cqe.c create mode 100644 >> drivers/mmc/host/dw_mmc_cqe.h >> >> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index >> 58bd5fe4cd25..06bb4de28cc4 100644 >> --- a/drivers/mmc/host/Kconfig >> +++ b/drivers/mmc/host/Kconfig >> @@ -837,6 +837,19 @@ config MMC_DW_STARFIVE >> Synopsys DesignWare Memory Card Interface driver. Select this option >> for platforms based on StarFive JH7110 SoC. >> >> +config MMC_DW_CQE >> + tristate "Synopsys DesignWare Memory Card with CQE Interface" >> + depends on ARC || ARM || ARM64 || MIPS || COMPILE_TEST >> + select MMC_CQHCI >> + help >> + This selects support for the Synopsys DesignWare Mobile Storage IP >> + block after JEDEC Standard version 5.1. Select this option for SD and >> + MMC interfaces that use command queue. > /after/according to/ ? Sorry for asking, what does " /after/according to/ ? " mean ? > Does the hardware actually implement both: SD and MMC CQ? > If so that would be very interesting, but also not currently supported by mmc layer. Since we only had Synopsys eMMC's IP, our hardware only implement MMC CQ, but because we followed Synopsys' data book and user guide, it might probably expand to SD card usage, thanks. Best Regards, Jyan -----Original Message----- From: Christian Loehle <christian.loehle@xxxxxxx> Sent: Monday, November 27, 2023 9:02 PM To: Jyan Chou [周芷安] <jyanchou@xxxxxxxxxxx>; ulf.hansson@xxxxxxxxxx; adrian.hunter@xxxxxxxxx; jh80.chung@xxxxxxxxxxx; riteshh@xxxxxxxxxxxxxx; robh+dt@xxxxxxxxxx; krzysztof.kozlowski+dt@xxxxxxxxxx Cc: conor+dt@xxxxxxxxxx; asutoshd@xxxxxxxxxxxxxx; p.zabel@xxxxxxxxxxxxxx; linux-mmc@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; arnd@xxxxxxxx; briannorris@xxxxxxxxxxxx; doug@xxxxxxxxxxxxx; tonyhuang.sunplus@xxxxxxxxx; abel.vesa@xxxxxxxxxx; william.qiu@xxxxxxxxxxxxxxxx Subject: Re: [PATCH v7][2/4] mmc: Add Synopsys DesignWare mmc cmdq host driver External mail. On 21/11/2023 09:10, Jyan Chou wrote: > We implemented cmdq feature on Synopsys DesignWare mmc driver. > The difference between dw_mmc.c and dw_mmc_cqe.c were distinct > register definitions, mmc user flow and the addition of cmdq. > > New version of User Guide had modify mmc driver's usage flow, we may > need to renew code to precisely follow user guide. > > More over, We added a wait status function to satisfy synopsys user > guide's description, since this flow might be specific in synopsys > host driver only. > > Signed-off-by: Jyan Chou <jyanchou@xxxxxxxxxxx> > > —-- > v6 -> v7: > - Remove reset-names in driver and adjust reset control's code. > > v5 -> v6: > - Fix linux coding style issues. > - Drop useless code that is not described in the bindings. > - Replace devm_clk_get and clk_prepare_enable with devm_clk_get_enabled. > - Replace EXPORT_SYMBOL with EXPORT_SYMBOL_GPL. > > v4 -> v5: > - Fix linux coding style issues. > - Fix test robot build errors to make good use of setup_tran_desc > call back function. > - Remove useless function. > > v3 -> v4: > - Modify dma mode selection and dma addressing bit to statisfy > linux coding style. > > v1 -> v2: > - Remove dw_mci_cqe_set_tran_desc due to the duplicated function. > - Add ->pre_enable() / ->post_disable() > > v0 -> v1: > - Seperate different support into single patch. > - Fix the compiler complains. > --- > --- > drivers/mmc/host/Kconfig | 13 + > drivers/mmc/host/Makefile | 1 + > drivers/mmc/host/dw_mmc_cqe.c | 1467 > +++++++++++++++++++++++++++++++++ drivers/mmc/host/dw_mmc_cqe.h | > 456 ++++++++++ > 4 files changed, 1937 insertions(+) > create mode 100644 drivers/mmc/host/dw_mmc_cqe.c create mode 100644 > drivers/mmc/host/dw_mmc_cqe.h > > diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index > 58bd5fe4cd25..06bb4de28cc4 100644 > --- a/drivers/mmc/host/Kconfig > +++ b/drivers/mmc/host/Kconfig > @@ -837,6 +837,19 @@ config MMC_DW_STARFIVE > Synopsys DesignWare Memory Card Interface driver. Select this option > for platforms based on StarFive JH7110 SoC. > > +config MMC_DW_CQE > + tristate "Synopsys DesignWare Memory Card with CQE Interface" > + depends on ARC || ARM || ARM64 || MIPS || COMPILE_TEST > + select MMC_CQHCI > + help > + This selects support for the Synopsys DesignWare Mobile Storage IP > + block after JEDEC Standard version 5.1. Select this option for SD and > + MMC interfaces that use command queue. /after/according to/ ? Does the hardware actually implement both: SD and MMC CQ? If so that would be very interesting, but also not currently supported by mmc layer.
