Re: [PATCH V12 13/23] mmc: sdhci-uhs2: add set_timeout()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Oct 3, 2023 at 6:55 PM Ulf Hansson <ulf.hansson@xxxxxxxxxx> wrote:
>
> On Fri, 15 Sept 2023 at 11:44, Victor Shih <victorshihgli@xxxxxxxxx> wrote:
> >
> > From: Victor Shih <victor.shih@xxxxxxxxxxxxxxxxxxx>
> >
> > This is a UHS-II version of sdhci's set_timeout() operation.
>
> This needs more explanations and justifications.
>
> Other than that, the patch looks good to me!
>
> Kind regards
> Uffe
>

Hi, Ulf

I will try to update this in version 13.

Thanks, Victor Shih

> >
> > Signed-off-by: Ben Chuang <ben.chuang@xxxxxxxxxxxxxxxxxxx>
> > Signed-off-by: AKASHI Takahiro <takahiro.akashi@xxxxxxxxxx>
> > Signed-off-by: Victor Shih <victor.shih@xxxxxxxxxxxxxxxxxxx>
> > Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
> > ---
> >
> > Updates in V8:
> >  - Initialization be combined with declaration and realigned
> >    in sdhci_calc_timeout_uhs2().
> >  - Forward declare struct mmc_command in sdhci_uhs2.h.
> >
> > Updates in V6:
> >  - Use GENMASK() and FIELD_PREP() in some case.
> >  - Use sdhci_uhs2_mode() to simplify code.
> >  - Remove unnecessary functions.
> >
> > ---
> >
> >  drivers/mmc/host/sdhci-uhs2.c | 72 +++++++++++++++++++++++++++++++++++
> >  drivers/mmc/host/sdhci-uhs2.h |  2 +
> >  2 files changed, 74 insertions(+)
> >
> > diff --git a/drivers/mmc/host/sdhci-uhs2.c b/drivers/mmc/host/sdhci-uhs2.c
> > index 92fb69b7e209..d519e6ce6199 100644
> > --- a/drivers/mmc/host/sdhci-uhs2.c
> > +++ b/drivers/mmc/host/sdhci-uhs2.c
> > @@ -13,6 +13,7 @@
> >  #include <linux/delay.h>
> >  #include <linux/module.h>
> >  #include <linux/iopoll.h>
> > +#include <linux/bitfield.h>
> >
> >  #include "sdhci.h"
> >  #include "sdhci-uhs2.h"
> > @@ -142,6 +143,77 @@ static void sdhci_uhs2_set_power(struct sdhci_host *host, unsigned char mode, un
> >         }
> >  }
> >
> > +static u8 sdhci_calc_timeout_uhs2(struct sdhci_host *host, u8 *cmd_res, u8 *dead_lock)
> > +{
> > +       /* timeout in us */
> > +       unsigned int dead_lock_timeout = 1 * 1000 * 1000;
> > +       unsigned int cmd_res_timeout = 5 * 1000;
> > +       unsigned int current_timeout;
> > +       u8 count;
> > +
> > +       /*
> > +        * Figure out needed cycles.
> > +        * We do this in steps in order to fit inside a 32 bit int.
> > +        * The first step is the minimum timeout, which will have a
> > +        * minimum resolution of 6 bits:
> > +        * (1) 2^13*1000 > 2^22,
> > +        * (2) host->timeout_clk < 2^16
> > +        *     =>
> > +        *     (1) / (2) > 2^6
> > +        */
> > +       count = 0;
> > +       current_timeout = (1 << 13) * 1000 / host->timeout_clk;
> > +       while (current_timeout < cmd_res_timeout) {
> > +               count++;
> > +               current_timeout <<= 1;
> > +               if (count >= 0xF)
> > +                       break;
> > +       }
> > +
> > +       if (count >= 0xF) {
> > +               DBG("%s: Too large timeout 0x%x requested for CMD_RES!\n",
> > +                   mmc_hostname(host->mmc), count);
> > +               count = 0xE;
> > +       }
> > +       *cmd_res = count;
> > +
> > +       count = 0;
> > +       current_timeout = (1 << 13) * 1000 / host->timeout_clk;
> > +       while (current_timeout < dead_lock_timeout) {
> > +               count++;
> > +               current_timeout <<= 1;
> > +               if (count >= 0xF)
> > +                       break;
> > +       }
> > +
> > +       if (count >= 0xF) {
> > +               DBG("%s: Too large timeout 0x%x requested for DEADLOCK!\n",
> > +                   mmc_hostname(host->mmc), count);
> > +               count = 0xE;
> > +       }
> > +       *dead_lock = count;
> > +
> > +       return count;
> > +}
> > +
> > +static void __sdhci_uhs2_set_timeout(struct sdhci_host *host)
> > +{
> > +       u8 cmd_res, dead_lock;
> > +
> > +       sdhci_calc_timeout_uhs2(host, &cmd_res, &dead_lock);
> > +       cmd_res |= FIELD_PREP(SDHCI_UHS2_TIMER_CTRL_DEADLOCK_MASK, dead_lock);
> > +       sdhci_writeb(host, cmd_res, SDHCI_UHS2_TIMER_CTRL);
> > +}
> > +
> > +void sdhci_uhs2_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
> > +{
> > +       __sdhci_set_timeout(host, cmd);
> > +
> > +       if (sdhci_uhs2_mode(host))
> > +               __sdhci_uhs2_set_timeout(host);
> > +}
> > +EXPORT_SYMBOL_GPL(sdhci_uhs2_set_timeout);
> > +
> >  /*****************************************************************************\
> >   *                                                                           *
> >   * MMC callbacks                                                             *
> > diff --git a/drivers/mmc/host/sdhci-uhs2.h b/drivers/mmc/host/sdhci-uhs2.h
> > index 8253d50f7852..ccf4e1834c2d 100644
> > --- a/drivers/mmc/host/sdhci-uhs2.h
> > +++ b/drivers/mmc/host/sdhci-uhs2.h
> > @@ -175,9 +175,11 @@
> >  #define SDHCI_UHS2_VENDOR_PTR                  0xE8
> >
> >  struct sdhci_host;
> > +struct mmc_command;
> >
> >  void sdhci_uhs2_dump_regs(struct sdhci_host *host);
> >  bool sdhci_uhs2_mode(struct sdhci_host *host);
> >  void sdhci_uhs2_reset(struct sdhci_host *host, u16 mask);
> > +void sdhci_uhs2_set_timeout(struct sdhci_host *host, struct mmc_command *cmd);
> >
> >  #endif /* __SDHCI_UHS2_H */
> > --
> > 2.25.1
> >





[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux