Re: [PATCH v1] mmc: mtk-sd: Use readl_poll_timeout_atomic in msdc_reset_hw

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 22 Sept 2023 at 11:54, Pablo Sun <pablo.sun@xxxxxxxxxxxx> wrote:
>
> Use atomic readl_poll_timeout_atomic, because msdc_reset_hw
> may be invoked in IRQ handler in the following context:
>
>   msdc_irq() -> msdc_cmd_done() -> msdc_reset_hw()
>
> The following kernel BUG stack trace can be observed on
> Genio 1200 EVK after initializing MSDC1 hardware during kernel boot:
>
> [    1.187441] BUG: scheduling while atomic: swapper/0/0/0x00010002
> [    1.189157] Modules linked in:
> [    1.204633] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W         5.15.42-mtk+modified #1
> [    1.205713] Hardware name: MediaTek Genio 1200 EVK-P1V2-EMMC (DT)
> [    1.206484] Call trace:
> [    1.206796]  dump_backtrace+0x0/0x1ac
> [    1.207266]  show_stack+0x24/0x30
> [    1.207692]  dump_stack_lvl+0x68/0x84
> [    1.208162]  dump_stack+0x1c/0x38
> [    1.208587]  __schedule_bug+0x68/0x80
> [    1.209056]  __schedule+0x6ec/0x7c0
> [    1.209502]  schedule+0x7c/0x110
> [    1.209915]  schedule_hrtimeout_range_clock+0xc4/0x1f0
> [    1.210569]  schedule_hrtimeout_range+0x20/0x30
> [    1.211148]  usleep_range_state+0x84/0xc0
> [    1.211661]  msdc_reset_hw+0xc8/0x1b0
> [    1.212134]  msdc_cmd_done.isra.0+0x4ac/0x5f0
> [    1.212693]  msdc_irq+0x104/0x2d4
> [    1.213121]  __handle_irq_event_percpu+0x68/0x280
> [    1.213725]  handle_irq_event+0x70/0x15c
> [    1.214230]  handle_fasteoi_irq+0xb0/0x1a4
> [    1.214755]  handle_domain_irq+0x6c/0x9c
> [    1.215260]  gic_handle_irq+0xc4/0x180
> [    1.215741]  call_on_irq_stack+0x2c/0x54
> [    1.216245]  do_interrupt_handler+0x5c/0x70
> [    1.216782]  el1_interrupt+0x30/0x80
> [    1.217242]  el1h_64_irq_handler+0x1c/0x2c
> [    1.217769]  el1h_64_irq+0x78/0x7c
> [    1.218206]  cpuidle_enter_state+0xc8/0x600
> [    1.218744]  cpuidle_enter+0x44/0x5c
> [    1.219205]  do_idle+0x224/0x2d0
> [    1.219624]  cpu_startup_entry+0x30/0x80
> [    1.220129]  rest_init+0x108/0x134
> [    1.220568]  arch_call_rest_init+0x1c/0x28
> [    1.221094]  start_kernel+0x6c0/0x700
> [    1.221564]  __primary_switched+0xc0/0xc8
>
> Fixes: ffaea6ebfe9c ("mmc: mtk-sd: Use readl_poll_timeout instead of open-coded polling")
> Signed-off-by: Pablo Sun <pablo.sun@xxxxxxxxxxxx>

Applied for fixes and by adding a stable tag, thanks!

Kind regards
Uffe


> ---
>  drivers/mmc/host/mtk-sd.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
> index 5392200cfdf7..97f7c3d4be6e 100644
> --- a/drivers/mmc/host/mtk-sd.c
> +++ b/drivers/mmc/host/mtk-sd.c
> @@ -669,11 +669,11 @@ static void msdc_reset_hw(struct msdc_host *host)
>         u32 val;
>
>         sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_RST);
> -       readl_poll_timeout(host->base + MSDC_CFG, val, !(val & MSDC_CFG_RST), 0, 0);
> +       readl_poll_timeout_atomic(host->base + MSDC_CFG, val, !(val & MSDC_CFG_RST), 0, 0);
>
>         sdr_set_bits(host->base + MSDC_FIFOCS, MSDC_FIFOCS_CLR);
> -       readl_poll_timeout(host->base + MSDC_FIFOCS, val,
> -                          !(val & MSDC_FIFOCS_CLR), 0, 0);
> +       readl_poll_timeout_atomic(host->base + MSDC_FIFOCS, val,
> +                                 !(val & MSDC_FIFOCS_CLR), 0, 0);
>
>         val = readl(host->base + MSDC_INT);
>         writel(val, host->base + MSDC_INT);
> --
> 2.18.0
>



[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux