On Tue, 12 Sept 2023 at 11:17, Victor Shih <victorshihgli@xxxxxxxxx> wrote:
>
> From: Victor Shih <victor.shih@xxxxxxxxxxxxxxxxxxx>
>
> When GL9750 enters ASPM L1 sub-states, it will stay at L1.1 and will not
> enter L1.2. The workaround is to toggle PM state to allow GL9750 to enter
> ASPM L1.2.
>
> Signed-off-by: Victor Shih <victor.shih@xxxxxxxxxxxxxxxxxxx>
Applied for next, thanks!
Kind regards
Uffe
> ---
> drivers/mmc/host/sdhci-pci-gli.c | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
> index ae8c307b7aa7..dd6f09024f08 100644
> --- a/drivers/mmc/host/sdhci-pci-gli.c
> +++ b/drivers/mmc/host/sdhci-pci-gli.c
> @@ -25,6 +25,9 @@
> #define GLI_9750_WT_EN_ON 0x1
> #define GLI_9750_WT_EN_OFF 0x0
>
> +#define PCI_GLI_9750_PM_CTRL 0xFC
> +#define PCI_GLI_9750_PM_STATE GENMASK(1, 0)
> +
> #define SDHCI_GLI_9750_CFG2 0x848
> #define SDHCI_GLI_9750_CFG2_L1DLY GENMASK(28, 24)
> #define GLI_9750_CFG2_L1DLY_VALUE 0x1F
> @@ -536,8 +539,12 @@ static void sdhci_gl9750_set_clock(struct sdhci_host *host, unsigned int clock)
>
> static void gl9750_hw_setting(struct sdhci_host *host)
> {
> + struct sdhci_pci_slot *slot = sdhci_priv(host);
> + struct pci_dev *pdev;
> u32 value;
>
> + pdev = slot->chip->pdev;
> +
> gl9750_wt_on(host);
>
> value = sdhci_readl(host, SDHCI_GLI_9750_CFG2);
> @@ -547,6 +554,13 @@ static void gl9750_hw_setting(struct sdhci_host *host)
> GLI_9750_CFG2_L1DLY_VALUE);
> sdhci_writel(host, value, SDHCI_GLI_9750_CFG2);
>
> + /* toggle PM state to allow GL9750 to enter ASPM L1.2 */
> + pci_read_config_dword(pdev, PCI_GLI_9750_PM_CTRL, &value);
> + value |= PCI_GLI_9750_PM_STATE;
> + pci_write_config_dword(pdev, PCI_GLI_9750_PM_CTRL, value);
> + value &= ~PCI_GLI_9750_PM_STATE;
> + pci_write_config_dword(pdev, PCI_GLI_9750_PM_CTRL, value);
> +
> gl9750_wt_off(host);
> }
>
> --
> 2.25.1
>
