On 2023/9/12 21:23, Emil Renner Berthing wrote:
> William Qiu wrote:
>> Drop unused properties and limit cclk_in to 50M, thus cancelling the
>> internal frequency and adopting the by-pass mode.
>
> That's two unrelated changes which should really be in different patches. But
> again the hardware still has the relevant field in the syscon registers even if
> the driver doesn't use it, so maybe just leave them and just keep this patch
> adding the assigned-clock* properties.
>
> /Emil
>
>>
Will update.
Best Regards,
William
>> Signed-off-by: William Qiu <william.qiu@xxxxxxxxxxxxxxxx>
>> ---
>> .../riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi | 4 ++++
>> arch/riscv/boot/dts/starfive/jh7110.dtsi | 2 --
>> 2 files changed, 4 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
>> index d79f94432b27..d1f2ec308bca 100644
>> --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
>> +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
>> @@ -205,6 +205,8 @@ &i2c6 {
>>
>> &mmc0 {
>> max-frequency = <100000000>;
>> + assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO0_SDCARD>;
>> + assigned-clock-rates = <50000000>;
>> bus-width = <8>;
>> cap-mmc-highspeed;
>> mmc-ddr-1_8v;
>> @@ -221,6 +223,8 @@ &mmc0 {
>>
>> &mmc1 {
>> max-frequency = <100000000>;
>> + assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO1_SDCARD>;
>> + assigned-clock-rates = <50000000>;
>> bus-width = <4>;
>> no-sdio;
>> no-mmc;
>> diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
>> index e85464c328d0..7b8e841aeef8 100644
>> --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
>> +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
>> @@ -870,7 +870,6 @@ mmc0: mmc@16010000 {
>> fifo-depth = <32>;
>> fifo-watermark-aligned;
>> data-addr = <0>;
>> - starfive,sysreg = <&sys_syscon 0x14 0x1a 0x7c000000>;
>> status = "disabled";
>> };
>>
>> @@ -886,7 +885,6 @@ mmc1: mmc@16020000 {
>> fifo-depth = <32>;
>> fifo-watermark-aligned;
>> data-addr = <0>;
>> - starfive,sysreg = <&sys_syscon 0x9c 0x1 0x3e>;
>> status = "disabled";
>> };
>>
>> --
>> 2.34.1
>>
>>
>> _______________________________________________
>> linux-riscv mailing list
>> linux-riscv@xxxxxxxxxxxxxxxxxxx
>> http://lists.infradead.org/mailman/listinfo/linux-riscv
