[PATCH 29/37] dt-bindings: pinctrl: renesas: document RZ/G3S SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>

Add documentation for pin controller found on RZ/G3S (R9A08G045) SoC.
Compared with RZ/G2{L,UL} RZ/G3S has 82 general-purpose IOs, no slew
rate and output impedance support and more values for drive strength
which needs to be expressed in microamp.

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
---
 .../pinctrl/renesas,rzg2l-pinctrl.yaml        | 26 +++++++++++++++----
 1 file changed, 21 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
index 145c5442f268..079e5be69330 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
@@ -25,6 +25,7 @@ properties:
           - enum:
               - renesas,r9a07g043-pinctrl # RZ/G2UL{Type-1,Type-2} and RZ/Five
               - renesas,r9a07g044-pinctrl # RZ/G2{L,LC}
+              - renesas,r9a08g045-pinctrl # RZ/G3S
 
       - items:
           - enum:
@@ -77,6 +78,26 @@ additionalProperties:
         - $ref: pincfg-node.yaml#
         - $ref: pinmux-node.yaml#
 
+        - if:
+            properties:
+              compatible:
+                contains:
+                  enum:
+                    - renesas,r9a08g045-pinctrl
+          then:
+            properties:
+              drive-strength-microamp:
+                enum: [ 1900, 2200, 4000, 4400, 4500, 4700, 5200, 5300, 5700,
+                        5800, 6000, 6050, 6100, 6550, 6800, 7000, 8000, 9000,
+                        10000 ]
+          else:
+            properties:
+              drive-strength:
+                enum: [ 2, 4, 8, 12 ]
+              output-impedance-ohms:
+                enum: [ 33, 50, 66, 100 ]
+              slew-rate: true
+
       description:
         Pin controller client devices use pin configuration subnodes (children
         and grandchildren) for desired pin configuration.
@@ -89,14 +110,9 @@ additionalProperties:
             alternate function configuration number using the RZG2L_PORT_PINMUX()
             helper macro in <dt-bindings/pinctrl/rzg2l-pinctrl.h>.
         pins: true
-        drive-strength:
-          enum: [ 2, 4, 8, 12 ]
-        output-impedance-ohms:
-          enum: [ 33, 50, 66, 100 ]
         power-source:
           description: I/O voltage in millivolt.
           enum: [ 1800, 2500, 3300 ]
-        slew-rate: true
         gpio-hog: true
         gpios: true
         input-enable: true
-- 
2.39.2




[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux