Re: [PATCH V10 20/23] mmc: sdhci-uhs2: add add_host() and others to set up the driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Aug 31, 2023 at 4:35 PM Adrian Hunter <adrian.hunter@xxxxxxxxx> wrote:
>
> On 18/08/23 13:02, Victor Shih wrote:
> > From: Victor Shih <victor.shih@xxxxxxxxxxxxxxxxxxx>
> >
> > This is a UHS-II version of sdhci's add_host/remove_host operation.
> > Any sdhci drivers which are capable of handling UHS-II cards must
> > call those functions instead of the corresponding sdhci's.
> >
> > Signed-off-by: Ben Chuang <ben.chuang@xxxxxxxxxxxxxxxxxxx>
> > Signed-off-by: AKASHI Takahiro <takahiro.akashi@xxxxxxxxxx>
> > Signed-off-by: Victor Shih <victor.shih@xxxxxxxxxxxxxxxxxxx>
> > ---
> >
> > Updates in V10:
> >  - Move some definitions of PatchV9[05/23] to PatchV10[20/23].
> >
> > Updates in V8:
> >  - Change return type to void for __sdhci_uhs2_add_host_v4().
> >  - Remove unused variables in __sdhci_uhs2_add_host_v4().
> >
> > Updates in V7:
> >  - __sdhci_add_host() to instead of __sdhci_uhs2_add_host()
> >    in sdhci_uhs2_add_host().
> >  - Cancel export state of some functions.
> >
> > Updates in V6:
> >  - Add complete_work_fn/thread_irq_fn variables in struct sdhci_host.
> >  - Use complete_work_fn/thread_irq_fn variables in
> >    sdhci_alloc_host() and sdhci_uhs2_add_host().
> >  - Use sdhci_uhs2_mode() to simplify code in __sdhci_uhs2_remove_host().
> >
> > ---
> >
> >  drivers/mmc/host/sdhci-uhs2.c | 102 ++++++++++++++++++++++++++++++++++
> >  drivers/mmc/host/sdhci-uhs2.h |   2 +
> >  drivers/mmc/host/sdhci.c      |   7 ++-
> >  drivers/mmc/host/sdhci.h      |   3 +
> >  include/linux/mmc/host.h      |   1 +
> >  5 files changed, 113 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/mmc/host/sdhci-uhs2.c b/drivers/mmc/host/sdhci-uhs2.c
> > index 8d1be670af49..80eafacc8b9f 100644
> > --- a/drivers/mmc/host/sdhci-uhs2.c
> > +++ b/drivers/mmc/host/sdhci-uhs2.c
> > @@ -16,6 +16,7 @@
> >  #include <linux/bitfield.h>
> >  #include <linux/mmc/mmc.h>
> >  #include <linux/mmc/host.h>
> > +#include <linux/regulator/consumer.h>
> >
> >  #include "sdhci.h"
> >  #include "sdhci-uhs2.h"
> > @@ -997,6 +998,107 @@ static irqreturn_t sdhci_uhs2_thread_irq(int irq, void *dev_id)
> >       return IRQ_HANDLED;
> >  }
> >
> > +/*****************************************************************************\
> > + *
> > + * Device allocation/registration                                            *
> > + *                                                                           *
> > +\*****************************************************************************/
> > +
> > +static void __sdhci_uhs2_add_host_v4(struct sdhci_host *host, u32 caps1)
> > +{
> > +     struct mmc_host *mmc;
> > +     u32 max_current_caps2;
> > +
> > +     mmc = host->mmc;
> > +
> > +     /* Support UHS2 */
> > +     if (caps1 & SDHCI_SUPPORT_UHS2)
> > +             mmc->caps2 |= MMC_CAP2_SD_UHS2;
> > +
> > +     max_current_caps2 = sdhci_readl(host, SDHCI_MAX_CURRENT_1);
> > +
> > +     if ((caps1 & SDHCI_CAN_VDD2_180) &&
> > +         !max_current_caps2 &&
> > +         !IS_ERR(mmc->supply.vmmc2)) {
> > +             /* UHS2 - VDD2 */
> > +             int curr = regulator_get_current_limit(mmc->supply.vmmc2);
> > +
> > +             if (curr > 0) {
> > +                     /* convert to SDHCI_MAX_CURRENT format */
> > +                     curr = curr / 1000;  /* convert to mA */
> > +                     curr = curr / SDHCI_MAX_CURRENT_MULTIPLIER;
> > +                     curr = min_t(u32, curr, SDHCI_MAX_CURRENT_LIMIT);
> > +                     max_current_caps2 = curr;
> > +             }
> > +     }
> > +
> > +     if (caps1 & SDHCI_CAN_VDD2_180)
> > +             mmc->ocr_avail_uhs2 |= MMC_VDD_165_195;
> > +     else
> > +             mmc->caps2 &= ~MMC_CAP2_SD_UHS2;
> > +}
> > +
> > +static int sdhci_uhs2_host_ops_init(struct sdhci_host *host);
> > +
> > +static void __sdhci_uhs2_remove_host(struct sdhci_host *host, int dead)
> > +{
> > +     if (!sdhci_uhs2_mode(host))
> > +             return;
> > +
> > +     if (!dead)
> > +             sdhci_uhs2_reset(host, SDHCI_UHS2_SW_RESET_FULL);
> > +}
> > +
> > +int sdhci_uhs2_add_host(struct sdhci_host *host)
> > +{
> > +     struct mmc_host *mmc = host->mmc;
> > +     int ret;
> > +
> > +     ret = sdhci_setup_host(host);
> > +     if (ret)
> > +             return ret;
> > +
> > +     if (host->version >= SDHCI_SPEC_400)
> > +             __sdhci_uhs2_add_host_v4(host, host->caps1);
> > +
> > +     if ((mmc->caps2 & MMC_CAP2_SD_UHS2) && !host->v4_mode)
> > +             /* host doesn't want to enable UHS2 support */
> > +             mmc->caps2 &= ~MMC_CAP2_SD_UHS2;
> > +
> > +     /* overwrite ops */
> > +     if (mmc->caps2 & MMC_CAP2_SD_UHS2)
> > +             sdhci_uhs2_host_ops_init(host);
> > +
> > +     host->complete_work_fn = sdhci_uhs2_complete_work;
> > +     host->thread_irq_fn    = sdhci_uhs2_thread_irq;
> > +
> > +     /* LED support not implemented for UHS2 */
> > +     host->quirks |= SDHCI_QUIRK_NO_LED;
> > +
> > +     ret = __sdhci_add_host(host);
> > +     if (ret)
> > +             goto cleanup;
> > +
> > +     return 0;
> > +
> > +cleanup:
> > +     if (host->version >= SDHCI_SPEC_400)
> > +             __sdhci_uhs2_remove_host(host, 0);
> > +
> > +     sdhci_cleanup_host(host);
> > +
> > +     return ret;
> > +}
> > +EXPORT_SYMBOL_GPL(sdhci_uhs2_add_host);
> > +
> > +void sdhci_uhs2_remove_host(struct sdhci_host *host, int dead)
> > +{
> > +     __sdhci_uhs2_remove_host(host, dead);
> > +
> > +     sdhci_remove_host(host, dead);
> > +}
> > +EXPORT_SYMBOL_GPL(sdhci_uhs2_remove_host);
> > +
> >  void sdhci_uhs2_request(struct mmc_host *mmc, struct mmc_request *mrq)
> >  {
> >       struct sdhci_host *host = mmc_priv(mmc);
> > diff --git a/drivers/mmc/host/sdhci-uhs2.h b/drivers/mmc/host/sdhci-uhs2.h
> > index 3aa2cb4b39d6..bd5aae054c6f 100644
> > --- a/drivers/mmc/host/sdhci-uhs2.h
> > +++ b/drivers/mmc/host/sdhci-uhs2.h
> > @@ -186,5 +186,7 @@ void sdhci_uhs2_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set);
> >  void sdhci_uhs2_request(struct mmc_host *mmc, struct mmc_request *mrq);
> >  int sdhci_uhs2_request_atomic(struct mmc_host *mmc, struct mmc_request *mrq);
> >  u32 sdhci_uhs2_irq(struct sdhci_host *host, u32 intmask);
> > +int sdhci_uhs2_add_host(struct sdhci_host *host);
> > +void sdhci_uhs2_remove_host(struct sdhci_host *host, int dead);
> >
> >  #endif /* __SDHCI_UHS2_H */
> > diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> > index 318d4830732f..b3de7e30ba54 100644
> > --- a/drivers/mmc/host/sdhci.c
> > +++ b/drivers/mmc/host/sdhci.c
> > @@ -4104,6 +4104,9 @@ struct sdhci_host *sdhci_alloc_host(struct device *dev,
> >
> >       host->max_timeout_count = 0xE;
> >
> > +     host->complete_work_fn = sdhci_complete_work;
> > +     host->thread_irq_fn    = sdhci_thread_irq;
> > +
> >       return host;
> >  }
> >
> > @@ -4853,7 +4856,7 @@ int __sdhci_add_host(struct sdhci_host *host)
> >       if (!host->complete_wq)
> >               return -ENOMEM;
> >
> > -     INIT_WORK(&host->complete_work, sdhci_complete_work);
> > +     INIT_WORK(&host->complete_work, host->complete_work_fn);
> >
> >       timer_setup(&host->timer, sdhci_timeout_timer, 0);
> >       timer_setup(&host->data_timer, sdhci_timeout_data_timer, 0);
> > @@ -4862,7 +4865,7 @@ int __sdhci_add_host(struct sdhci_host *host)
> >
> >       sdhci_init(host, 0);
> >
> > -     ret = request_threaded_irq(host->irq, sdhci_irq, sdhci_thread_irq,
> > +     ret = request_threaded_irq(host->irq, sdhci_irq, host->thread_irq_fn,
> >                                  IRQF_SHARED, mmc_hostname(mmc), host);
> >       if (ret) {
> >               pr_err("%s: Failed to request IRQ %d: %d\n",
> > diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> > index 6bbb9f073f29..5235f2da6568 100644
> > --- a/drivers/mmc/host/sdhci.h
> > +++ b/drivers/mmc/host/sdhci.h
> > @@ -626,6 +626,9 @@ struct sdhci_host {
> >       struct timer_list timer;        /* Timer for timeouts */
> >       struct timer_list data_timer;   /* Timer for data timeouts */
> >
> > +     void            (*complete_work_fn)(struct work_struct *work);
> > +     irqreturn_t     (*thread_irq_fn)(int irq, void *dev_id);
> > +
> >  #if IS_ENABLED(CONFIG_MMC_SDHCI_EXTERNAL_DMA)
> >       struct dma_chan *rx_chan;
> >       struct dma_chan *tx_chan;
> > diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
> > index 1eba64228725..918d4998c1de 100644
> > --- a/include/linux/mmc/host.h
> > +++ b/include/linux/mmc/host.h
> > @@ -379,6 +379,7 @@ struct mmc_host {
> >       u32                     ocr_avail_sdio; /* SDIO-specific OCR */
> >       u32                     ocr_avail_sd;   /* SD-specific OCR */
> >       u32                     ocr_avail_mmc;  /* MMC-specific OCR */
> > +     u32                     ocr_avail_uhs2; /* UHS2-specific OCR */
>
> ocr_avail_uhs2 gets set but doesn't seem to be used
>

Hi, Adrian

I will drop the ocr_avail_uhs2 in the next version.

Thanks, Victor Shih

> >       struct wakeup_source    *ws;            /* Enable consume of uevents */
> >       u32                     max_current_330;
> >       u32                     max_current_300;
>




[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux