From: Haibo Chen <haibo.chen@xxxxxxx>
tuning only support in 4-bit mode or 8 bit mode, so in 1-bit mode,
need to hold retuning.
Find this issue when use manual tuning method on imx93. When system
resume back, SDIO WIFI try to switch back to 4 bit mode, first will
trigger retuning, and all tuning command failed.
Signed-off-by: Haibo Chen <haibo.chen@xxxxxxx>
---
drivers/mmc/core/sdio.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index f64b9ac76a5c..5914516df2f7 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -1089,8 +1089,14 @@ static int mmc_sdio_resume(struct mmc_host *host)
}
err = mmc_sdio_reinit_card(host);
} else if (mmc_card_wake_sdio_irq(host)) {
- /* We may have switched to 1-bit mode during suspend */
+ /*
+ * We may have switched to 1-bit mode during suspend,
+ * need to hold retuning, because tuning only supprt
+ * 4-bit mode or 8 bit mode.
+ */
+ mmc_retune_hold_now(host);
err = sdio_enable_4bit_bus(host->card);
+ mmc_retune_release(host);
}
if (err)
--
2.34.1
