On 28/07/23 15:20, Liming Sun wrote:
> This commit implements the runtime PM operations to disable eMMC
> card clock when idle.
>
> Reviewed-by: David Thompson <davthompson@xxxxxxxxxx>
> Signed-off-by: Liming Sun <limings@xxxxxxxxxx>
> ---
> v4->v5:
> - Address Adrian's comment to move the pm_enable to the end to
> avoid race;
> v3->v4:
> - Fix compiling reported by 'kernel test robot';
> v2->v3:
> - Revise the commit message;
> v1->v2:
> Updates for comments from Ulf:
> - Make the runtime PM logic generic for sdhci-of-dwcmshc;
> v1: Initial version.
> ---
> drivers/mmc/host/sdhci-of-dwcmshc.c | 54 ++++++++++++++++++++++++++++-
> 1 file changed, 53 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c
> index e68cd87998c8..5cee42d72257 100644
> --- a/drivers/mmc/host/sdhci-of-dwcmshc.c
> +++ b/drivers/mmc/host/sdhci-of-dwcmshc.c
> @@ -15,6 +15,7 @@
> #include <linux/module.h>
> #include <linux/of.h>
> #include <linux/of_device.h>
> +#include <linux/pm_runtime.h>
> #include <linux/reset.h>
> #include <linux/sizes.h>
>
> @@ -559,6 +560,8 @@ static int dwcmshc_probe(struct platform_device *pdev)
> if (err)
> goto err_setup_host;
>
> + devm_pm_runtime_enable(dev);
By default, runtime PM regards the device as not active, so
typically drivers will use something like pm_runtime_set_active()
prior to pm_runtime_enable(dev)
In fact it is better to enable before adding the host but
increment the usage count to prevent runtime suspend. That
means adding some get/puts, ending up with something like:
+ pm_runtime_get_noresume(dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
err = sdhci_setup_host(host);
if (err)
- goto err_clk;
+ goto err_rpm;
if (rk_priv)
dwcmshc_rk35xx_postinit(host, priv);
err = __sdhci_add_host(host);
if (err)
goto err_setup_host;
+ pm_runtime_put_sync(dev);
return 0;
err_setup_host:
sdhci_cleanup_host(host);
+ err_rpm:
+ pm_runtime_disable(dev);
+ pm_runtime_put_noidle(dev);
err_clk:
clk_disable_unprepare(pltfm_host->clk);
clk_disable_unprepare(priv->bus_clk);
if (rk_priv)
clk_bulk_disable_unprepare(RK35xx_MAX_CLKS,
rk_priv->rockchip_clks);
free_pltfm:
sdhci_pltfm_free(pdev);
return err;
> +
> return 0;
>
> err_setup_host:
> @@ -646,7 +649,56 @@ static int dwcmshc_resume(struct device *dev)
> }
> #endif
>
> -static SIMPLE_DEV_PM_OPS(dwcmshc_pmops, dwcmshc_suspend, dwcmshc_resume);
> +#ifdef CONFIG_PM
> +
> +static void dwcmshc_enable_card_clk(struct sdhci_host *host)
> +{
> + u16 ctrl;
> +
> + ctrl = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
You could save an mmio write:
if (ctrl & SDHCI_CLOCK_INT_EN && !(ctrl & SDHCI_CLOCK_CARD_EN)) {
> + ctrl |= SDHCI_CLOCK_CARD_EN;
> + sdhci_writew(host, ctrl, SDHCI_CLOCK_CONTROL);
}
> +}
> +
> +static void dwcmshc_disable_card_clk(struct sdhci_host *host)
> +{
> + u16 ctrl;
> +
> + ctrl = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
You could save an mmio write:
if (ctrl & SDHCI_CLOCK_CARD_EN) {
> + ctrl &= ~SDHCI_CLOCK_CARD_EN;
> + sdhci_writew(host, ctrl, SDHCI_CLOCK_CONTROL);
}
> +}
> +
> +static int dwcmshc_runtime_suspend(struct device *dev)
> +{
> + struct sdhci_host *host = dev_get_drvdata(dev);
> + int ret = 0;
ret doesn't need initialization
> +
> + ret = sdhci_runtime_suspend_host(host);
If you *only* want to disable the card clock, then
it is probably not necessary to call sdhci_runtime_suspend_host()
and sdhci_runtime_resume_host().
> + if (!ret)
> + dwcmshc_disable_card_clk(host);
> +
> + return ret;
> +}
> +
> +static int dwcmshc_runtime_resume(struct device *dev)
> +{
> + struct sdhci_host *host = dev_get_drvdata(dev);
> + int ret = 0;
ret isn't needed
> +
> + dwcmshc_enable_card_clk(host);
> + ret = sdhci_runtime_resume_host(host, 0);
just
return sdhci_runtime_resume_host(host, 0);
> +
> + return ret;
> +}
> +
> +#endif
> +
> +static const struct dev_pm_ops dwcmshc_pmops = {
> + SET_SYSTEM_SLEEP_PM_OPS(dwcmshc_suspend, dwcmshc_resume)
Typically you need a way to coordinate runtime PM and system PM, refer:
https://www.kernel.org/doc/html/latest/power/runtime_pm.html#runtime-pm-and-system-sleep
> + SET_RUNTIME_PM_OPS(dwcmshc_runtime_suspend,
> + dwcmshc_runtime_resume, NULL)
> +};
>
> static struct platform_driver sdhci_dwcmshc_driver = {
> .driver = {
