Update the RPMHPD references with new bindings defined in rpmhpd.h for Qualcomm SoCs SM8[2345]50. Signed-off-by: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx> --- Changes in v2: - Removed the unnecessary inclusion of header rpmpd.h. This patch is dependent on the series that includes the new rpmhpd.h header https://lore.kernel.org/all/1689744162-9421-1-git-send-email-quic_rohiagar@xxxxxxxxxxx/ Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml | 4 ++-- Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml | 4 ++-- Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml | 4 ++-- Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml | 4 ++-- Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml | 4 ++-- Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml | 4 ++-- Documentation/devicetree/bindings/clock/qcom,videocc.yaml | 4 ++-- .../devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml | 4 ++-- .../devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml | 8 ++++---- .../devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml | 4 ++-- .../devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml | 6 +++--- .../devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml | 4 ++-- .../devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml | 8 ++++---- .../devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml | 4 ++-- .../devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml | 8 ++++---- Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml | 4 ++-- Documentation/devicetree/bindings/mmc/sdhci-msm.yaml | 4 ++-- Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml | 6 +++--- 18 files changed, 44 insertions(+), 44 deletions(-) diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml index d6774db..59cc88a 100644 --- a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml @@ -82,7 +82,7 @@ additionalProperties: false examples: - | #include <dt-bindings/clock/qcom,rpmh.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> clock-controller@af00000 { compatible = "qcom,sm8250-dispcc"; reg = <0x0af00000 0x10000>; @@ -103,7 +103,7 @@ examples: #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; - power-domains = <&rpmhpd SM8250_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; required-opps = <&rpmhpd_opp_low_svs>; }; ... diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml index 23505c8..d723bb1 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml @@ -51,7 +51,7 @@ unevaluatedProperties: false examples: - | #include <dt-bindings/clock/qcom,rpmh.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> clock-controller@abf0000 { compatible = "qcom,sm8350-videocc"; @@ -59,7 +59,7 @@ examples: clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>; - power-domains = <&rpmhpd SM8350_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; required-opps = <&rpmhpd_opp_low_svs>; #clock-cells = <1>; #reset-cells = <1>; diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml index 87ae741..8178c35 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml @@ -64,7 +64,7 @@ examples: - | #include <dt-bindings/clock/qcom,gcc-sm8450.h> #include <dt-bindings/clock/qcom,rpmh.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> clock-controller@ade0000 { compatible = "qcom,sm8450-camcc"; reg = <0xade0000 0x20000>; @@ -72,7 +72,7 @@ examples: <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>; - power-domains = <&rpmhpd SM8450_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; required-opps = <&rpmhpd_opp_low_svs>; #clock-cells = <1>; #reset-cells = <1>; diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml index 1dd1f69..2f22310 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml @@ -76,7 +76,7 @@ examples: - | #include <dt-bindings/clock/qcom,gcc-sm8450.h> #include <dt-bindings/clock/qcom,rpmh.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> clock-controller@af00000 { compatible = "qcom,sm8450-dispcc"; reg = <0x0af00000 0x10000>; @@ -91,7 +91,7 @@ examples: #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; - power-domains = <&rpmhpd SM8450_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; required-opps = <&rpmhpd_opp_low_svs>; }; ... diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml index f1c6dd5..bad8f01 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml @@ -64,13 +64,13 @@ examples: - | #include <dt-bindings/clock/qcom,gcc-sm8450.h> #include <dt-bindings/clock/qcom,rpmh.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> videocc: clock-controller@aaf0000 { compatible = "qcom,sm8450-videocc"; reg = <0x0aaf0000 0x10000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_VIDEO_AHB_CLK>; - power-domains = <&rpmhpd SM8450_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; required-opps = <&rpmhpd_opp_low_svs>; #clock-cells = <1>; #reset-cells = <1>; diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml index ab25f7c..c129f8c 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml @@ -76,7 +76,7 @@ examples: - | #include <dt-bindings/clock/qcom,sm8550-gcc.h> #include <dt-bindings/clock/qcom,rpmh.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> clock-controller@af00000 { compatible = "qcom,sm8550-dispcc"; reg = <0x0af00000 0x10000>; @@ -99,7 +99,7 @@ examples: #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; - power-domains = <&rpmhpd SM8550_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; required-opps = <&rpmhpd_opp_low_svs>; }; ... diff --git a/Documentation/devicetree/bindings/clock/qcom,videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml index 2b07146..6de01cf 100644 --- a/Documentation/devicetree/bindings/clock/qcom,videocc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml @@ -124,7 +124,7 @@ additionalProperties: false examples: - | #include <dt-bindings/clock/qcom,rpmh.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> clock-controller@ab00000 { compatible = "qcom,sdm845-videocc"; reg = <0x0ab00000 0x10000>; @@ -133,7 +133,7 @@ examples: #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; - power-domains = <&rpmhpd SM8250_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; required-opps = <&rpmhpd_opp_low_svs>; }; ... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml index 687c8c1..acd2ed3 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml @@ -54,7 +54,7 @@ examples: #include <dt-bindings/clock/qcom,gcc-sm8250.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interconnect/qcom,sm8250.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> display-controller@ae01000 { compatible = "qcom,sm8250-dpu"; @@ -72,7 +72,7 @@ examples: assigned-clock-rates = <19200000>; operating-points-v2 = <&mdp_opp_table>; - power-domains = <&rpmhpd SM8250_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; interrupt-parent = <&mdss>; interrupts = <0>; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml index 368d3db..5cfb9b9 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml @@ -76,7 +76,7 @@ examples: #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interconnect/qcom,sm8250.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> display-subsystem@ae00000 { compatible = "qcom,sm8250-mdss"; @@ -121,7 +121,7 @@ examples: assigned-clock-rates = <19200000>; operating-points-v2 = <&mdp_opp_table>; - power-domains = <&rpmhpd SM8250_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; interrupt-parent = <&mdss>; interrupts = <0>; @@ -196,7 +196,7 @@ examples: assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; operating-points-v2 = <&dsi_opp_table>; - power-domains = <&rpmhpd SM8250_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; phys = <&dsi0_phy>; phy-names = "dsi"; @@ -286,7 +286,7 @@ examples: assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; operating-points-v2 = <&dsi_opp_table>; - power-domains = <&rpmhpd SM8250_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; phys = <&dsi1_phy>; phy-names = "dsi"; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml index 1205003..1a4e035 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml @@ -51,7 +51,7 @@ examples: #include <dt-bindings/clock/qcom,gcc-sm8350.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interconnect/qcom,sm8350.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> display-controller@ae01000 { compatible = "qcom,sm8350-dpu"; @@ -76,7 +76,7 @@ examples: assigned-clock-rates = <19200000>; operating-points-v2 = <&mdp_opp_table>; - power-domains = <&rpmhpd SM8350_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; interrupt-parent = <&mdss>; interrupts = <0>; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml index 79a226e..1056bed 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml @@ -75,7 +75,7 @@ examples: #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interconnect/qcom,sm8350.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> display-subsystem@ae00000 { compatible = "qcom,sm8350-mdss"; @@ -128,7 +128,7 @@ examples: assigned-clock-rates = <19200000>; operating-points-v2 = <&mdp_opp_table>; - power-domains = <&rpmhpd SM8350_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; interrupt-parent = <&mdss>; interrupts = <0>; @@ -197,7 +197,7 @@ examples: <&mdss_dsi0_phy 1>; operating-points-v2 = <&dsi_opp_table>; - power-domains = <&rpmhpd SM8350_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; phys = <&mdss_dsi0_phy>; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml index 0d17ece..da3fd66 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml @@ -58,7 +58,7 @@ examples: #include <dt-bindings/clock/qcom,gcc-sm8450.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interconnect/qcom,sm8450.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> display-controller@ae01000 { compatible = "qcom,sm8450-dpu"; @@ -83,7 +83,7 @@ examples: assigned-clock-rates = <19200000>; operating-points-v2 = <&mdp_opp_table>; - power-domains = <&rpmhpd SM8450_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; interrupt-parent = <&mdss>; interrupts = <0>; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml index f26eb56..6dd21af 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml @@ -68,7 +68,7 @@ examples: #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interconnect/qcom,sm8450.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> display-subsystem@ae00000 { compatible = "qcom,sm8450-mdss"; @@ -122,7 +122,7 @@ examples: assigned-clock-rates = <19200000>; operating-points-v2 = <&mdp_opp_table>; - power-domains = <&rpmhpd SM8450_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; interrupt-parent = <&mdss>; interrupts = <0>; @@ -202,7 +202,7 @@ examples: assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; operating-points-v2 = <&dsi_opp_table>; - power-domains = <&rpmhpd SM8450_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; phys = <&dsi0_phy>; phy-names = "dsi"; @@ -297,7 +297,7 @@ examples: assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; operating-points-v2 = <&dsi_opp_table>; - power-domains = <&rpmhpd SM8450_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; phys = <&dsi1_phy>; phy-names = "dsi"; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml index ff58a74..99908fb 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml @@ -57,7 +57,7 @@ examples: #include <dt-bindings/clock/qcom,sm8550-dispcc.h> #include <dt-bindings/clock/qcom,sm8550-gcc.h> #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> display-controller@ae01000 { compatible = "qcom,sm8550-dpu"; @@ -82,7 +82,7 @@ examples: assigned-clock-rates = <19200000>; operating-points-v2 = <&mdp_opp_table>; - power-domains = <&rpmhpd SM8550_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; interrupt-parent = <&mdss>; interrupts = <0>; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml index 887be33..a464312 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml @@ -68,7 +68,7 @@ examples: #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interconnect/qcom,sm8550-rpmh.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> display-subsystem@ae00000 { compatible = "qcom,sm8550-mdss"; @@ -122,7 +122,7 @@ examples: assigned-clock-rates = <19200000>; operating-points-v2 = <&mdp_opp_table>; - power-domains = <&rpmhpd SM8550_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; interrupt-parent = <&mdss>; interrupts = <0>; @@ -197,7 +197,7 @@ examples: assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; operating-points-v2 = <&dsi_opp_table>; - power-domains = <&rpmhpd SM8550_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; phys = <&dsi0_phy>; phy-names = "dsi"; @@ -286,7 +286,7 @@ examples: assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; operating-points-v2 = <&dsi_opp_table>; - power-domains = <&rpmhpd SM8550_MMCX>; + power-domains = <&rpmhpd RPMHPD_MMCX>; phys = <&dsi1_phy>; phy-names = "dsi"; diff --git a/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml index 7915dcd..f66033a 100644 --- a/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml @@ -106,7 +106,7 @@ examples: #include <dt-bindings/clock/qcom,videocc-sm8250.h> #include <dt-bindings/interconnect/qcom,sm8250.h> #include <dt-bindings/clock/qcom,gcc-sm8250.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> venus: video-codec@aa00000 { compatible = "qcom,sm8250-venus"; @@ -114,7 +114,7 @@ examples: interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&videocc MVS0C_GDSC>, <&videocc MVS0_GDSC>, - <&rpmhpd SM8250_MX>; + <&rpmhpd RPMHPD_MX>; power-domain-names = "venus", "vcodec0", "mx"; clocks = <&gcc GCC_VIDEO_AXI0_CLK>, diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml index 6da28e6..80141eb 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml @@ -215,7 +215,7 @@ examples: #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-sm8250.h> #include <dt-bindings/clock/qcom,rpmh.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> sdhc_2: mmc@8804000 { compatible = "qcom,sm8250-sdhci", "qcom,sdhci-msm-v5"; @@ -232,7 +232,7 @@ examples: iommus = <&apps_smmu 0x4a0 0x0>; qcom,dll-config = <0x0007642c>; qcom,ddr-config = <0x80040868>; - power-domains = <&rpmhpd SM8250_CX>; + power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&sdhc2_opp_table>; diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml index af24f9a..9a04d19 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml @@ -139,7 +139,7 @@ examples: #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/mailbox/qcom-ipcc.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> remoteproc@30000000 { compatible = "qcom,sm8450-adsp-pas"; @@ -160,8 +160,8 @@ examples: memory-region = <&adsp_mem>; - power-domains = <&rpmhpd SM8450_LCX>, - <&rpmhpd SM8450_LMX>; + power-domains = <&rpmhpd RPMHPD_LCX>, + <&rpmhpd RPMHPD_LMX>; power-domain-names = "lcx", "lmx"; qcom,qmp = <&aoss_qmp>; -- 2.7.4
