Re: [PATCH V8 06/23] mmc: core: Support UHS-II card control and access

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jul 10, 2023 at 9:24 PM Adrian Hunter <adrian.hunter@xxxxxxxxx> wrote:
>
> On 21/06/23 13:01, Victor Shih wrote:
> > From: Victor Shih <victor.shih@xxxxxxxxxxxxxxxxxxx>
> >
> > Embed UHS-II access/control functionality into the MMC request
> > processing flow.
> >
> > Updates in V8:
> >  - Add MMC_UHS2_SUPPORT to be cleared in sd_uhs2_detect().
> >  - Modify return value in sd_uhs2_attach().
> >
> > Updates in V7:
> >  - Add mmc_uhs2_card_prepare_cmd helper function in sd_ops.h.
> >  - Drop uhs2_state in favor of ios->timing.
> >  - Remove unnecessary functions.
> >
> > Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
> > Signed-off-by: Jason Lai <jason.lai@xxxxxxxxxxxxxxxxxxx>
> > Signed-off-by: Victor Shih <victor.shih@xxxxxxxxxxxxxxxxxxx>
> > ---
> >  drivers/mmc/core/block.c   |   18 +-
> >  drivers/mmc/core/core.c    |    8 +
> >  drivers/mmc/core/mmc_ops.c |   25 +-
> >  drivers/mmc/core/mmc_ops.h |    1 +
> >  drivers/mmc/core/sd.c      |   13 +-
> >  drivers/mmc/core/sd.h      |    4 +
> >  drivers/mmc/core/sd_ops.c  |   11 +
> >  drivers/mmc/core/sd_ops.h  |   18 +
> >  drivers/mmc/core/sd_uhs2.c | 1137 +++++++++++++++++++++++++++++++++++-
> >  9 files changed, 1176 insertions(+), 59 deletions(-)
> >
> > diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
> > index 2e9d3760c202..013ab071db9b 100644
> > --- a/drivers/mmc/core/block.c
> > +++ b/drivers/mmc/core/block.c
> > @@ -918,15 +918,9 @@ static int mmc_sd_num_wr_blocks(struct mmc_card *card, u32 *written_blocks)
> >
> >       struct scatterlist sg;
> >
> > -     cmd.opcode = MMC_APP_CMD;
> > -     cmd.arg = card->rca << 16;
> > -     cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
> > -
> > -     err = mmc_wait_for_cmd(card->host, &cmd, 0);
> > -     if (err)
> > -             return err;
> > -     if (!mmc_host_is_spi(card->host) && !(cmd.resp[0] & R1_APP_CMD))
> > -             return -EIO;
> > +     err = mmc_app_cmd(card->host, card);
> > +             if (err)
> > +                     return err;
> >
> >       memset(&cmd, 0, sizeof(struct mmc_command));
> >
> > @@ -1612,6 +1606,9 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
> >       struct request *req = mmc_queue_req_to_req(mqrq);
> >       struct mmc_blk_data *md = mq->blkdata;
> >       bool do_rel_wr, do_data_tag;
> > +     bool do_multi;
> > +
> > +     do_multi = (card->host->flags & MMC_UHS2_SD_TRAN) ? true : false;
> >
> >       mmc_blk_data_prep(mq, mqrq, recovery_mode, &do_rel_wr, &do_data_tag);
> >
> > @@ -1622,7 +1619,7 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
> >               brq->cmd.arg <<= 9;
> >       brq->cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
> >
> > -     if (brq->data.blocks > 1 || do_rel_wr) {
> > +     if (brq->data.blocks > 1 || do_rel_wr || do_multi) {
> >               /* SPI multiblock writes terminate using a special
> >                * token, not a STOP_TRANSMISSION request.
> >                */
> > @@ -1635,6 +1632,7 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
> >               brq->mrq.stop = NULL;
> >               readcmd = MMC_READ_SINGLE_BLOCK;
> >               writecmd = MMC_WRITE_BLOCK;
> > +             brq->cmd.uhs2_tmode0_flag = 1;
> >       }
> >       brq->cmd.opcode = rq_data_dir(req) == READ ? readcmd : writecmd;
> >
> > diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
> > index 7b8227e7ed26..04783f37da92 100644
> > --- a/drivers/mmc/core/core.c
> > +++ b/drivers/mmc/core/core.c
> > @@ -334,6 +334,8 @@ static int mmc_mrq_prep(struct mmc_host *host, struct mmc_request *mrq)
> >
> >  int mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
> >  {
> > +     struct uhs2_command uhs2_cmd;
> > +     __be32 payload[4]; /* for maximum size */
> >       int err;
> >
> >       init_completion(&mrq->cmd_completion);
> > @@ -351,6 +353,8 @@ int mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
> >       if (err)
> >               return err;
> >
> > +     mmc_uhs2_card_prepare_cmd(host, mrq, uhs2_cmd, payload);
> > +
> >       led_trigger_event(host->led, LED_FULL);
> >       __mmc_start_request(host, mrq);
>
> __mmc_start_request() is also called by mmc_wait_for_req_done()
> but uhs2_cmd is local to mmc_start_request(), so if mmc_wait_for_req_done()
> is ever called in UHS2 case with cmd->retries, it looks like
> host controller might try to access uhs2_cmd which is no
> longer valid?
>
>

Hi, Adrian

      I traced the code between the SD card initialization process and
found that
      __mmc_start_request() is only called by mmc_start_request in the
UHS2 case.
      I'm not sure if there's anything I'm missing, could you help me
with more comments?
      Or may you have any ideas on how to avoid this situation?

Thanks, Victor Shih

> >
> > @@ -430,6 +434,8 @@ EXPORT_SYMBOL(mmc_wait_for_req_done);
> >   */
> >  int mmc_cqe_start_req(struct mmc_host *host, struct mmc_request *mrq)
> >  {
> > +     struct uhs2_command uhs2_cmd;
> > +     __be32 payload[4]; /* for maximum size */
> >       int err;
> >
> >       /*
> > @@ -450,6 +456,8 @@ int mmc_cqe_start_req(struct mmc_host *host, struct mmc_request *mrq)
> >       if (err)
> >               goto out_err;
> >
> > +     mmc_uhs2_card_prepare_cmd(host, mrq, uhs2_cmd, payload);
> > +
> >       err = host->cqe_ops->cqe_request(host, mrq);
> >       if (err)
> >               goto out_err;
> > diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
> > index 3b3adbddf664..8ae205a07f9b 100644
> > --- a/drivers/mmc/core/mmc_ops.c
> > +++ b/drivers/mmc/core/mmc_ops.c
> > @@ -144,10 +144,24 @@ int mmc_set_dsr(struct mmc_host *host)
> >       return mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
> >  }
> >
> > +int __mmc_go_idle(struct mmc_host *host)
> > +{
> > +     struct mmc_command cmd = {};
> > +     int err;
> > +
> > +     cmd.opcode = MMC_GO_IDLE_STATE;
> > +     cmd.arg = 0;
> > +     cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_NONE | MMC_CMD_BC;
> > +
> > +     err = mmc_wait_for_cmd(host, &cmd, 0);
> > +     mmc_delay(1);
> > +
> > +     return err;
> > +}
> > +
> >  int mmc_go_idle(struct mmc_host *host)
> >  {
> >       int err;
> > -     struct mmc_command cmd = {};
> >
> >       /*
> >        * Non-SPI hosts need to prevent chipselect going active during
> > @@ -163,13 +177,7 @@ int mmc_go_idle(struct mmc_host *host)
> >               mmc_delay(1);
> >       }
> >
> > -     cmd.opcode = MMC_GO_IDLE_STATE;
> > -     cmd.arg = 0;
> > -     cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_NONE | MMC_CMD_BC;
> > -
> > -     err = mmc_wait_for_cmd(host, &cmd, 0);
> > -
> > -     mmc_delay(1);
> > +     err = __mmc_go_idle(host);
> >
> >       if (!mmc_host_is_spi(host)) {
> >               mmc_set_chip_select(host, MMC_CS_DONTCARE);
> > @@ -300,6 +308,7 @@ int mmc_send_adtc_data(struct mmc_card *card, struct mmc_host *host, u32 opcode,
> >        * not R1 plus a data block.
> >        */
> >       cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
> > +     cmd.uhs2_tmode0_flag = 1;
> >
> >       data.blksz = len;
> >       data.blocks = 1;
> > diff --git a/drivers/mmc/core/mmc_ops.h b/drivers/mmc/core/mmc_ops.h
> > index 09ffbc00908b..abda7492d578 100644
> > --- a/drivers/mmc/core/mmc_ops.h
> > +++ b/drivers/mmc/core/mmc_ops.h
> > @@ -25,6 +25,7 @@ struct mmc_command;
> >  int mmc_select_card(struct mmc_card *card);
> >  int mmc_deselect_cards(struct mmc_host *host);
> >  int mmc_set_dsr(struct mmc_host *host);
> > +int __mmc_go_idle(struct mmc_host *host);
> >  int mmc_go_idle(struct mmc_host *host);
> >  int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr);
> >  int mmc_set_relative_addr(struct mmc_card *card);
> > diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
> > index 72b664ed90cf..2ff9c37a1975 100644
> > --- a/drivers/mmc/core/sd.c
> > +++ b/drivers/mmc/core/sd.c
> > @@ -207,7 +207,7 @@ static int mmc_decode_csd(struct mmc_card *card)
> >  /*
> >   * Given a 64-bit response, decode to our card SCR structure.
> >   */
> > -static int mmc_decode_scr(struct mmc_card *card)
> > +int mmc_decode_scr(struct mmc_card *card)
> >  {
> >       struct sd_scr *scr = &card->scr;
> >       unsigned int scr_struct;
> > @@ -904,7 +904,7 @@ int mmc_sd_get_csd(struct mmc_card *card)
> >       return 0;
> >  }
> >
> > -static int mmc_sd_get_ro(struct mmc_host *host)
> > +int mmc_sd_get_ro(struct mmc_host *host)
> >  {
> >       int ro;
> >
> > @@ -1616,11 +1616,6 @@ static void mmc_sd_detect(struct mmc_host *host)
> >       }
> >  }
> >
> > -static int sd_can_poweroff_notify(struct mmc_card *card)
> > -{
> > -     return card->ext_power.feature_support & SD_EXT_POWER_OFF_NOTIFY;
> > -}
> > -
> >  static int sd_busy_poweroff_notify_cb(void *cb_data, bool *busy)
> >  {
> >       struct sd_busy_data *data = cb_data;
> > @@ -1644,7 +1639,7 @@ static int sd_busy_poweroff_notify_cb(void *cb_data, bool *busy)
> >       return 0;
> >  }
> >
> > -static int sd_poweroff_notify(struct mmc_card *card)
> > +int sd_poweroff_notify(struct mmc_card *card)
> >  {
> >       struct sd_busy_data cb_data;
> >       u8 *reg_buf;
> > @@ -1692,7 +1687,7 @@ static int _mmc_sd_suspend(struct mmc_host *host)
> >       if (mmc_card_suspended(card))
> >               goto out;
> >
> > -     if (sd_can_poweroff_notify(card))
> > +     if (mmc_sd_can_poweroff_notify(card))
> >               err = sd_poweroff_notify(card);
> >       else if (!mmc_host_is_spi(host))
> >               err = mmc_deselect_cards(host);
> > diff --git a/drivers/mmc/core/sd.h b/drivers/mmc/core/sd.h
> > index 1af5a038bae9..d31259919ee5 100644
> > --- a/drivers/mmc/core/sd.h
> > +++ b/drivers/mmc/core/sd.h
> > @@ -11,10 +11,14 @@ struct mmc_card;
> >
> >  int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid, u32 *rocr);
> >  int mmc_sd_get_csd(struct mmc_card *card);
> > +int mmc_sd_get_ro(struct mmc_host *host);
> >  void mmc_decode_cid(struct mmc_card *card);
> >  int mmc_sd_setup_card(struct mmc_host *host, struct mmc_card *card,
> >       bool reinit);
> >  unsigned mmc_sd_get_max_clock(struct mmc_card *card);
> >  int mmc_sd_switch_hs(struct mmc_card *card);
> >
> > +/* These call back functions were also used by UHS2 sd card */
> > +int sd_poweroff_notify(struct mmc_card *card);
> > +
> >  #endif
> > diff --git a/drivers/mmc/core/sd_ops.c b/drivers/mmc/core/sd_ops.c
> > index ef8d1dce5af1..1f9580491ad0 100644
> > --- a/drivers/mmc/core/sd_ops.c
> > +++ b/drivers/mmc/core/sd_ops.c
> > @@ -27,6 +27,15 @@ int mmc_app_cmd(struct mmc_host *host, struct mmc_card *card)
> >       if (WARN_ON(card && card->host != host))
> >               return -EINVAL;
> >
> > +     /*
> > +      * UHS2 packet has APP bit so only set APP_CMD flag here.
> > +      * Will set the APP bit when assembling UHS2 packet.
> > +      */
> > +     if (host->flags & MMC_UHS2_SD_TRAN) {
> > +             host->uhs2_app_cmd = true;
> > +             return 0;
> > +     }
> > +
> >       cmd.opcode = MMC_APP_CMD;
> >
> >       if (card) {
> > @@ -281,6 +290,7 @@ int mmc_app_send_scr(struct mmc_card *card)
> >       cmd.opcode = SD_APP_SEND_SCR;
> >       cmd.arg = 0;
> >       cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
> > +     cmd.uhs2_tmode0_flag = 1;
> >
> >       data.blksz = 8;
> >       data.blocks = 1;
> > @@ -344,6 +354,7 @@ int mmc_app_sd_status(struct mmc_card *card, void *ssr)
> >       cmd.opcode = SD_APP_SD_STATUS;
> >       cmd.arg = 0;
> >       cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_ADTC;
> > +     cmd.uhs2_tmode0_flag = 1;
> >
> >       data.blksz = 64;
> >       data.blocks = 1;
> > diff --git a/drivers/mmc/core/sd_ops.h b/drivers/mmc/core/sd_ops.h
> > index 3ba7b3cf4652..8c2da57ca2c2 100644
> > --- a/drivers/mmc/core/sd_ops.h
> > +++ b/drivers/mmc/core/sd_ops.h
> > @@ -11,6 +11,7 @@
> >  #include <linux/types.h>
> >
> >  struct mmc_card;
> > +struct mmc_command;
> >  struct mmc_host;
> >
> >  int mmc_app_set_bus_width(struct mmc_card *card, int width);
> > @@ -19,10 +20,27 @@ int mmc_send_if_cond(struct mmc_host *host, u32 ocr);
> >  int mmc_send_if_cond_pcie(struct mmc_host *host, u32 ocr);
> >  int mmc_send_relative_addr(struct mmc_host *host, unsigned int *rca);
> >  int mmc_app_send_scr(struct mmc_card *card);
> > +int mmc_decode_scr(struct mmc_card *card);
> >  int mmc_sd_switch(struct mmc_card *card, int mode, int group,
> >       u8 value, u8 *resp);
> >  int mmc_app_sd_status(struct mmc_card *card, void *ssr);
> >  int mmc_app_cmd(struct mmc_host *host, struct mmc_card *card);
> > +void mmc_uhs2_prepare_cmd(struct mmc_host *host, struct mmc_request *mrq);
> > +
> > +static inline void mmc_uhs2_card_prepare_cmd(struct mmc_host *host, struct mmc_request *mrq,
> > +                                          struct uhs2_command uhs2_cmd, __be32 payload[4])
> > +{
> > +     if (host->flags & MMC_UHS2_SD_TRAN) {
> > +             uhs2_cmd.payload = payload;
> > +             mrq->cmd->uhs2_cmd = &uhs2_cmd;
> > +             mmc_uhs2_prepare_cmd(host, mrq);
> > +     }
> > +}
> > +
> > +static inline int mmc_sd_can_poweroff_notify(struct mmc_card *card)
> > +{
> > +     return card->ext_power.feature_support & SD_EXT_POWER_OFF_NOTIFY;
> > +}
> >
> >  #endif
> >
> > diff --git a/drivers/mmc/core/sd_uhs2.c b/drivers/mmc/core/sd_uhs2.c
> > index 06b2aab52b93..0a1b00b59499 100644
> > --- a/drivers/mmc/core/sd_uhs2.c
> > +++ b/drivers/mmc/core/sd_uhs2.c
> > @@ -1,23 +1,51 @@
> >  // SPDX-License-Identifier: GPL-2.0-only
> >  /*
> >   * Copyright (C) 2021 Linaro Ltd
> > - *
> >   * Author: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
> >   *
> > + * Copyright (C) 2014 Intel Corp, All Rights Reserved.
> > + * Author: Yi Sun <yi.y.sun@xxxxxxxxx>
> > + *
> > + * Copyright (C) 2020 Genesys Logic, Inc.
> > + * Authors: Ben Chuang <ben.chuang@xxxxxxxxxxxxxxxxxxx>
> > + *
> > + * Copyright (C) 2020 Linaro Limited
> > + * Author: AKASHI Takahiro <takahiro.akashi@xxxxxxxxxx>
> > + *
> > + * Copyright (C) 2022 Genesys Logic, Inc.
> > + * Authors: Jason Lai <jason.lai@xxxxxxxxxxxxxxxxxxx>
> > + *
> > + * Copyright (C) 2023 Genesys Logic, Inc.
> > + * Authors: Victor Shih <victor.shih@xxxxxxxxxxxxxxxxxxx>
> > + *
> >   * Support for SD UHS-II cards
> >   */
> >  #include <linux/err.h>
> > +#include <linux/pm_runtime.h>
> >
> >  #include <linux/mmc/host.h>
> >  #include <linux/mmc/card.h>
> > +#include <linux/mmc/mmc.h>
> > +#include <linux/mmc/sd.h>
> > +#include <linux/mmc/sd_uhs2.h>
> >
> > +#include "card.h"
> >  #include "core.h"
> >  #include "bus.h"
> >  #include "sd.h"
> > +#include "sd_ops.h"
> >  #include "mmc_ops.h"
> >
> > +#define UHS2_WAIT_CFG_COMPLETE_PERIOD_US  (1 * 1000) /* 1ms */
> > +#define UHS2_WAIT_CFG_COMPLETE_TIMEOUT_MS 100        /* 100ms */
> > +
> >  static const unsigned int sd_uhs2_freqs[] = { 52000000, 26000000 };
> >
> > +struct sd_uhs2_wait_active_state_data {
> > +     struct mmc_host *host;
> > +     struct mmc_command *cmd;
> > +};
> > +
> >  static int sd_uhs2_power_up(struct mmc_host *host)
> >  {
> >       int err;
> > @@ -50,6 +78,43 @@ static int sd_uhs2_power_off(struct mmc_host *host)
> >       return host->ops->uhs2_control(host, UHS2_SET_IOS);
> >  }
> >
> > +/*
> > + * sd_uhs2_cmd_assemble() - build up UHS-II command packet which is embedded in
> > + *                          mmc_command structure
> > + * @cmd:     MMC command to executed
> > + * @uhs2_cmd:        UHS2 command corresponded to MMC command
> > + * @header:  Header field of UHS-II command cxpacket
> > + * @arg:     Argument field of UHS-II command packet
> > + * @payload: Payload field of UHS-II command packet
> > + * @plen:    Payload length
> > + * @resp:    Response buffer is allocated by caller and it is used to keep
> > + *              the response of CM-TRAN command. For SD-TRAN command, uhs2_resp
> > + *              should be null and SD-TRAN command response should be stored in
> > + *              resp of mmc_command.
> > + * @resp_len:        Response buffer length
> > + *
> > + * The uhs2_command structure contains message packets which are transmited/
> > + * received on UHS-II bus. This function fills in the contents of uhs2_command
> > + * structure and embededs UHS2 command into mmc_command structure, which is used
> > + * in legacy SD operation functions.
> > + *
> > + */
> > +static void sd_uhs2_cmd_assemble(struct mmc_command *cmd,
> > +                              struct uhs2_command *uhs2_cmd,
> > +                              u16 header, u16 arg, __be32 *payload,
> > +                              u8 plen, u8 *resp, u8 resp_len)
> > +{
> > +     uhs2_cmd->header = header;
> > +     uhs2_cmd->arg = arg;
> > +     uhs2_cmd->payload = payload;
> > +     uhs2_cmd->payload_len = plen * sizeof(u32);
> > +     uhs2_cmd->packet_len = uhs2_cmd->payload_len + 4;
> > +
> > +     cmd->uhs2_cmd = uhs2_cmd;
> > +     cmd->uhs2_resp = resp;
> > +     cmd->uhs2_resp_len = resp_len;
> > +}
> > +
> >  /*
> >   * Run the phy initialization sequence, which mainly relies on the UHS-II host
> >   * to check that we reach the expected electrical state, between the host and
> > @@ -57,7 +122,15 @@ static int sd_uhs2_power_off(struct mmc_host *host)
> >   */
> >  static int sd_uhs2_phy_init(struct mmc_host *host)
> >  {
> > -     return 0;
> > +     int err = 0;
> > +
> > +     err = host->ops->uhs2_control(host, UHS2_PHY_INIT);
> > +     if (err) {
> > +             pr_err("%s: failed to initial phy for UHS-II!\n",
> > +                    mmc_hostname(host));
> > +     }
> > +
> > +     return err;
> >  }
> >
> >  /*
> > @@ -66,6 +139,82 @@ static int sd_uhs2_phy_init(struct mmc_host *host)
> >   */
> >  static int sd_uhs2_dev_init(struct mmc_host *host)
> >  {
> > +     struct mmc_command cmd = {0};
> > +     struct uhs2_command uhs2_cmd = {};
> > +     u32 cnt;
> > +     u32 dap, gap, resp_gap;
> > +     u16 header, arg;
> > +     __be32 payload[UHS2_DEV_INIT_PAYLOAD_LEN];
> > +     u8 gd = 0;
> > +     u8 resp[UHS2_DEV_ENUM_RESP_LEN] = {0};
> > +     int err;
> > +
> > +     dap = host->uhs2_caps.dap;
> > +     gap = host->uhs2_caps.gap;
> > +
> > +     /*
> > +      * Refer to UHS-II Addendum Version 1.02 Figure 6-21 to see DEVICE_INIT CCMD format.
> > +      * Head:
> > +      *      - Control Write(R/W=1) with 4-Byte payload(PLEN=01b).
> > +      *      - IOADR = CMD_BASE + 002h
> > +      * Payload:
> > +      *      - bit [3:0]  : GAP(Group Allocated Power)
> > +      *      - bit [7:4]  : GD(Group Descriptor)
> > +      *      - bit [11]   : Complete Flag
> > +      *      - bit [15:12]: DAP(Device Allocated Power)
> > +      */
> > +     header = UHS2_NATIVE_PACKET | UHS2_PACKET_TYPE_CCMD;
> > +     arg = ((UHS2_DEV_CMD_DEVICE_INIT & 0xFF) << 8) |
> > +            UHS2_NATIVE_CMD_WRITE |
> > +            UHS2_NATIVE_CMD_PLEN_4B |
> > +            (UHS2_DEV_CMD_DEVICE_INIT >> 8);
> > +
> > +     /*
> > +      * Refer to UHS-II Addendum Version 1.02 section 6.3.1.
> > +      * Max. time from DEVICE_INIT CCMD EOP reception on Device
> > +      * Rx to its SOP transmission on Device Tx(Tfwd_init_cmd) is
> > +      * 1 second.
> > +      */
> > +     cmd.busy_timeout = 1000;
> > +
> > +     /*
> > +      * Refer to UHS-II Addendum Version 1.02 section 6.2.6.3.
> > +      * When the number of the DEVICE_INIT commands is reach to
> > +      * 30 tiems, Host shall stop issuing DEVICE_INIT command
> > +      * and regard it as an error.
> > +      */
> > +     for (cnt = 0; cnt < 30; cnt++) {
> > +             payload[0] = ((dap & 0xF) << 12) |
> > +                           UHS2_DEV_INIT_COMPLETE_FLAG |
> > +                           ((gd & 0xF) << 4) |
> > +                           (gap & 0xF);
> > +
> > +             sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg,
> > +                                  payload, UHS2_DEV_INIT_PAYLOAD_LEN,
> > +                                  resp, UHS2_DEV_INIT_RESP_LEN);
> > +
> > +             err = mmc_wait_for_cmd(host, &cmd, 0);
> > +             if (err) {
> > +                     pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
> > +                            mmc_hostname(host), __func__, err);
> > +                     return err;
> > +             }
> > +
> > +             if (resp[3] != (UHS2_DEV_CMD_DEVICE_INIT & 0xFF)) {
> > +                     pr_err("%s: DEVICE_INIT response is wrong!\n",
> > +                            mmc_hostname(host));
> > +                     return -EIO;
> > +             }
> > +
> > +             if (resp[5] & 0x8) {
> > +                     host->uhs2_caps.group_desc = gd;
> > +                     return 0;
> > +             }
> > +             resp_gap = resp[4] & 0x0F;
> > +             if (gap == resp_gap)
> > +                     gd++;
> > +     }
> > +
> >       return 0;
> >  }
> >
> > @@ -76,6 +225,52 @@ static int sd_uhs2_dev_init(struct mmc_host *host)
> >   */
> >  static int sd_uhs2_enum(struct mmc_host *host, u32 *node_id)
> >  {
> > +     struct mmc_command cmd = {0};
> > +     struct uhs2_command uhs2_cmd = {};
> > +     u16 header, arg;
> > +     __be32 payload[UHS2_DEV_ENUM_PAYLOAD_LEN];
> > +     u8 id_f = 0xF, id_l = 0x0;
> > +     u8 resp[UHS2_DEV_ENUM_RESP_LEN] = {0};
> > +     int err;
> > +
> > +     /*
> > +      * Refer to UHS-II Addendum Version 1.02 Figure 6-28 to see ENUMERATE CCMD format.
> > +      * Header:
> > +      *      - Control Write(R/W=1) with 4-Byte payload(PLEN=01b).
> > +      *      - IOADR = CMD_BASE + 003h
> > +      * Payload:
> > +      *      - bit [3:0]: ID_L(Last Node ID)
> > +      *      - bit [7:4]: ID_F(First Node ID)
> > +      */
> > +     header = UHS2_NATIVE_PACKET | UHS2_PACKET_TYPE_CCMD;
> > +     arg = ((UHS2_DEV_CMD_ENUMERATE & 0xFF) << 8) |
> > +            UHS2_NATIVE_CMD_WRITE |
> > +            UHS2_NATIVE_CMD_PLEN_4B |
> > +            (UHS2_DEV_CMD_ENUMERATE >> 8);
> > +
> > +     payload[0] = (id_f << 4) | id_l;
> > +     payload[0] = cpu_to_be32(payload[0]);
> > +
> > +     sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, payload, UHS2_DEV_ENUM_PAYLOAD_LEN,
> > +                          resp, UHS2_DEV_ENUM_RESP_LEN);
> > +
> > +     err = mmc_wait_for_cmd(host, &cmd, 0);
> > +     if (err) {
> > +             pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
> > +                    mmc_hostname(host), __func__, err);
> > +             return err;
> > +     }
> > +
> > +     if (resp[3] != (UHS2_DEV_CMD_ENUMERATE & 0xFF)) {
> > +             pr_err("%s: ENUMERATE response is wrong!\n",
> > +                    mmc_hostname(host));
> > +             return -EIO;
> > +     }
> > +
> > +     id_f = (resp[4] >> 4) & 0xF;
> > +     id_l = resp[4] & 0xF;
> > +     *node_id = id_f;
> > +
> >       return 0;
> >  }
> >
> > @@ -86,6 +281,181 @@ static int sd_uhs2_enum(struct mmc_host *host, u32 *node_id)
> >   */
> >  static int sd_uhs2_config_read(struct mmc_host *host, struct mmc_card *card)
> >  {
> > +     struct mmc_command cmd = {0};
> > +     struct uhs2_command uhs2_cmd = {};
> > +     u16 header, arg;
> > +     u32 cap;
> > +     int err;
> > +
> > +     /*
> > +      * Use Control Read CCMD to read Generic Capability from Configuration Register.
> > +      * - Control Write(R/W=1) with 4-Byte payload(PLEN=01b).
> > +      * - IOADR = Generic Capability Register(CFG_BASE + 000h)
> > +      */
> > +     header = UHS2_NATIVE_PACKET | UHS2_PACKET_TYPE_CCMD | card->uhs2_config.node_id;
> > +     arg = ((UHS2_DEV_CONFIG_GEN_CAPS & 0xFF) << 8) |
> > +            UHS2_NATIVE_CMD_READ |
> > +            UHS2_NATIVE_CMD_PLEN_4B |
> > +            (UHS2_DEV_CONFIG_GEN_CAPS >> 8);
> > +
> > +     /*
> > +      * There is no payload because per spec, there should be
> > +      * no payload field for read CCMD.
> > +      * Plen is set in arg. Per spec, plen for read CCMD
> > +      * represents the len of read data which is assigned in payload
> > +      * of following RES (p136).
> > +      */
> > +     sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, NULL, 0, NULL, 0);
> > +
> > +     err = mmc_wait_for_cmd(host, &cmd, 0);
> > +     if (err) {
> > +             pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
> > +                    mmc_hostname(host), __func__, err);
> > +             return err;
> > +     }
> > +
> > +     /*
> > +      * Generic Capability Register:
> > +      * bit [7:0]  : Reserved
> > +      * bit [13:8] : Device-Specific Number of Lanes and Functionality
> > +      *              bit 8: 2L-HD
> > +      *              bit 9: 2D-1U FD
> > +      *              bit 10: 1D-2U FD
> > +      *              bit 11: 2D-2U FD
> > +      *              Others: Reserved
> > +      * bit [14]   : DADR Length
> > +      *              0: 4 bytes
> > +      *              1: Reserved
> > +      * bit [23:16]: Application Type
> > +      *              bit 16: 0=Non-SD memory, 1=SD memory
> > +      *              bit 17: 0=Non-SDIO, 1=SDIO
> > +      *              bit 18: 0=Card, 1=Embedded
> > +      * bit [63:24]: Reserved
> > +      */
> > +     cap = cmd.resp[0];
> > +     card->uhs2_config.n_lanes =
> > +                             (cap >> UHS2_DEV_CONFIG_N_LANES_POS) &
> > +                             UHS2_DEV_CONFIG_N_LANES_MASK;
> > +     card->uhs2_config.dadr_len =
> > +                             (cap >> UHS2_DEV_CONFIG_DADR_POS) &
> > +                             UHS2_DEV_CONFIG_DADR_MASK;
> > +     card->uhs2_config.app_type =
> > +                             (cap >> UHS2_DEV_CONFIG_APP_POS) &
> > +                             UHS2_DEV_CONFIG_APP_MASK;
> > +
> > +     /*
> > +      * Use Control Read CCMD to read PHY Capability from Configuration Register.
> > +      * - Control Write(R/W=1) with 8-Byte payload(PLEN=10b).
> > +      * - IOADR = PHY Capability Register(CFG_BASE + 002h)
> > +      */
> > +     arg = ((UHS2_DEV_CONFIG_PHY_CAPS & 0xFF) << 8) |
> > +            UHS2_NATIVE_CMD_READ |
> > +            UHS2_NATIVE_CMD_PLEN_8B |
> > +           (UHS2_DEV_CONFIG_PHY_CAPS >> 8);
> > +
> > +     sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, NULL, 0, NULL, 0);
> > +
> > +     err = mmc_wait_for_cmd(host, &cmd, 0);
> > +     if (err) {
> > +             pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
> > +                    mmc_hostname(host), __func__, err);
> > +             return err;
> > +     }
> > +
> > +     /*
> > +      * PHY Capability Register:
> > +      * bit [3:0]  : PHY Minor Revision
> > +      * bit [5:4]  : PHY Major Revision
> > +      * bit [15]   : Support Hibernate Mode
> > +      *              0: Not support Hibernate Mode
> > +      *              1: Support Hibernate Mode
> > +      * bit [31:16]: Reserved
> > +      * bit [35:32]: Device-Specific N_LSS_SYN
> > +      * bit [39:36]: Device-Specific N_LSS_DIR
> > +      * bit [63:40]: Reserved
> > +      */
> > +     cap = cmd.resp[0];
> > +     card->uhs2_config.phy_minor_rev =
> > +                             cap & UHS2_DEV_CONFIG_PHY_MINOR_MASK;
> > +     card->uhs2_config.phy_major_rev =
> > +                             (cap >> UHS2_DEV_CONFIG_PHY_MAJOR_POS) &
> > +                              UHS2_DEV_CONFIG_PHY_MAJOR_MASK;
> > +     card->uhs2_config.can_hibernate =
> > +                             (cap >> UHS2_DEV_CONFIG_CAN_HIBER_POS) &
> > +                              UHS2_DEV_CONFIG_CAN_HIBER_MASK;
> > +
> > +     cap = cmd.resp[1];
> > +     card->uhs2_config.n_lss_sync =
> > +                             cap & UHS2_DEV_CONFIG_N_LSS_SYN_MASK;
> > +     card->uhs2_config.n_lss_dir =
> > +                             (cap >> UHS2_DEV_CONFIG_N_LSS_DIR_POS) &
> > +                             UHS2_DEV_CONFIG_N_LSS_DIR_MASK;
> > +     if (card->uhs2_config.n_lss_sync == 0)
> > +             card->uhs2_config.n_lss_sync = 16 << 2;
> > +     else
> > +             card->uhs2_config.n_lss_sync <<= 2;
> > +
> > +     if (card->uhs2_config.n_lss_dir == 0)
> > +             card->uhs2_config.n_lss_dir = 16 << 3;
> > +     else
> > +             card->uhs2_config.n_lss_dir <<= 3;
> > +
> > +     /*
> > +      * Use Control Read CCMD to read LINK/TRAN Capability from Configuration Register.
> > +      * - Control Write(R/W=1) with 8-Byte payload(PLEN=10b).
> > +      * - IOADR = LINK/TRAN Capability Register(CFG_BASE + 004h)
> > +      */
> > +     arg = ((UHS2_DEV_CONFIG_LINK_TRAN_CAPS & 0xFF) << 8) |
> > +             UHS2_NATIVE_CMD_READ |
> > +             UHS2_NATIVE_CMD_PLEN_8B |
> > +             (UHS2_DEV_CONFIG_LINK_TRAN_CAPS >> 8);
> > +
> > +     sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, NULL, 0, NULL, 0);
> > +
> > +     err = mmc_wait_for_cmd(host, &cmd, 0);
> > +     if (err) {
> > +             pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
> > +                    mmc_hostname(host), __func__, err);
> > +             return err;
> > +     }
> > +
> > +     /*
> > +      * LINK/TRAN Capability Register:
> > +      * bit [3:0]  : LINK_TRAN Minor Revision
> > +      * bit [5:4]  : LINK/TRAN Major Revision
> > +      * bit [7:6]  : Reserved
> > +      * bit [15:8] : Device-Specific N_FCU
> > +      * bit [18:16]: Device Type
> > +      *              001b=Host
> > +      *              010b=Device
> > +      *              011b=Reserved for CMD issuable Device
> > +      * bit [19]   : Reserved
> > +      * bit [31:20]: Device-Specific MAX_BLKLEN
> > +      * bit [39:32]: Device-Specific N_DATA_GAP
> > +      * bit [63:40]: Reserved
> > +      */
> > +     cap = cmd.resp[0];
> > +     card->uhs2_config.link_minor_rev =
> > +                             cap & UHS2_DEV_CONFIG_LT_MINOR_MASK;
> > +     card->uhs2_config.link_major_rev =
> > +                             (cap >> UHS2_DEV_CONFIG_LT_MAJOR_POS) &
> > +                             UHS2_DEV_CONFIG_LT_MAJOR_MASK;
> > +     card->uhs2_config.n_fcu =
> > +                             (cap >> UHS2_DEV_CONFIG_N_FCU_POS) &
> > +                             UHS2_DEV_CONFIG_N_FCU_MASK;
> > +     card->uhs2_config.dev_type =
> > +                             (cap >> UHS2_DEV_CONFIG_DEV_TYPE_POS) &
> > +                             UHS2_DEV_CONFIG_DEV_TYPE_MASK;
> > +     card->uhs2_config.maxblk_len =
> > +                             (cap >> UHS2_DEV_CONFIG_MAX_BLK_LEN_POS) &
> > +                             UHS2_DEV_CONFIG_MAX_BLK_LEN_MASK;
> > +
> > +     cap = cmd.resp[1];
> > +     card->uhs2_config.n_data_gap =
> > +                             cap & UHS2_DEV_CONFIG_N_DATA_GAP_MASK;
> > +     if (card->uhs2_config.n_fcu == 0)
> > +             card->uhs2_config.n_fcu = 256;
> > +
> >       return 0;
> >  }
> >
> > @@ -100,26 +470,357 @@ static int sd_uhs2_config_read(struct mmc_host *host, struct mmc_card *card)
> >   */
> >  static int sd_uhs2_config_write(struct mmc_host *host, struct mmc_card *card)
> >  {
> > +     struct mmc_command cmd = {0};
> > +     struct uhs2_command uhs2_cmd = {};
> > +     u16 header, arg;
> > +     __be32 payload[UHS2_CFG_WRITE_PAYLOAD_LEN];
> > +     u8 nMinDataGap;
> > +     int err;
> > +     u8 resp[5] = {0};
> > +
> > +     /*
> > +      * Use Control Write CCMD to set Generic Setting in Configuration Register.
> > +      * - Control Write(R/W=1) with 8-Byte payload(PLEN=10b).
> > +      * - IOADR = Generic Setting Register(CFG_BASE + 008h)
> > +      * - Payload = New contents to be written to Generic Setting Register
> > +      */
> > +     header = UHS2_NATIVE_PACKET | UHS2_PACKET_TYPE_CCMD | card->uhs2_config.node_id;
> > +     arg = ((UHS2_DEV_CONFIG_GEN_SET & 0xFF) << 8) |
> > +            UHS2_NATIVE_CMD_WRITE |
> > +            UHS2_NATIVE_CMD_PLEN_8B |
> > +            (UHS2_DEV_CONFIG_GEN_SET >> 8);
> > +
> > +     /*
> > +      * Most UHS-II cards only support FD and 2L-HD mode. Other lane numbers
> > +      * defined in UHS-II addendem Ver1.01 are optional.
> > +      */
> > +     host->uhs2_caps.n_lanes_set = UHS2_DEV_CONFIG_GEN_SET_2L_FD_HD;
> > +     card->uhs2_config.n_lanes_set = UHS2_DEV_CONFIG_GEN_SET_2L_FD_HD;
> > +
> > +     payload[0] = card->uhs2_config.n_lanes_set << UHS2_DEV_CONFIG_N_LANES_POS;
> > +     payload[1] = 0;
> > +     payload[0] = cpu_to_be32(payload[0]);
> > +     payload[1] = cpu_to_be32(payload[1]);
> > +
> > +     /*
> > +      * There is no payload because per spec, there should be
> > +      * no payload field for read CCMD.
> > +      * Plen is set in arg. Per spec, plen for read CCMD
> > +      * represents the len of read data which is assigned in payload
> > +      * of following RES (p136).
> > +      */
> > +     sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, payload, UHS2_CFG_WRITE_PAYLOAD_LEN,
> > +                          NULL, 0);
> > +
> > +     err = mmc_wait_for_cmd(host, &cmd, 0);
> > +     if (err) {
> > +             pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
> > +                    mmc_hostname(host), __func__, err);
> > +             return err;
> > +     }
> > +
> > +     /*
> > +      * Use Control Write CCMD to set PHY Setting in Configuration Register.
> > +      * - Control Write(R/W=1) with 8-Byte payload(PLEN=10b).
> > +      * - IOADR = PHY Setting Register(CFG_BASE + 00Ah)
> > +      * - Payload = New contents to be written to PHY Setting Register
> > +      */
> > +     arg = ((UHS2_DEV_CONFIG_PHY_SET & 0xFF) << 8) |
> > +            UHS2_NATIVE_CMD_WRITE |
> > +            UHS2_NATIVE_CMD_PLEN_8B |
> > +            (UHS2_DEV_CONFIG_PHY_SET >> 8);
> > +
> > +     if (host->uhs2_caps.speed_range == UHS2_DEV_CONFIG_PHY_SET_SPEED_B) {
> > +             if (card->uhs2_config.n_lanes == UHS2_DEV_CONFIG_2L_HD_FD &&
> > +                 host->uhs2_caps.n_lanes == UHS2_DEV_CONFIG_2L_HD_FD) {
> > +                     /* Support HD */
> > +                     host->ios.timing = MMC_TIMING_UHS2_SPEED_B_HD;
> > +                     nMinDataGap = 1;
> > +             } else {
> > +                     /* Only support 2L-FD so far */
> > +                     host->ios.timing = MMC_TIMING_UHS2_SPEED_B;
> > +                     nMinDataGap = 3;
> > +             }
> > +             card->uhs2_config.speed_range_set = UHS2_DEV_CONFIG_PHY_SET_SPEED_B;
> > +     } else {
> > +             if (card->uhs2_config.n_lanes == UHS2_DEV_CONFIG_2L_HD_FD &&
> > +                 host->uhs2_caps.n_lanes == UHS2_DEV_CONFIG_2L_HD_FD) {
> > +                     /* Support HD */
> > +                     host->ios.timing = MMC_TIMING_UHS2_SPEED_A_HD;
> > +                     nMinDataGap = 1;
> > +             } else {
> > +                     /* Only support 2L-FD so far */
> > +                     host->ios.timing = MMC_TIMING_UHS2_SPEED_A;
> > +                     nMinDataGap = 3;
> > +             }
> > +             card->uhs2_config.speed_range_set = UHS2_DEV_CONFIG_PHY_SET_SPEED_A;
> > +     }
> > +
> > +     payload[0] = card->uhs2_config.speed_range_set << UHS2_DEV_CONFIG_PHY_SET_SPEED_POS;
> > +
> > +     card->uhs2_config.n_lss_sync_set = (max(card->uhs2_config.n_lss_sync,
> > +                                             host->uhs2_caps.n_lss_sync) >> 2) &
> > +                                        UHS2_DEV_CONFIG_N_LSS_SYN_MASK;
> > +     host->uhs2_caps.n_lss_sync_set = card->uhs2_config.n_lss_sync_set;
> > +
> > +     card->uhs2_config.n_lss_dir_set = (max(card->uhs2_config.n_lss_dir,
> > +                                            host->uhs2_caps.n_lss_dir) >> 3) &
> > +                                       UHS2_DEV_CONFIG_N_LSS_DIR_MASK;
> > +     host->uhs2_caps.n_lss_dir_set = card->uhs2_config.n_lss_dir_set;
> > +
> > +     payload[1] = (card->uhs2_config.n_lss_dir_set << UHS2_DEV_CONFIG_N_LSS_DIR_POS) |
> > +                  card->uhs2_config.n_lss_sync_set;
> > +     payload[0] = cpu_to_be32(payload[0]);
> > +     payload[1] = cpu_to_be32(payload[1]);
> > +
> > +     memset(resp, 0, sizeof(resp));
> > +
> > +     sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, payload, UHS2_CFG_WRITE_PAYLOAD_LEN,
> > +                          resp, UHS2_CFG_WRITE_PHY_SET_RESP_LEN);
> > +
> > +     err = mmc_wait_for_cmd(host, &cmd, 0);
> > +     if (err) {
> > +             pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
> > +                    mmc_hostname(host), __func__, err);
> > +             return err;
> > +     }
> > +
> > +     if ((resp[2] & 0x80)) {
> > +             pr_err("%s: %s: UHS2 CMD not accepted, resp= 0x%x!\n",
> > +                    mmc_hostname(host), __func__, resp[2]);
> > +             return -EIO;
> > +     }
> > +
> > +     /*
> > +      * Use Control Write CCMD to set LINK/TRAN Setting in Configuration Register.
> > +      * - Control Write(R/W=1) with 8-Byte payload(PLEN=10b).
> > +      * - IOADR = LINK/TRAN Setting Register(CFG_BASE + 00Ch)
> > +      * - Payload = New contents to be written to LINK/TRAN Setting Register
> > +      */
> > +     arg = ((UHS2_DEV_CONFIG_LINK_TRAN_SET & 0xFF) << 8) |
> > +             UHS2_NATIVE_CMD_WRITE |
> > +             UHS2_NATIVE_CMD_PLEN_8B |
> > +             (UHS2_DEV_CONFIG_LINK_TRAN_SET >> 8);
> > +
> > +     if (card->uhs2_config.app_type == UHS2_DEV_CONFIG_APP_SD_MEM)
> > +             card->uhs2_config.maxblk_len_set = UHS2_DEV_CONFIG_LT_SET_MAX_BLK_LEN;
> > +     else
> > +             card->uhs2_config.maxblk_len_set = min(card->uhs2_config.maxblk_len,
> > +                                                    host->uhs2_caps.maxblk_len);
> > +     host->uhs2_caps.maxblk_len_set = card->uhs2_config.maxblk_len_set;
> > +
> > +     card->uhs2_config.n_fcu_set = min(card->uhs2_config.n_fcu, host->uhs2_caps.n_fcu);
> > +     host->uhs2_caps.n_fcu_set = card->uhs2_config.n_fcu_set;
> > +
> > +     card->uhs2_config.n_data_gap_set = max(nMinDataGap, card->uhs2_config.n_data_gap);
> > +     host->uhs2_caps.n_data_gap_set = card->uhs2_config.n_data_gap_set;
> > +
> > +     host->uhs2_caps.max_retry_set = 3;
> > +     card->uhs2_config.max_retry_set = host->uhs2_caps.max_retry_set;
> > +
> > +     payload[0] = (card->uhs2_config.maxblk_len_set << UHS2_DEV_CONFIG_MAX_BLK_LEN_POS) |
> > +                  (card->uhs2_config.max_retry_set << UHS2_DEV_CONFIG_LT_SET_MAX_RETRY_POS) |
> > +                  (card->uhs2_config.n_fcu_set << UHS2_DEV_CONFIG_N_FCU_POS);
> > +     payload[1] = card->uhs2_config.n_data_gap_set;
> > +     payload[0] = cpu_to_be32(payload[0]);
> > +     payload[1] = cpu_to_be32(payload[1]);
> > +
> > +     sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, payload, UHS2_CFG_WRITE_PAYLOAD_LEN,
> > +                          NULL, 0);
> > +
> > +     err = mmc_wait_for_cmd(host, &cmd, 0);
> > +     if (err) {
> > +             pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
> > +                    mmc_hostname(host), __func__, err);
> > +             return err;
> > +     }
> > +
> > +     /*
> > +      * Use Control Write CCMD to set Config Completion(payload bit 63) in Generic Setting
> > +      * Register.
> > +      * Header:
> > +      *      - Control Write(R/W=1) with 8-Byte payload(PLEN=10b).
> > +      *      - IOADR = PGeneric Setting Register(CFG_BASE + 008h)
> > +      * Payload:
> > +      *      - bit [63]: Config Completion
> > +      *
> > +      * DLSM transits to Active state immediately when Config Completion is set to 1.
> > +      */
> > +     arg = ((UHS2_DEV_CONFIG_GEN_SET & 0xFF) << 8) |
> > +            UHS2_NATIVE_CMD_WRITE |
> > +            UHS2_NATIVE_CMD_PLEN_8B |
> > +            (UHS2_DEV_CONFIG_GEN_SET >> 8);
> > +
> > +     payload[0] = 0;
> > +     payload[1] = UHS2_DEV_CONFIG_GEN_SET_CFG_COMPLETE;
> > +     payload[0] = cpu_to_be32(payload[0]);
> > +     payload[1] = cpu_to_be32(payload[1]);
> > +
> > +     memset(resp, 0, sizeof(resp));
> > +     sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, payload, UHS2_CFG_WRITE_PAYLOAD_LEN,
> > +                          resp, UHS2_CFG_WRITE_GENERIC_SET_RESP_LEN);
> > +
> > +     err = mmc_wait_for_cmd(host, &cmd, 0);
> > +     if (err) {
> > +             pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
> > +                    mmc_hostname(host), __func__, err);
> > +             return err;
> > +     }
> > +
> > +     /* Set host Config Setting registers */
> > +     err = host->ops->uhs2_control(host, UHS2_SET_CONFIG);
> > +     if (err) {
> > +             pr_err("%s: %s: UHS2 SET_CONFIG fail!\n", mmc_hostname(host), __func__);
> > +             return err;
> > +     }
> > +
> > +     return 0;
> > +}
> > +
> > +static int sd_uhs2_go_dormant(struct mmc_host *host, u32 node_id)
> > +{
> > +     struct mmc_command cmd = {0};
> > +     struct uhs2_command uhs2_cmd = {};
> > +     u16 header, arg;
> > +     __be32 payload[1];
> > +     int err;
> > +
> > +     /* Disable Normal INT */
> > +     err = host->ops->uhs2_control(host, UHS2_DISABLE_INT);
> > +     if (err) {
> > +             pr_err("%s: %s: UHS2 DISABLE_INT fail!\n",
> > +                    mmc_hostname(host), __func__);
> > +             return err;
> > +     }
> > +
> > +     /*
> > +      * Refer to UHS-II Addendum Version 1.02 Figure 6-17 to see GO_DORMANT_STATE CCMD format.
> > +      * Header:
> > +      *      - Control Write(R/W=1) with 4-Byte payload(PLEN=01b).
> > +      *      - IOADR = CMD_BASE + 001h
> > +      * Payload:
> > +      *      - bit [7]: HBR(Entry to Hibernate Mode)
> > +      *                 1: Host intends to enter Hibernate mode during Dormant state.
> > +      *                 The default setting is 0 because hibernate is currently not supported.
> > +      */
> > +     header = UHS2_NATIVE_PACKET | UHS2_PACKET_TYPE_CCMD | node_id;
> > +     arg = ((UHS2_DEV_CMD_GO_DORMANT_STATE & 0xFF) << 8) |
> > +             UHS2_NATIVE_CMD_WRITE |
> > +             UHS2_NATIVE_CMD_PLEN_4B |
> > +             (UHS2_DEV_CMD_GO_DORMANT_STATE >> 8);
> > +
> > +     sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, payload, UHS2_GO_DORMANT_PAYLOAD_LEN,
> > +                          NULL, 0);
> > +
> > +     err = mmc_wait_for_cmd(host, &cmd, 0);
> > +     if (err) {
> > +             pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
> > +                    mmc_hostname(host), __func__, err);
> > +             return err;
> > +     }
> > +
> > +     /* Check Dormant State in Present */
> > +     err = host->ops->uhs2_control(host, UHS2_CHECK_DORMANT);
> > +     if (err)
> > +             return err;
> > +
> > +     /* Disable UHS2 card clock */
> > +     err = host->ops->uhs2_control(host, UHS2_DISABLE_CLK);
> > +     if (err)
> > +             return err;
> > +
> > +     /* Restore sd clock */
> > +     mmc_delay(5);
> > +     err = host->ops->uhs2_control(host, UHS2_ENABLE_CLK);
> > +     if (err)
> > +             return err;
> > +
> > +     /* Enable Normal INT */
> > +     err = host->ops->uhs2_control(host, UHS2_ENABLE_INT);
> > +     if (err)
> > +             return err;
> > +
> > +     /* Detect UHS2 */
> > +     err = host->ops->uhs2_control(host, UHS2_PHY_INIT);
> > +     if (err)
> > +             return err;
> > +
> >       return 0;
> >  }
> >
> > -/*
> > - * Initialize the UHS-II card through the SD-TRAN transport layer. This enables
> > - * commands/requests to be backwards compatible through the legacy SD protocol.
> > - * UHS-II cards has a specific power limit specified for VDD1/VDD2, that should
> > - * be set through a legacy CMD6. Note that, the power limit that becomes set,
> > - * survives a soft reset through the GO_DORMANT_STATE command.
> > - */
> > -static int sd_uhs2_legacy_init(struct mmc_host *host, struct mmc_card *card)
> > +static int __sd_uhs2_wait_active_state_cb(void *cb_data, bool *busy)
> >  {
> > +     struct sd_uhs2_wait_active_state_data *data = cb_data;
> > +     struct mmc_host *host = data->host;
> > +     struct mmc_command *cmd = data->cmd;
> > +     int err;
> > +
> > +     err = mmc_wait_for_cmd(host, cmd, 0);
> > +     if (err)
> > +             return err;
> > +
> > +     if (cmd->resp[1] & UHS2_DEV_CONFIG_GEN_SET_CFG_COMPLETE)
> > +             *busy = false;
> > +     else
> > +             *busy = true;
> > +
> >       return 0;
> >  }
> >
> > +static int sd_uhs2_go_dormant_state(struct mmc_host *host, u32 node_id)
> > +{
> > +     struct mmc_command cmd = {0};
> > +     struct uhs2_command uhs2_cmd = {};
> > +     u16 header, arg;
> > +     int err;
> > +     struct sd_uhs2_wait_active_state_data cb_data = {
> > +             .host = host,
> > +             .cmd = &cmd
> > +     };
> > +
> > +     err = sd_uhs2_go_dormant(host, node_id);
> > +     if (err) {
> > +             pr_err("%s: %s: UHS2 GO_DORMANT_STATE fail, err= 0x%x!\n",
> > +                    mmc_hostname(host), __func__, err);
> > +             return err;
> > +     }
> > +
> > +     /*
> > +      * Use Control Read CCMD to check Config Completion(bit 63) in Generic Setting Register.
> > +      * - Control Read(R/W=0) with 8-Byte payload(PLEN=10b).
> > +      * - IOADR = Generic Setting Register(CFG_BASE + 008h)
> > +      *
> > +      * When UHS-II card been switched to new speed mode, it will set Config Completion to 1.
> > +      */
> > +     header = UHS2_NATIVE_PACKET | UHS2_PACKET_TYPE_CCMD | node_id;
> > +     arg = ((UHS2_DEV_CONFIG_GEN_SET & 0xFF) << 8) |
> > +             UHS2_NATIVE_CMD_READ |
> > +             UHS2_NATIVE_CMD_PLEN_8B |
> > +             (UHS2_DEV_CONFIG_GEN_SET >> 8);
> > +
> > +     sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, NULL, 0, NULL, 0);
> > +     err = __mmc_poll_for_busy(host, UHS2_WAIT_CFG_COMPLETE_PERIOD_US,
> > +                               UHS2_WAIT_CFG_COMPLETE_TIMEOUT_MS,
> > +                               &__sd_uhs2_wait_active_state_cb, &cb_data);
> > +     if (err) {
> > +             pr_err("%s: %s: Not switch to Active in 100 ms\n", mmc_hostname(host), __func__);
> > +             return err;
> > +     }
> > +
> > +     return 0;
> > +}
> > +
> > +static void sd_uhs2_remove(struct mmc_host *host)
> > +{
> > +     mmc_remove_card(host->card);
> > +     host->card = NULL;
> > +}
> > +
> >  /*
> >   * Allocate the data structure for the mmc_card and run the UHS-II specific
> >   * initialization sequence.
> >   */
> > -static int sd_uhs2_init_card(struct mmc_host *host)
> > +static int sd_uhs2_init_card(struct mmc_host *host, struct mmc_card *oldcard)
> >  {
> >       struct mmc_card *card;
> >       u32 node_id;
> > @@ -133,9 +834,14 @@ static int sd_uhs2_init_card(struct mmc_host *host)
> >       if (err)
> >               return err;
> >
> > -     card = mmc_alloc_card(host, &sd_type);
> > -     if (IS_ERR(card))
> > -             return PTR_ERR(card);
> > +     if (oldcard) {
> > +             card = oldcard;
> > +     } else {
> > +             card = mmc_alloc_card(host, &sd_type);
> > +             if (IS_ERR(card))
> > +                     return PTR_ERR(card);
> > +     }
> > +     host->card = card;
> >
> >       card->uhs2_config.node_id = node_id;
> >       card->type = MMC_TYPE_SD;
> > @@ -148,18 +854,226 @@ static int sd_uhs2_init_card(struct mmc_host *host)
> >       if (err)
> >               goto err;
> >
> > -     host->card = card;
> > +     /* If change speed to Range B, need to GO_DORMANT_STATE */
> > +     if (host->ios.timing == MMC_TIMING_UHS2_SPEED_B ||
> > +         host->ios.timing == MMC_TIMING_UHS2_SPEED_B_HD) {
> > +             err = sd_uhs2_go_dormant_state(host, node_id);
> > +             if (err)
> > +                     return err;
> > +     }
> > +
> > +     host->flags |= MMC_UHS2_SD_TRAN;
> > +
> >       return 0;
> >
> >  err:
> > -     mmc_remove_card(card);
> > +     sd_uhs2_remove(host);
> >       return err;
> >  }
> >
> > -static void sd_uhs2_remove(struct mmc_host *host)
> > +int sd_uhs2_reinit(struct mmc_host *host)
> >  {
> > -     mmc_remove_card(host->card);
> > -     host->card = NULL;
> > +     struct mmc_card *card = host->card;
> > +     int err;
> > +
> > +     sd_uhs2_power_up(host);
> > +     err = sd_uhs2_phy_init(host);
> > +     if (err)
> > +             return err;
> > +
> > +     err = sd_uhs2_init_card(host, card);
> > +     if (err)
> > +             return err;
> > +
> > +     mmc_card_set_present(card);
> > +     return err;
> > +}
> > +
> > +/*
> > + * Mask off any voltages we don't support and select
> > + * the lowest voltage
> > + */
> > +u32 sd_uhs2_select_voltage(struct mmc_host *host, u32 ocr)
> > +{
> > +     int bit;
> > +     int err;
> > +
> > +     /*
> > +      * Sanity check the voltages that the card claims to
> > +      * support.
> > +      */
> > +     if (ocr & 0x7F) {
> > +             dev_warn(mmc_dev(host), "card claims to support voltages below defined range\n");
> > +             ocr &= ~0x7F;
> > +     }
> > +
> > +     ocr &= host->ocr_avail;
> > +     if (!ocr) {
> > +             dev_warn(mmc_dev(host), "no support for card's volts\n");
> > +             return 0;
> > +     }
> > +
> > +     if (host->caps2 & MMC_CAP2_FULL_PWR_CYCLE) {
> > +             bit = ffs(ocr) - 1;
> > +             ocr &= 3 << bit;
> > +             /* Power cycle */
> > +             err = sd_uhs2_power_off(host);
> > +             if (err)
> > +                     return 0;
> > +             err = sd_uhs2_reinit(host);
> > +             if (err)
> > +                     return 0;
> > +     } else {
> > +             bit = fls(ocr) - 1;
> > +             ocr &= 3 << bit;
> > +             if (bit != host->ios.vdd)
> > +                     dev_warn(mmc_dev(host), "exceeding card's volts\n");
> > +     }
> > +
> > +     return ocr;
> > +}
> > +
> > +/*
> > + * Initialize the UHS-II card through the SD-TRAN transport layer. This enables
> > + * commands/requests to be backwards compatible through the legacy SD protocol.
> > + * UHS-II cards has a specific power limit specified for VDD1/VDD2, that should
> > + * be set through a legacy CMD6. Note that, the power limit that becomes set,
> > + * survives a soft reset through the GO_DORMANT_STATE command.
> > + */
> > +static int sd_uhs2_legacy_init(struct mmc_host *host, struct mmc_card *card)
> > +{
> > +     int err;
> > +     u32 cid[4];
> > +     u32 ocr;
> > +     u32 rocr;
> > +     u8  *status;
> > +     int ro;
> > +
> > +     /* Send CMD0 to reset SD card */
> > +     err = __mmc_go_idle(host);
> > +     if (err)
> > +             return err;
> > +
> > +     mmc_delay(1);
> > +
> > +     /* Send CMD8 to communicate SD interface operation condition */
> > +     err = mmc_send_if_cond(host, host->ocr_avail);
> > +     if (err) {
> > +             dev_warn(mmc_dev(host), "CMD8 error\n");
> > +             goto err;
> > +     }
> > +
> > +     /*
> > +      * Probe SD card working voltage.
> > +      */
> > +     err = mmc_send_app_op_cond(host, 0, &ocr);
> > +     if (err)
> > +             goto err;
> > +
> > +     card->ocr = ocr;
> > +
> > +     /*
> > +      * Some SD cards claims an out of spec VDD voltage range. Let's treat
> > +      * these bits as being in-valid and especially also bit7.
> > +      */
> > +     ocr &= ~0x7FFF;
> > +     rocr = sd_uhs2_select_voltage(host, ocr);
> > +     /*
> > +      * Some cards have zero value of rocr in UHS-II mode. Assign host's
> > +      * ocr value to rocr.
> > +      */
> > +     if (!rocr)
> > +             rocr = host->ocr_avail;
> > +
> > +     rocr |= (SD_OCR_CCS | SD_OCR_XPC);
> > +
> > +     /* Wait SD power on ready */
> > +     ocr = rocr;
> > +
> > +     err = mmc_send_app_op_cond(host, ocr, &rocr);
> > +     if (err)
> > +             goto err;
> > +
> > +     err = mmc_send_cid(host, cid);
> > +     if (err)
> > +             goto err;
> > +
> > +     memcpy(card->raw_cid, cid, sizeof(card->raw_cid));
> > +     mmc_decode_cid(card);
> > +
> > +     /*
> > +      * For native busses:  get card RCA and quit open drain mode.
> > +      */
> > +     err = mmc_send_relative_addr(host, &card->rca);
> > +     if (err)
> > +             goto err;
> > +
> > +     err = mmc_sd_get_csd(card);
> > +     if (err)
> > +             goto err;
> > +
> > +     /*
> > +      * Select card, as all following commands rely on that.
> > +      */
> > +     err = mmc_select_card(card);
> > +     if (err)
> > +             goto err;
> > +
> > +     /*
> > +      * Fetch SCR from card.
> > +      */
> > +     err = mmc_app_send_scr(card);
> > +     if (err)
> > +             goto err;
> > +
> > +     err = mmc_decode_scr(card);
> > +     if (err)
> > +             goto err;
> > +
> > +     /*
> > +      * Switch to high power consumption mode.
> > +      * Even switch failed, sd card can still work at lower power consumption mode, but
> > +      * performance will be lower than high power consumption mode.
> > +      */
> > +     status = kmalloc(64, GFP_KERNEL);
> > +     if (!status)
> > +             return -ENOMEM;
> > +
> > +     if (!(card->csd.cmdclass & CCC_SWITCH)) {
> > +             pr_warn("%s: card lacks mandatory switch function, performance might suffer\n",
> > +                     mmc_hostname(card->host));
> > +     } else {
> > +             /* send CMD6 to set Maximum Power Consumption to get better performance */
> > +             err = mmc_sd_switch(card, 0, 3, SD4_SET_POWER_LIMIT_1_80W, status);
> > +             if (!err)
> > +                     err = mmc_sd_switch(card, 1, 3, SD4_SET_POWER_LIMIT_1_80W, status);
> > +
> > +             err = 0;
> > +     }
> > +
> > +     /*
> > +      * Check if read-only switch is active.
> > +      */
> > +     ro = mmc_sd_get_ro(host);
> > +     if (ro < 0) {
> > +             pr_warn("%s: host does not support read-only switch, assuming write-enable\n",
> > +                     mmc_hostname(host));
> > +     } else if (ro > 0) {
> > +             mmc_card_set_readonly(card);
> > +     }
> > +
> > +     /*
> > +      * NOTE:
> > +      * Should we read Externsion Register to check power notification feature here?
> > +      */
> > +
> > +     kfree(status);
> > +
> > +     return 0;
> > +
> > +err:
> > +     sd_uhs2_remove(host);
> > +     return err;
> >  }
> >
> >  static int sd_uhs2_alive(struct mmc_host *host)
> > @@ -181,38 +1095,181 @@ static void sd_uhs2_detect(struct mmc_host *host)
> >               mmc_claim_host(host);
> >               mmc_detach_bus(host);
> >               sd_uhs2_power_off(host);
> > +             host->flags &= ~MMC_UHS2_SUPPORT;
> >               mmc_release_host(host);
> >       }
> >  }
> >
> > +static int _sd_uhs2_suspend(struct mmc_host *host)
> > +{
> > +     struct mmc_card *card = host->card;
> > +     int err = 0;
> > +
> > +     mmc_claim_host(host);
> > +
> > +     if (mmc_card_suspended(card))
> > +             goto out;
> > +
> > +     if (mmc_sd_can_poweroff_notify(card))
> > +             err = sd_poweroff_notify(card);
> > +
> > +     if (!err) {
> > +             sd_uhs2_power_off(host);
> > +             mmc_card_set_suspended(card);
> > +     }
> > +
> > +out:
> > +     mmc_release_host(host);
> > +     return err;
> > +}
> > +
> > +/*
> > + * Callback for suspend
> > + */
> >  static int sd_uhs2_suspend(struct mmc_host *host)
> >  {
> > -     return 0;
> > +     int err;
> > +
> > +     err = _sd_uhs2_suspend(host);
> > +     if (!err) {
> > +             pm_runtime_disable(&host->card->dev);
> > +             pm_runtime_set_suspended(&host->card->dev);
> > +     }
> > +
> > +     return err;
> >  }
> >
> > +/*
> > + * This function tries to determine if the same card is still present
> > + * and, if so, restore all state to it.
> > + */
> > +static int _mmc_sd_uhs2_resume(struct mmc_host *host)
> > +{
> > +     int err = 0;
> > +
> > +     mmc_claim_host(host);
> > +
> > +     if (!mmc_card_suspended(host->card))
> > +             goto out;
> > +
> > +     /* Power up UHS2 SD card and re-initialize it. */
> > +     err = sd_uhs2_reinit(host);
> > +     mmc_card_clr_suspended(host->card);
> > +
> > +out:
> > +     mmc_release_host(host);
> > +     return err;
> > +}
> > +
> > +/*
> > + * Callback for resume
> > + */
> >  static int sd_uhs2_resume(struct mmc_host *host)
> >  {
> > +     pm_runtime_enable(&host->card->dev);
> >       return 0;
> >  }
> >
> > +/*
> > + * Callback for runtime_suspend.
> > + */
> >  static int sd_uhs2_runtime_suspend(struct mmc_host *host)
> >  {
> > -     return 0;
> > +     int err;
> > +
> > +     if (!(host->caps & MMC_CAP_AGGRESSIVE_PM))
> > +             return 0;
> > +
> > +     err = _sd_uhs2_suspend(host);
> > +     if (err)
> > +             pr_err("%s: error %d doing aggressive suspend\n", mmc_hostname(host), err);
> > +
> > +     return err;
> >  }
> >
> >  static int sd_uhs2_runtime_resume(struct mmc_host *host)
> >  {
> > -     return 0;
> > +     int err;
> > +
> > +     err = _mmc_sd_uhs2_resume(host);
> > +     if (err && err != -ENOMEDIUM)
> > +             pr_err("%s: error %d doing runtime resume\n", mmc_hostname(host), err);
> > +
> > +     return err;
> >  }
> >
> > -static int sd_uhs2_shutdown(struct mmc_host *host)
> > +static int sd_uhs2_hw_reset(struct mmc_host *host)
> >  {
> > -     return 0;
> > +     int err;
> > +
> > +     sd_uhs2_power_off(host);
> > +     /* Wait at least 1 ms according to SD spec */
> > +     mmc_delay(1);
> > +     sd_uhs2_power_up(host);
> > +
> > +     err = sd_uhs2_reinit(host);
> > +
> > +     return err;
> >  }
> >
> > -static int sd_uhs2_hw_reset(struct mmc_host *host)
> > +/*
> > + * mmc_uhs2_prepare_cmd - prepare for SD command packet
> > + * @host:    MMC host
> > + * @mrq:     MMC request
> > + *
> > + * Initialize and fill in a header and a payload of SD command packet.
> > + * The caller should allocate uhs2_command in host->cmd->uhs2_cmd in
> > + * advance.
> > + *
> > + * Return:   0 on success, non-zero error on failure
> > + */
> > +void mmc_uhs2_prepare_cmd(struct mmc_host *host, struct mmc_request *mrq)
> >  {
> > -     return 0;
> > +     struct mmc_command *cmd;
> > +     struct uhs2_command *uhs2_cmd;
> > +     u16 header, arg;
> > +     __be32 *payload;
> > +     u8 plen;
> > +
> > +     cmd = mrq->cmd;
> > +     header = host->card->uhs2_config.node_id;
> > +     if ((cmd->flags & MMC_CMD_MASK) == MMC_CMD_ADTC)
> > +             header |= UHS2_PACKET_TYPE_DCMD;
> > +     else
> > +             header |= UHS2_PACKET_TYPE_CCMD;
> > +
> > +     arg = cmd->opcode << UHS2_SD_CMD_INDEX_POS;
> > +     if (host->uhs2_app_cmd) {
> > +             arg |= UHS2_SD_CMD_APP;
> > +             host->uhs2_app_cmd = false;
> > +     }
> > +
> > +     uhs2_cmd = cmd->uhs2_cmd;
> > +     payload = uhs2_cmd->payload;
> > +     plen = 2; /* at the maximum */
> > +
> > +     if ((cmd->flags & MMC_CMD_MASK) == MMC_CMD_ADTC &&
> > +         !cmd->uhs2_tmode0_flag) {
> > +             if (mmc_card_uhs2_hd_mode(host))
> > +                     arg |= UHS2_DCMD_2L_HD_MODE;
> > +
> > +             arg |= UHS2_DCMD_LM_TLEN_EXIST;
> > +
> > +             if (cmd->data->blocks == 1 &&
> > +                 cmd->data->blksz != 512 &&
> > +                 cmd->opcode != MMC_READ_SINGLE_BLOCK &&
> > +                 cmd->opcode != MMC_WRITE_BLOCK) {
> > +                     arg |= UHS2_DCMD_TLUM_BYTE_MODE;
> > +                     payload[1] = cpu_to_be32(cmd->data->blksz);
> > +             } else {
> > +                     payload[1] = cpu_to_be32(cmd->data->blocks);
> > +             }
> > +     } else {
> > +             plen = 1;
> > +     }
> > +
> > +     payload[0] = cpu_to_be32(cmd->arg);
> > +     sd_uhs2_cmd_assemble(cmd, uhs2_cmd, header, arg, payload, plen, NULL, 0);
> >  }
> >
> >  static const struct mmc_bus_ops sd_uhs2_ops = {
> > @@ -223,7 +1280,7 @@ static const struct mmc_bus_ops sd_uhs2_ops = {
> >       .resume = sd_uhs2_resume,
> >       .runtime_suspend = sd_uhs2_runtime_suspend,
> >       .runtime_resume = sd_uhs2_runtime_resume,
> > -     .shutdown = sd_uhs2_shutdown,
> > +     .shutdown = sd_uhs2_suspend,
> >       .hw_reset = sd_uhs2_hw_reset,
> >  };
> >
> > @@ -231,6 +1288,8 @@ static int sd_uhs2_attach(struct mmc_host *host)
> >  {
> >       int err;
> >
> > +     host->flags |= MMC_UHS2_SUPPORT;
> > +
> >       err = sd_uhs2_power_up(host);
> >       if (err)
> >               goto err;
> > @@ -239,7 +1298,7 @@ static int sd_uhs2_attach(struct mmc_host *host)
> >       if (err)
> >               goto err;
> >
> > -     err = sd_uhs2_init_card(host);
> > +     err = sd_uhs2_init_card(host, NULL);
> >       if (err)
> >               goto err;
> >
> > @@ -256,21 +1315,32 @@ static int sd_uhs2_attach(struct mmc_host *host)
> >               goto remove_card;
> >
> >       mmc_claim_host(host);
> > +
> >       return 0;
> >
> >  remove_card:
> > -     mmc_remove_card(host->card);
> > -     host->card = NULL;
> > +     sd_uhs2_remove(host);
> >       mmc_claim_host(host);
> > -     mmc_detach_bus(host);
> > +
> >  err:
> > +     mmc_detach_bus(host);
> >       sd_uhs2_power_off(host);
> > +     host->flags &= ~MMC_UHS2_SUPPORT;
> >       return err;
> >  }
> >
> > +/**
> > + * mmc_attach_sd_uhs2 - select UHS2 interface
> > + * @host: MMC host
> > + *
> > + * Try to select UHS2 interface and initialize the bus for a given
> > + * frequency, @freq.
> > + *
> > + * Return:   0 on success, non-zero error on failure
> > + */
> >  int mmc_attach_sd_uhs2(struct mmc_host *host)
> >  {
> > -     int i, err = 0;
> > +     int i, err;
> >
> >       if (!(host->caps2 & MMC_CAP2_SD_UHS2))
> >               return -EOPNOTSUPP;
> > @@ -285,6 +1355,9 @@ int mmc_attach_sd_uhs2(struct mmc_host *host)
> >        */
> >       for (i = 0; i < ARRAY_SIZE(sd_uhs2_freqs); i++) {
> >               host->f_init = sd_uhs2_freqs[i];
> > +             pr_info("%s: %s: trying to init UHS-II card at %u Hz\n",
> > +                     mmc_hostname(host), __func__, host->f_init);
> > +
> >               err = sd_uhs2_attach(host);
> >               if (!err)
> >                       break;
>




[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux