Re: Consider switching to WQ_UNBOUND messages (was: Re: [PATCH v2 6/7] workqueue: Report work funcs that trigger automatic CPU_INTENSIVE mechanism)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Tejun,

On Tue, Jul 18, 2023 at 1:03 AM Tejun Heo <tj@xxxxxxxxxx> wrote:
> Can you please the following patch and see how many reports you get? Looking
> back at your reports, I think some of them probably should be converted to
> UNBOUND but we should have a better idea with the adjusted threshold.
>
> Thanks.
>
> From 8555cbd4b22e5f85eb2bdcb84fd1d1f519a0a0d3 Mon Sep 17 00:00:00 2001
> From: Tejun Heo <tj@xxxxxxxxxx>
> Date: Mon, 17 Jul 2023 12:50:02 -1000
> Subject: [PATCH] workqueue: Scale up wq_cpu_intensive_thresh_us if BogoMIPS is
>  below 1000
>
> wq_cpu_intensive_thresh_us is used to detect CPU-hogging per-cpu work items.
> Once detected, they're excluded from concurrency management to prevent them
> from blocking other per-cpu work items. If CONFIG_WQ_CPU_INTENSIVE_REPORT is
> enabled, repeat offenders are also reported so that the code can be updated.
>
> The default threshold is 10ms which is long enough to do fair bit of work on
> modern CPUs while short enough to be usually not noticeable. This
> unfortunately leads to a lot of, arguable spurious, detections on very slow
> CPUs. Using the same threshold across CPUs whose performance levels may be
> apart by multiple levels of magnitude doesn't make whole lot of sense.
>
> This patch scales up wq_cpu_intensive_thresh_us upto 1 second when BogoMIPS
> is below 1000. This is obviously very inaccurate but it doesn't have to be
> accurate to be useful. The mechanism is still useful when the threshold is
> fully scaled up and the benefits of reports are usually shared with everyone
> regardless of who's reporting, so as long as there are sufficient number of
> fast machines reporting, we don't lose much.
>
> Some (or is it all?) ARM CPUs systemtically report significantly lower
> BogoMIPS. While this doesn't break anything, given how widespread ARM CPUs
> are, it's at least a missed opportunity and it probably would be a good idea
> to teach workqueue about it.
>
> Signed-off-by: Tejun Heo <tj@xxxxxxxxxx>

Thanks!

I gave it a try on a system with an 800 MHz Cortex A9, only to discover
it makes no difference, as that machine has 1600 BogoMIPS:

workqueue: drm_fb_helper_damage_work hogged CPU for >10000us 4 times,
consider switching to WQ_UNBOUND
workqueue: drm_fb_helper_damage_work hogged CPU for >10000us 8 times,
consider switching to WQ_UNBOUND
workqueue: genpd_power_off_work_fn hogged CPU for >10000us 4 times,
consider switching to WQ_UNBOUND
workqueue: blk_mq_run_work_fn hogged CPU for >10000us 4 times,
consider switching to WQ_UNBOUND
workqueue: pm_runtime_work hogged CPU for >10000us 4 times, consider
switching to WQ_UNBOUND
workqueue: phy_state_machine hogged CPU for >10000us 4 times, consider
switching to WQ_UNBOUND
workqueue: drm_mode_rmfb_work_fn hogged CPU for >10000us 4 times,
consider switching to WQ_UNBOUND
workqueue: sync_hw_clock hogged CPU for >10000us 4 times, consider
switching to WQ_UNBOUND
workqueue: rtc_timer_do_work hogged CPU for >10000us 4 times, consider
switching to WQ_UNBOUND

Artificially low BogoMIPS numbers only happen on systems that have
the related timers (Cortex A7/A15 and later, Cortex A9 MPCore,
and arm64).

I will test on more systems, but that will probably not happen until
next week...

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds



[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux