From: Jayanthi Annadurai <jannadurai@xxxxxxxxxxx> Add support for SD6 controller on Marvell CN10K series SOCs. The existing sd4hc is not compatible with the SD6 changes. Signed-off-by: Jayanthi Annadurai <jannadurai@xxxxxxxxxxx> Signed-off-by: Piyush Malgujar <pmalgujar@xxxxxxxxxxx> --- .../devicetree/bindings/mmc/cdns,sdhci.yaml | 52 ++++++++++++++++--- 1 file changed, 45 insertions(+), 7 deletions(-) diff --git a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml index 6c40611405a08717520f4ce3a78a9cb8dd9aac69..51f44c00a50505684c7c7c49c59c1ebd8d85d5d0 100644 --- a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml @@ -4,19 +4,23 @@ $id: http://devicetree.org/schemas/mmc/cdns,sdhci.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Cadence SD/SDIO/eMMC Host Controller (SD4HC) +title: Cadence SD/SDIO/eMMC Host Controller (SD4HC, SD6HC) maintainers: - Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx> properties: compatible: - items: - - enum: - - amd,pensando-elba-sd4hc - - microchip,mpfs-sd4hc - - socionext,uniphier-sd4hc - - const: cdns,sd4hc + oneOf: + - items: + - enum: + - amd,pensando-elba-sd4hc + - microchip,mpfs-sd4hc + - socionext,uniphier-sd4hc + - const: cdns,sd4hc + + - items: + - const: marvell,cdns-sd6hc reg: minItems: 1 @@ -139,6 +143,40 @@ allOf: reg: maxItems: 1 + - if: + properties: + compatible: + contains: + const: marvell,cdns-sd6hc + + then: + properties: + marvell,iocell-input-delay-ps: + description: Delay in ps across the input IO cells + + marvell,iocell-output-delay-ps: + description: Delay in ps across the output IO cells + + marvell,delay-element-ps: + description: Delay element in ps used for calculating phy timings + + marvell,read-dqs-cmd-delay-ps: + description: Command delay used in HS200 tuning + + marvell,tune-val-start-ps: + description: Staring value of data delay used in HS200 tuning + + marvell,tune-val-step-ps: + description: Incremental value of data delay used in HS200 tuning + + required: + - marvell,iocell-input-delay-ps + - marvell,iocell-output-delay-ps + - marvell,delay-element-ps + - marvell,read-dqs-cmd-delay-ps + - marvell,tune-val-start-ps + - marvell,tune-val-step-ps + unevaluatedProperties: false examples: -- 2.17.1
