[PATCH v3 09/10] mmc: mmci: Break out a helper function

[Linus Walleij <linus.walleij@xxxxxxxxxx>]

These four lines clearing, masking and resetting the state
of the busy detect state machine is repeated five times in
the code so break this out to a small helper so things are
easier to read.

Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
ChangeLog v2->v3:
- Rebased.
ChangeLog v1->v2:
- No changes
---
 drivers/mmc/host/mmci.c | 36 ++++++++++++++++--------------------
 1 file changed, 16 insertions(+), 20 deletions(-)

diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index e80dd7e7a001..05b8fad26c10 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -654,6 +654,17 @@ static u32 ux500v2_get_dctrl_cfg(struct mmci_host *host)
 	return MCI_DPSM_ENABLE | (host->data->blksz << 16);
 }
 
+static void ux500_busy_clear_mask_done(struct mmci_host *host)
+{
+	void __iomem *base = host->base;
+
+	writel(host->variant->busy_detect_mask, base + MMCICLEAR);
+	writel(readl(base + MMCIMASK0) &
+	       ~host->variant->busy_detect_mask, base + MMCIMASK0);
+	host->busy_state = MMCI_BUSY_DONE;
+	host->busy_status = 0;
+}
+
 /*
  * ux500_busy_complete() - this will wait until the busy status
  * goes off, saving any status that occur in the meantime into
@@ -668,11 +679,7 @@ static bool ux500_busy_complete(struct mmci_host *host, u32 status, u32 err_msk)
 
 	if (status & err_msk) {
 		/* Stop any ongoing busy detection if an error occurs */
-		writel(host->variant->busy_detect_mask, base + MMCICLEAR);
-		writel(readl(base + MMCIMASK0) &
-		       ~host->variant->busy_detect_mask, base + MMCIMASK0);
-		host->busy_state = MMCI_BUSY_DONE;
-		host->busy_status = 0;
+		ux500_busy_clear_mask_done(host);
 		goto out_ret_state;
 	}
 
@@ -715,10 +722,7 @@ static bool ux500_busy_complete(struct mmci_host *host, u32 status, u32 err_msk)
 			retries--;
 		}
 		dev_dbg(mmc_dev(host->mmc), "no busy signalling in time\n");
-		writel(host->variant->busy_detect_mask, base + MMCICLEAR);
-		writel(readl(base + MMCIMASK0) &
-		       ~host->variant->busy_detect_mask, base + MMCIMASK0);
-		host->busy_state = MMCI_BUSY_DONE;
+		ux500_busy_clear_mask_done(host);
 		break;
 
 	/*
@@ -740,11 +744,7 @@ static bool ux500_busy_complete(struct mmci_host *host, u32 status, u32 err_msk)
 		} else {
 			dev_dbg(mmc_dev(host->mmc),
 				"lost busy status when waiting for busy start IRQ\n");
-			writel(host->variant->busy_detect_mask, base + MMCICLEAR);
-			writel(readl(base + MMCIMASK0) &
-			       ~host->variant->busy_detect_mask, base + MMCIMASK0);
-			host->busy_state = MMCI_BUSY_DONE;
-			host->busy_status = 0;
+			ux500_busy_clear_mask_done(host);
 		}
 		break;
 
@@ -752,15 +752,11 @@ static bool ux500_busy_complete(struct mmci_host *host, u32 status, u32 err_msk)
 		if (status & host->variant->busy_detect_flag) {
 			host->busy_status |= status & (MCI_CMDSENT | MCI_CMDRESPEND);
 			writel(host->variant->busy_detect_mask, base + MMCICLEAR);
-			host->busy_state = MMCI_BUSY_DONE;
+			ux500_busy_clear_mask_done(host);
 		} else {
 			dev_dbg(mmc_dev(host->mmc),
 				"lost busy status when waiting for busy end IRQ\n");
-			writel(host->variant->busy_detect_mask, base + MMCICLEAR);
-			writel(readl(base + MMCIMASK0) &
-			       ~host->variant->busy_detect_mask, base + MMCIMASK0);
-			host->busy_state = MMCI_BUSY_DONE;
-			host->busy_status = 0;
+			ux500_busy_clear_mask_done(host);
 		}
 		break;
 

-- 
2.40.1