Re: [PATCH v4] mmc: mtk-sd: reduce CIT for better performance

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 2023-06-06 at 11:58 +0300, Adrian Hunter wrote:
>  	 
> External email : Please do not click links or open attachments until
> you have verified the sender or the content.
>  On 5/06/23 15:14, Wenbin Mei wrote:
> > CQHCI_SSC1 indicates to CQE the polling period to use when using
> periodic
> > SEND_QUEUE_STATUS(CMD13) polling.
> > Since MSDC CQE uses msdc_hclk as ITCFVAL, so driver should use hclk
> > frequency to get the actual time.
> > The default value 0x1000 that corresponds to 150us for MediaTek
> SoCs, let's
> > decrease it to 0x40 that corresponds to 2.35us, which can improve
> the
> > performance of some eMMC devices.
> > 
> > Signed-off-by: Wenbin Mei <wenbin.mei@xxxxxxxxxxxx>
> > ---
> >  drivers/mmc/host/cqhci.h  |  1 +
> >  drivers/mmc/host/mtk-sd.c | 45
> +++++++++++++++++++++++++++++++++++++++
> >  2 files changed, 46 insertions(+)
> > 
> > diff --git a/drivers/mmc/host/cqhci.h b/drivers/mmc/host/cqhci.h
> > index ba9387ed90eb..292b89ebd978 100644
> > --- a/drivers/mmc/host/cqhci.h
> > +++ b/drivers/mmc/host/cqhci.h
> > @@ -23,6 +23,7 @@
> >  /* capabilities */
> >  #define CQHCI_CAP0x04
> >  #define CQHCI_CAP_CS0x10000000 /* Crypto Support */
> > +#define CQHCI_CAP_ITCFMUL(x)(((x) & GENMASK(15, 12)) >> 12)
> 
> Let's not open code FIELD_GET, perhaps
> 
> #define CQHCI_CAP_ITCFMULGENMASK(15, 12)
> 
> #define CQHCI_ITCFMUL(x)FIELD_GET(CQHCI_CAP_ITCFMUL,(x))
> 
Okay. I will change it.
> >  
> >  /* configuration */
> >  #define CQHCI_CFG0x08
> > diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
> > index edade0e54a0c..9f540973caff 100644
> > --- a/drivers/mmc/host/mtk-sd.c
> > +++ b/drivers/mmc/host/mtk-sd.c
> > @@ -473,6 +473,7 @@ struct msdc_host {
> >  struct msdc_tune_para def_tune_para; /* default tune setting */
> >  struct msdc_tune_para saved_tune_para; /* tune result of
> CMD21/CMD19 */
> >  struct cqhci_host *cq_host;
> > +u32 cq_ssc1_time;
> >  };
> >  
> >  static const struct mtk_mmc_compatible mt2701_compat = {
> > @@ -2450,9 +2451,48 @@ static void
> msdc_hs400_enhanced_strobe(struct mmc_host *mmc,
> >  }
> >  }
> >  
> > +static void msdc_cqe_cit_cal(struct msdc_host *host, u64 timer_ns)
> > +{
> > +struct mmc_host *mmc = mmc_from_priv(host);
> > +struct cqhci_host *cq_host = mmc->cqe_private;
> > +u8 itcfmul;
> > +u64 hclk_freq;
> > +u64 value;
> > +
> > +/* Since MSDC CQE uses msdc_hclk as ITCFVAL, so driver should use
> hclk
> > + * frequency to get the actual time for CIT.
> > + */
> > +hclk_freq = clk_get_rate(host->h_clk);
> > +itcfmul = CQHCI_CAP_ITCFMUL(cqhci_readl(cq_host, CQHCI_CAP));
> > +switch (itcfmul) {
> > +case 0x0:
> > +do_div(hclk_freq, 1000);
> > +break;
> > +case 0x1:
> > +do_div(hclk_freq, 100);
> > +break;
> > +case 0x2:
> > +do_div(hclk_freq, 10);
> > +break;
> > +case 0x3:
> > +break;
> > +case 0x4:
> > +hclk_freq = hclk_freq * 10;
> > +break;
> > +default:
> > +host->cq_ssc1_time = 0x40;
> > +return;
> > +}
> > +
> > +value = hclk_freq * timer_ns;
> > +do_div(value, 1000000000);
> > +host->cq_ssc1_time = value;
> > +}
> > +
> >  static void msdc_cqe_enable(struct mmc_host *mmc)
> >  {
> >  struct msdc_host *host = mmc_priv(mmc);
> > +struct cqhci_host *cq_host = mmc->cqe_private;
> >  
> >  /* enable cmdq irq */
> >  writel(MSDC_INT_CMDQ, host->base + MSDC_INTEN);
> > @@ -2462,6 +2502,9 @@ static void msdc_cqe_enable(struct mmc_host
> *mmc)
> >  msdc_set_busy_timeout(host, 20 * 1000000000ULL, 0);
> >  /* default read data timeout 1s */
> >  msdc_set_timeout(host, 1000000000ULL, 0);
> > +
> > +/* Set the send status command idle timer */
> > +cqhci_writel(cq_host, host->cq_ssc1_time, CQHCI_SSC1);
> 
> What about Send Status Command Block Counter (CBC) bits 19:16 ?
> 
MSDC controller does not support this feature.
> >  }
> >  
> >  static void msdc_cqe_disable(struct mmc_host *mmc, bool recovery)
> > @@ -2803,6 +2846,8 @@ static int msdc_drv_probe(struct
> platform_device *pdev)
> >  /* cqhci 16bit length */
> >  /* 0 size, means 65536 so we don't have to -1 here */
> >  mmc->max_seg_size = 64 * 1024;
> > +/* Reduce CIT to 0x40 that corresponds to 2.35us */
> > +msdc_cqe_cit_cal(host, 2350);
> >  }
> >  
> >  ret = devm_request_irq(&pdev->dev, host->irq, msdc_irq,
> 




[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux