On 23/05/23 14:11, Chevron Li wrote:
> From: Chevron Li <chevron.li@xxxxxxxxxxxxxx>
>
> Bayhub SD host has hardware limitation:
> 1.The upper 32bit address is inhibited to be written at SD Host Register
> [03E][13]=0 (32bits addressing) mode, is admitted to be written only at
> SD Host Register [03E][13]=1 (64bits addressing) mode.
> 2.Because of above item#1, need to configure SD Host Register [03E][13] to
> 1(64bits addressing mode) before set 64bit ADMA system address's higher
> 32bits SD Host Register [05F~05C] if 64 bits addressing mode is used.
>
> The hardware limitation is reasonable for below reasons:
> 1.Normal flow should set DMA working mode first, then do
> DMA-transfer-related configuration, such as system address.
> 2.The hardware limitation may avoid the software to configure wrong higher
> 32bit address at 32bits addressing mode although it is redundant.
>
> The change that set 32bits/64bits addressing mode before set ADMA address,
> has no side-effect to other host IPs for below reason:
> The setting order is reasonable and standard: DMA Mode setting first and
> then DMA address setting. It meets all DMA setting sequence.
>
> Signed-off-by: Chevron Li <chevron.li@xxxxxxxxxxxxxx>
It should be OK.
Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
> ---
> Change in V1:
> Set dma mode configure before set dma address
> ---
> drivers/mmc/host/sdhci.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index 3241916141d7..ff41aa56564e 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -1167,6 +1167,8 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
> }
> }
>
> + sdhci_config_dma(host);
> +
> if (host->flags & SDHCI_REQ_USE_DMA) {
> int sg_cnt = sdhci_pre_dma_transfer(host, data, COOKIE_MAPPED);
>
> @@ -1186,8 +1188,6 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
> }
> }
>
> - sdhci_config_dma(host);
> -
> if (!(host->flags & SDHCI_REQ_USE_DMA)) {
> int flags;
>
>
> base-commit: cc3c44c9fda264c6d401be04e95449a57c1231c6
