Re: [PATCH v2 2/2] mmc: sdhci-npcm: Add NPCM SDHCI driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 17 Mar 2023 at 15:16, Guenter Roeck <linux@xxxxxxxxxxxx> wrote:
>
> On Mon, Dec 05, 2022 at 10:53:51AM +0200, Tomer Maimon wrote:
> > Add Nuvoton NPCM BMC sdhci-pltfm controller driver.
> >
> > Signed-off-by: Tomer Maimon <tmaimon77@xxxxxxxxx>
>
> I still don't see this driver in the upstream kernel, or in linux-next.

Tomer, Guenter,

Looks like I may have missed picking it up, probably because I thought
the review was still ongoing.

Please re-submit and include the reviewed-by tags, etc.

Kind regards
Uffe

>
> Couple of comments:
>
> - devm ordering does not really matter here. The devm resource
>   is the clock, it does not depend on local data, and it will be
>   released last, so that is ok.
> - sdhci_pltfm_unregister() calls clk_disable_unprepare(),
>   so there is no enabled clock floating around on driver removal.
>   Unfortunately, that also means that the more convenient
>   devm_clk_get_optional_enabled() can not be used.
>
> Real problem inline below.
>
> Guenter
>
> > ---
> >  drivers/mmc/host/Kconfig      |  8 ++++
> >  drivers/mmc/host/Makefile     |  1 +
> >  drivers/mmc/host/sdhci-npcm.c | 84 +++++++++++++++++++++++++++++++++++
> >  3 files changed, 93 insertions(+)
> >  create mode 100644 drivers/mmc/host/sdhci-npcm.c
> >
> > diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> > index fb1062a6394c..82ab6fc25dca 100644
> > --- a/drivers/mmc/host/Kconfig
> > +++ b/drivers/mmc/host/Kconfig
> > @@ -415,6 +415,14 @@ config MMC_SDHCI_MILBEAUT
> >
> >         If unsure, say N.
> >
> > +config MMC_SDHCI_NPCM
> > +     tristate "Secure Digital Host Controller Interface support for NPCM"
> > +     depends on ARCH_NPCM || COMPILE_TEST
> > +     depends on MMC_SDHCI_PLTFM
> > +     help
> > +       This provides support for the SD/eMMC controller found in
> > +       NPCM BMC family SoCs.
> > +
> >  config MMC_SDHCI_IPROC
> >       tristate "SDHCI support for the BCM2835 & iProc SD/MMC Controller"
> >       depends on ARCH_BCM2835 || ARCH_BCM_IPROC || ARCH_BRCMSTB || COMPILE_TEST
> > diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
> > index 4e4ceb32c4b4..a101f87a5f19 100644
> > --- a/drivers/mmc/host/Makefile
> > +++ b/drivers/mmc/host/Makefile
> > @@ -97,6 +97,7 @@ obj-$(CONFIG_MMC_SDHCI_MICROCHIP_PIC32)     += sdhci-pic32.o
> >  obj-$(CONFIG_MMC_SDHCI_BRCMSTB)              += sdhci-brcmstb.o
> >  obj-$(CONFIG_MMC_SDHCI_OMAP)         += sdhci-omap.o
> >  obj-$(CONFIG_MMC_SDHCI_SPRD)         += sdhci-sprd.o
> > +obj-$(CONFIG_MMC_SDHCI_NPCM)         += sdhci-npcm.o
> >  obj-$(CONFIG_MMC_CQHCI)                      += cqhci.o
> >  cqhci-y                                      += cqhci-core.o
> >  cqhci-$(CONFIG_MMC_CRYPTO)           += cqhci-crypto.o
> > diff --git a/drivers/mmc/host/sdhci-npcm.c b/drivers/mmc/host/sdhci-npcm.c
> > new file mode 100644
> > index 000000000000..beace15b6c00
> > --- /dev/null
> > +++ b/drivers/mmc/host/sdhci-npcm.c
> > @@ -0,0 +1,84 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * NPCM SDHC MMC host controller driver.
> > + *
> > + * Copyright (c) 2020 Nuvoton Technology corporation.
> > + */
> > +
> > +#include <linux/clk.h>
> > +#include <linux/err.h>
> > +#include <linux/io.h>
> > +#include <linux/mmc/host.h>
> > +#include <linux/mmc/mmc.h>
> > +#include <linux/module.h>
> > +
> > +#include "sdhci-pltfm.h"
> > +
> > +static const struct sdhci_pltfm_data npcm_sdhci_pdata = {
> > +     .quirks  = SDHCI_QUIRK_DELAY_AFTER_POWER,
> > +     .quirks2 = SDHCI_QUIRK2_STOP_WITH_TC |
> > +                SDHCI_QUIRK2_NO_1_8_V,
> > +};
> > +
> > +static int npcm_sdhci_probe(struct platform_device *pdev)
> > +{
> > +     struct sdhci_pltfm_host *pltfm_host;
> > +     struct sdhci_host *host;
> > +     u32 caps;
> > +     int ret;
> > +
> > +     host = sdhci_pltfm_init(pdev, &npcm_sdhci_pdata, 0);
> > +     if (IS_ERR(host))
> > +             return PTR_ERR(host);
> > +
> > +     pltfm_host = sdhci_priv(host);
> > +
> > +     pltfm_host->clk = devm_clk_get_optional(&pdev->dev, NULL);
> > +     if (IS_ERR(pltfm_host->clk))
> > +             return PTR_ERR(pltfm_host->clk);
> > +
> > +     ret = clk_prepare_enable(pltfm_host->clk);
> > +     if (ret)
> > +             return ret;
> > +
>
> The two functions above should not return but goto the call
> to sdhci_pltfm_free() to avoid a memory leak on error.
>
> > +     caps = sdhci_readl(host, SDHCI_CAPABILITIES);
> > +     if (caps & SDHCI_CAN_DO_8BIT)
> > +             host->mmc->caps |= MMC_CAP_8_BIT_DATA;
> > +
> > +     ret = mmc_of_parse(host->mmc);
> > +     if (ret)
> > +             goto err_sdhci_add;
> > +
> > +     ret = sdhci_add_host(host);
> > +     if (ret)
> > +             goto err_sdhci_add;
> > +
> > +     return 0;
> > +
> > +err_sdhci_add:
> > +     clk_disable_unprepare(pltfm_host->clk);
> > +     sdhci_pltfm_free(pdev);
> > +     return ret;
> > +}
> > +
> > +static const struct of_device_id npcm_sdhci_of_match[] = {
> > +     { .compatible = "nuvoton,npcm750-sdhci" },
> > +     { .compatible = "nuvoton,npcm845-sdhci" },
> > +     { }
> > +};
> > +MODULE_DEVICE_TABLE(of, npcm_sdhci_of_match);
> > +
> > +static struct platform_driver npcm_sdhci_driver = {
> > +     .driver = {
> > +             .name   = "npcm-sdhci",
> > +             .of_match_table = npcm_sdhci_of_match,
> > +             .pm     = &sdhci_pltfm_pmops,
> > +     },
> > +     .probe          = npcm_sdhci_probe,
> > +     .remove         = sdhci_pltfm_unregister,
> > +};
> > +module_platform_driver(npcm_sdhci_driver);
> > +
> > +MODULE_DESCRIPTION("NPCM Secure Digital Host Controller Interface driver");
> > +MODULE_AUTHOR("Tomer Maimon <tomer.maimon@xxxxxxxxxxx>");
> > +MODULE_LICENSE("GPL");
> > --
> > 2.33.0
> >



[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux