[PATCH 0/2] dw_mmc: fix DW MMC cores with 32-bit bus on 64-bit Linux systems

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


DesignWare MMC cores have a configurable data bus width of either 16, 32, or 64
bytes. It is possible, and some vendors actually do it, to ship a DW MMC core
configured for 32-bit data bus within a 64-bit SoC. In this case the kernel
will attempt 64-bit (readq) accesses to certain 64-bit MMIO registers, while
the core will expect pairs of 32-bit accesses.

It seems that currently the only register for which the kernel performs 64-bit
accesses is the FIFO. The symptom is that the DW MMC core never receives a read
on the second half of the register, does not register the datum as being read,
and thus not advancing its internal FIFO pointer, breaking further reads. It
also seems that this FIFO is only used for small (less than 16 bytes)
transfers, which probably means that only some SDIO cards are affected.

Sergey Lisov (2):
  devicetree: synopsys-dw-mshc-common: add "fifo-access-32bit" property
  dw_mmc: add an option to force 32-bit accesses to 64-bit device

 .../bindings/mmc/synopsys-dw-mshc-common.yaml |   6 +
 drivers/mmc/host/dw_mmc.c                     | 125 +++++++++++++++++-
 drivers/mmc/host/dw_mmc.h                     |   2 +
 3 files changed, 131 insertions(+), 2 deletions(-)


[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux