Currently .get_max_clock returns the current clock rate for cclk_emmc
on rk35xx, thus max clock gets set to whatever bootloader set it to.
In case of u-boot, it is intentionally reset to 50 MHz if it boots
from eMMC, see mmc_deinit() in u-boot sources. As a result, HS200 and
HS400 modes are never selected by Linux, because dwcmshc_rk35xx_postinit
clears appropriate caps if host->mmc->f_max is < 52MHz
cclk_emmc is not a fixed clock on rk35xx, so using
sdhci_pltfm_clk_get_max_clock is not appropriate here.
Implement rk35xx_get_max_clock that returns actual max clock for cclk_emmc.
Signed-off-by: Vasily Khoruzhick <anarsoul@xxxxxxxxx>
---
drivers/mmc/host/sdhci-of-dwcmshc.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c
index d1490469184b..e68cd87998c8 100644
--- a/drivers/mmc/host/sdhci-of-dwcmshc.c
+++ b/drivers/mmc/host/sdhci-of-dwcmshc.c
@@ -126,6 +126,13 @@ static unsigned int dwcmshc_get_max_clock(struct sdhci_host *host)
return pltfm_host->clock;
}
+static unsigned int rk35xx_get_max_clock(struct sdhci_host *host)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+
+ return clk_round_rate(pltfm_host->clk, ULONG_MAX);
+}
+
static void dwcmshc_check_auto_cmd23(struct mmc_host *mmc,
struct mmc_request *mrq)
{
@@ -343,7 +350,7 @@ static const struct sdhci_ops sdhci_dwcmshc_rk35xx_ops = {
.set_clock = dwcmshc_rk3568_set_clock,
.set_bus_width = sdhci_set_bus_width,
.set_uhs_signaling = dwcmshc_set_uhs_signaling,
- .get_max_clock = sdhci_pltfm_clk_get_max_clock,
+ .get_max_clock = rk35xx_get_max_clock,
.reset = rk35xx_sdhci_reset,
.adma_write_desc = dwcmshc_adma_write_desc,
};
--
2.39.2
