On Fri, 3 Feb 2023 at 09:19, William Qiu <william.qiu@xxxxxxxxxxxxxxxx> wrote: > > Hi, > > This patchset adds initial rudimentary support for the StarFive > designware mobile storage host controller driver. And this driver will > be used in StarFive's VisionFive 2 board. The main purpose of adding > this driver is to accommodate the ultra-high speed mode of eMMC. > > The last patch should be applied after the patchset [1]: > [1] https://lore.kernel.org/all/20221220011247.35560-1-hal.feng@xxxxxxxxxxxxxxxx/ > > Changes since v2: > - Wraped commit message according to Linux coding style. > - Rephrased the description of the patches. > - Changed the description of syscon regsiter. > - Dropped redundant properties. > > The patch series is based on v6.1. > > William Qiu (3): > dt-bindings: mmc: Add StarFive MMC module > mmc: starfive: Add sdio/emmc driver support > riscv: dts: starfive: Add mmc node > > .../bindings/mmc/starfive,jh7110-mmc.yaml | 77 ++++++++ > MAINTAINERS | 6 + > .../jh7110-starfive-visionfive-2.dtsi | 23 +++ > arch/riscv/boot/dts/starfive/jh7110.dtsi | 37 ++++ > drivers/mmc/host/Kconfig | 10 + > drivers/mmc/host/Makefile | 1 + > drivers/mmc/host/dw_mmc-starfive.c | 185 ++++++++++++++++++ > 7 files changed, 339 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mmc/starfive,jh7110-mmc.yaml > create mode 100644 drivers/mmc/host/dw_mmc-starfive.c > Patch 1 and patch 2 applied for next, thanks! Note that I fixed some checkpatch errors/warnings. Next time, please run ./scripts/checkpatch.pl before you submit your patches. Kind regards Uffe
