Let's align to the common busy polling behaviour for mmc ioctls, by
updating the below two corresponding parts, that comes into play when using
an R1B response for a command.
*) A command with an R1B response should be prepared by calling
mmc_prepare_busy_cmd(), which make us respects the host's busy timeout
constraints.
**) When an R1B response is being used and the host also supports HW busy
detection, we should skip to poll for busy completion.
Suggested-by: Christian Loehle <cloehle@xxxxxxxxxxxxxx>
Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
---
drivers/mmc/core/block.c | 25 +++++++++++++++++--------
drivers/mmc/core/mmc_ops.c | 1 +
2 files changed, 18 insertions(+), 8 deletions(-)
diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
index 20da7ed43e6d..672ab90c4b2d 100644
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -470,6 +470,8 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,
struct mmc_data data = {};
struct mmc_request mrq = {};
struct scatterlist sg;
+ bool r1b_resp, use_r1b_resp = false;
+ unsigned int busy_timeout_ms;
int err;
unsigned int target_part;
@@ -545,6 +547,13 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,
(cmd.opcode == MMC_SWITCH))
return mmc_sanitize(card, idata->ic.cmd_timeout_ms);
+ /* If it's an R1B response we need some more preparations. */
+ busy_timeout_ms = idata->ic.cmd_timeout_ms ? : MMC_BLK_TIMEOUT_MS;
+ r1b_resp = (cmd.flags & MMC_RSP_R1B) == MMC_RSP_R1B;
+ if (r1b_resp)
+ use_r1b_resp = mmc_prepare_busy_cmd(card->host, &cmd,
+ busy_timeout_ms);
+
mmc_wait_for_req(card->host, &mrq);
memcpy(&idata->ic.response, cmd.resp, sizeof(cmd.resp));
@@ -596,14 +605,14 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,
if (idata->ic.postsleep_min_us)
usleep_range(idata->ic.postsleep_min_us, idata->ic.postsleep_max_us);
- if (idata->rpmb || (cmd.flags & MMC_RSP_R1B) == MMC_RSP_R1B) {
- /*
- * Ensure RPMB/R1B command has completed by polling CMD13 "Send Status". Here we
- * allow to override the default timeout value if a custom timeout is specified.
- */
- err = mmc_poll_for_busy(card, idata->ic.cmd_timeout_ms ? : MMC_BLK_TIMEOUT_MS,
- false, MMC_BUSY_IO);
- }
+ /* No need to poll when using HW busy detection. */
+ if ((card->host->caps & MMC_CAP_WAIT_WHILE_BUSY) && use_r1b_resp)
+ return 0;
+
+ /* Ensure RPMB/R1B command has completed by polling with CMD13. */
+ if (idata->rpmb || r1b_resp)
+ err = mmc_poll_for_busy(card, busy_timeout_ms, false,
+ MMC_BUSY_IO);
return err;
}
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index 81c55bfd6e0c..3b3adbddf664 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -575,6 +575,7 @@ bool mmc_prepare_busy_cmd(struct mmc_host *host, struct mmc_command *cmd,
cmd->busy_timeout = timeout_ms;
return true;
}
+EXPORT_SYMBOL_GPL(mmc_prepare_busy_cmd);
/**
* __mmc_switch - modify EXT_CSD register
--
2.34.1
