For Rockchip platform, DLL bypass bit and start bit need to be set if
DLL is not locked. And adjust pre-change delay to 0x3 for better signal
test result.
Signed-off-by: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
---
drivers/mmc/host/sdhci-of-dwcmshc.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c
index 4933867..46b1ce7 100644
--- a/drivers/mmc/host/sdhci-of-dwcmshc.c
+++ b/drivers/mmc/host/sdhci-of-dwcmshc.c
@@ -48,6 +48,7 @@
#define DWCMSHC_EMMC_DLL_RXCLK_SRCSEL 29
#define DWCMSHC_EMMC_DLL_START_POINT 16
#define DWCMSHC_EMMC_DLL_INC 8
+#define DWCMSHC_EMMC_DLL_BYPASS BIT(24)
#define DWCMSHC_EMMC_DLL_DLYENA BIT(27)
#define DLL_TXCLK_TAPNUM_DEFAULT 0x10
#define DLL_TXCLK_TAPNUM_90_DEGREES 0xA
@@ -60,6 +61,7 @@
#define DLL_RXCLK_NO_INVERTER 1
#define DLL_RXCLK_INVERTER 0
#define DLL_CMDOUT_TAPNUM_90_DEGREES 0x8
+#define DLL_RXCLK_ORI_GATE BIT(31)
#define DLL_CMDOUT_TAPNUM_FROM_SW BIT(24)
#define DLL_CMDOUT_SRC_CLK_NEG BIT(28)
#define DLL_CMDOUT_EN_SRC_CLK_NEG BIT(29)
@@ -234,9 +236,12 @@ static void dwcmshc_rk3568_set_clock(struct sdhci_host *host, unsigned int clock
sdhci_writel(host, extra, reg);
if (clock <= 52000000) {
- /* Disable DLL and reset both of sample and drive clock */
- sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_CTRL);
- sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_RXCLK);
+ /*
+ * Disable DLL and reset both of sample and drive clock.
+ * The bypass bit and start bit need to be set if DLL is not locked.
+ */
+ sdhci_writel(host, DWCMSHC_EMMC_DLL_BYPASS | DWCMSHC_EMMC_DLL_START, DWCMSHC_EMMC_DLL_CTRL);
+ sdhci_writel(host, DLL_RXCLK_ORI_GATE, DWCMSHC_EMMC_DLL_RXCLK);
sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_TXCLK);
sdhci_writel(host, 0, DECMSHC_EMMC_DLL_CMDOUT);
/*
@@ -279,7 +284,7 @@ static void dwcmshc_rk3568_set_clock(struct sdhci_host *host, unsigned int clock
}
extra = 0x1 << 16 | /* tune clock stop en */
- 0x2 << 17 | /* pre-change delay */
+ 0x3 << 17 | /* pre-change delay */
0x3 << 19; /* post-change delay */
sdhci_writel(host, extra, dwc_priv->vendor_specific_area1 + DWCMSHC_EMMC_ATCTRL);
--
2.7.4
