On 13/12/22 11:00, Victor Shih wrote:
> The current print of the bus speed mode in mmc_add_card() has grown over
> the years and is now difficult to parse. Let's clean up the code and also
> take the opportunity to properly announce "DDR" for eMMCs as
> "high speed DDR", which is according to the eMMC spec.
>
> Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
> Signed-off-by: Victor Shih <victor.shih@xxxxxxxxxxxxxxxxxxx>
> ---
> drivers/mmc/core/bus.c | 35 ++++++++++++++++++++---------------
> 1 file changed, 20 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c
> index 36679f4e9acc..bbbbdbca5366 100644
> --- a/drivers/mmc/core/bus.c
> +++ b/drivers/mmc/core/bus.c
> @@ -299,6 +299,7 @@ int mmc_add_card(struct mmc_card *card)
> {
> int ret;
> const char *type;
> + const char *speed_mode = "";
> const char *uhs_bus_speed_mode = "";
> static const char *const uhs_speeds[] = {
> [UHS_SDR12_BUS_SPEED] = "SDR12 ",
> @@ -337,25 +338,29 @@ int mmc_add_card(struct mmc_card *card)
> break;
> }
>
> + if (mmc_card_hs(card))
> + speed_mode = "high speed ";
> + else if (mmc_card_uhs(card))
> + speed_mode = "ultra high speed ";
> + else if (mmc_card_ddr52(card))
> + speed_mode = "high speed DDR ";
> + else if (mmc_card_hs200(card))
> + speed_mode = "HS200 ";
> + else if (mmc_card_hs400es(card))
> + speed_mode = "HS400 Enhanced strobe ";
> + else if (mmc_card_hs400(card))
> + speed_mode = "HS400 ";
> +
> if (mmc_card_uhs(card) &&
> (card->sd_bus_speed < ARRAY_SIZE(uhs_speeds)))
> uhs_bus_speed_mode = uhs_speeds[card->sd_bus_speed];
>
> - if (mmc_host_is_spi(card->host)) {
> - pr_info("%s: new %s%s%s card on SPI\n",
> - mmc_hostname(card->host),
> - mmc_card_hs(card) ? "high speed " : "",
> - mmc_card_ddr52(card) ? "DDR " : "",
> - type);
> - } else {
> - pr_info("%s: new %s%s%s%s%s%s card at address %04x\n",
> - mmc_hostname(card->host),
> - mmc_card_uhs(card) ? "ultra high speed " :
> - (mmc_card_hs(card) ? "high speed " : ""),
> - mmc_card_hs400(card) ? "HS400 " :
> - (mmc_card_hs200(card) ? "HS200 " : ""),
> - mmc_card_hs400es(card) ? "Enhanced strobe " : "",
> - mmc_card_ddr52(card) ? "DDR " : "",
> + if (mmc_host_is_spi(card->host))
> + pr_info("%s: new %s%s card on SPI\n",
> + mmc_hostname(card->host), speed_mode, type);
> + else {
This bracket wasn't in V5. Brackets should be on both
branches of the if-clause or neither.
> + pr_info("%s: new %s%s%s card at address %04x\n",
> + mmc_hostname(card->host), speed_mode,
> uhs_bus_speed_mode, type, card->rca);
> }
>
