Hi, This patchset adds initial rudimentary support for the StarFive designware mobile storage host controller driver. And this driver will be used in StarFive's VisionFive 2 board. The main purpose of adding this driver is to accommodate the ultra-high speed mode of eMMC. The last patch should be applied after the patchset [1]: [1] https://lore.kernel.org/all/20221118011714.70877-1-hal.feng@xxxxxxxxxxxxxxxx/ Changes since v1: - Renamed the dt-binding 'starfive,jh7110-sdio.yaml' to 'starfive,jh7110-mmc.yaml'. - Changed the type of 'starfive,syscon' and modify its description. - Deleted unused head files like '#include <linux/gpio.h>'. - Added comment for the 'rise_point' and 'fall_point'. - Changed the API 'num_caps' to 'common_caps'. - Changed the node name 'sys_syscon' to 'syscon'. - Changed the node name 'sdio' to 'mmc'. The patch series is based on v6.1-rc5. William Qiu (3): dt-bindings: mmc: Add bindings for StarFive mmc: starfive: Add sdio/emmc driver support riscv: dts: starfive: Add mmc node .../bindings/mmc/starfive,jh7110-mmc.yaml | 72 +++++++ MAINTAINERS | 6 + .../jh7110-starfive-visionfive-v2.dts | 25 +++ arch/riscv/boot/dts/starfive/jh7110.dtsi | 38 ++++ drivers/mmc/host/Kconfig | 10 + drivers/mmc/host/Makefile | 1 + drivers/mmc/host/dw_mmc-starfive.c | 185 ++++++++++++++++++ 7 files changed, 337 insertions(+) create mode 100644 Documentation/devicetree/bindings/mmc/starfive,jh7110-mmc.yaml create mode 100644 drivers/mmc/host/dw_mmc-starfive.c -- 2.34.1
